Crf 450rwe!!!!

plano67
Profile picture for user plano67
Posts
188
Joined
11/15/2019
Location
Simi Valley, CA US
plano67 1/2/2021 9:54pm
1/2/2021 9:54pm
Has anyone seen any Works Edition in California or in the West coast states?
doright507
Profile picture for user doright507
Posts
29
Joined
1/5/2017
Location
No where, NY US
doright507 1/3/2021 3:42pm
1/3/2021 3:42pm
Little bit of an update, did my heat cycles on the bike and didn’t feel any problems with the ecu, I’m working on greasing the chassis and stuff now and putting on a few extra goodies, then going to put a real day of moto in. So far so good with ECU, so don’t believe the hype. RWE seems good thus far!
2
Meister
Profile picture for user Meister
Posts
2553
Joined
3/21/2013
Location
Canton, OH US
Meister 1/3/2021 5:45pm
1/3/2021 5:45pm
I have yet to start mine. Im in ohio and it's a swamp or snowing. I got some goodies on the way anyhow..
1
mxrider118 1/3/2021 6:27pm
1/3/2021 6:27pm
Wolfey wrote:
[img]https://p.vitalmx.com/photos/forums/2020/12/31/469203/s1200_image.jpg[/img] I just got some twin air filters and their power flow set up that eliminates the backfire screen. I prefer the traditional bolt system over...

I just got some twin air filters and their power flow set up that eliminates the backfire screen. I prefer the traditional bolt system over the wire clamp setup .
mxrider118 wrote:
Hey Wolfey! I cant seem to find these anywhere, could you share with you got it please
Wolfey wrote:
Yep . www.dominuscorp.com
Took about a week or so to get them.
Does the stock WE filter filter this powerflow kit. stupid question I know
1

The Shop

See All »
nick610s
Profile picture for user nick610s
Posts
131
Joined
10/28/2018
Location
Yuba City, CA US
nick610s 1/3/2021 9:40pm
1/3/2021 9:40pm
plano67 wrote:
Has anyone seen any Works Edition in California or in the West coast states?
I’ve heard of them showing up in Oregon and Washington.. I heard from a reliable source that the ship with the bikes on it hasn’t been unloaded due to a covid breakout of the Dock workers in LA.
plano67
Profile picture for user plano67
Posts
188
Joined
11/15/2019
Location
Simi Valley, CA US
plano67 1/3/2021 9:51pm
1/3/2021 9:51pm
nick610s wrote:
I’ve heard of them showing up in Oregon and Washington.. I heard from a reliable source that the ship with the bikes on it hasn’t been...
I’ve heard of them showing up in Oregon and Washington.. I heard from a reliable source that the ship with the bikes on it hasn’t been unloaded due to a covid breakout of the Dock workers in LA.
Thanks for the update. 👍
Pink
Profile picture for user Pink
Posts
161
Joined
1/31/2020
Location
Greenville, SC US
Pink 1/4/2021 2:17am
1/4/2021 2:17am
mxrider118 wrote:
Hey Wolfey! I cant seem to find these anywhere, could you share with you got it please
Wolfey wrote:
Yep . www.dominuscorp.com
Took about a week or so to get them.
mxrider118 wrote:
Does the stock WE filter filter this powerflow kit. stupid question I know
No, just plastic cage.
Meister
Profile picture for user Meister
Posts
2553
Joined
3/21/2013
Location
Canton, OH US
Meister 1/4/2021 6:01am
1/4/2021 6:01am
Ok, what has to be done to run xtrigs?
mxrider118 1/4/2021 9:45am
1/4/2021 9:45am
Wolfey wrote:
Yep . www.dominuscorp.com
Took about a week or so to get them.
mxrider118 wrote:
Does the stock WE filter filter this powerflow kit. stupid question I know
Pink wrote:
No, just plastic cage.
so you would need specific filter for the flow kit then?
KirkChandler
Profile picture for user KirkChandler
Posts
1667
Joined
7/31/2015
Location
Oceanside, CA US
Fantasy
278th
KirkChandler 1/4/2021 2:35pm
1/4/2021 2:35pm
plano67 wrote:
Has anyone seen any Works Edition in California or in the West coast states?
Not yet. My dealer in San Diego hasn’t gotten an update. My dad has his name on one.
Meister
Profile picture for user Meister
Posts
2553
Joined
3/21/2013
Location
Canton, OH US
Meister 1/4/2021 5:24pm
1/4/2021 5:24pm
mxrider118 wrote:
Does the stock WE filter filter this powerflow kit. stupid question I know
Pink wrote:
No, just plastic cage.
mxrider118 wrote:
so you would need specific filter for the flow kit then?
I believe you do. Without the backfire screen I think they use a different material incase of flame getting to filter.

Someone correct me if I'm wrong.

How many people run regular filters with a redneck removed screen?
Wolfey
Profile picture for user Wolfey
Posts
260
Joined
12/7/2015
Location
IL US
Wolfey 1/4/2021 6:09pm
1/4/2021 6:09pm
Pink wrote:
No, just plastic cage.
mxrider118 wrote:
so you would need specific filter for the flow kit then?
Meister wrote:
I believe you do. Without the backfire screen I think they use a different material incase of flame getting to filter. Someone correct me if I'm...
I believe you do. Without the backfire screen I think they use a different material incase of flame getting to filter.

Someone correct me if I'm wrong.

How many people run regular filters with a redneck removed screen?
Yep it’s supposedly a special non flammable filter. The oem filter won’t work.There’s no hole with a rubber grommet for the bolt.
mxrider118 1/4/2021 6:21pm
1/4/2021 6:21pm
mxrider118 wrote:
so you would need specific filter for the flow kit then?
Meister wrote:
I believe you do. Without the backfire screen I think they use a different material incase of flame getting to filter. Someone correct me if I'm...
I believe you do. Without the backfire screen I think they use a different material incase of flame getting to filter.

Someone correct me if I'm wrong.

How many people run regular filters with a redneck removed screen?
Wolfey wrote:
Yep it’s supposedly a special non flammable filter. The oem filter won’t work.There’s no hole with a rubber grommet for the bolt.
would you need a special filter if you remove the stock backfire screen
Bennett59
Profile picture for user Bennett59
Posts
862
Joined
9/3/2015
Location
Bakersfield, CA US
Bennett59 1/4/2021 11:35pm
1/4/2021 11:35pm
Meister wrote:
I believe you do. Without the backfire screen I think they use a different material incase of flame getting to filter. Someone correct me if I'm...
I believe you do. Without the backfire screen I think they use a different material incase of flame getting to filter.

Someone correct me if I'm wrong.

How many people run regular filters with a redneck removed screen?
Wolfey wrote:
Yep it’s supposedly a special non flammable filter. The oem filter won’t work.There’s no hole with a rubber grommet for the bolt.
mxrider118 wrote:
would you need a special filter if you remove the stock backfire screen
Depending on how the air filter cages are on the 21s, my 17 cage the screen if you bent some tabs could come off and have no screen. You can run it without special air filter they just have the option of non flammable filters for piece of mind or non flammable air filter oil. Sometimes they could catch on fire just rare if it does happen.
Racer_336
Profile picture for user Racer_336
Posts
132
Joined
12/8/2020
Location
Trinity, NC US
Racer_336 1/5/2021 1:44pm
1/5/2021 1:44pm Edited Date/Time 1/5/2021 1:45pm
Got mine today!! 13,336.07 OTD!





24
Wolfey
Profile picture for user Wolfey
Posts
260
Joined
12/7/2015
Location
IL US
Wolfey 1/5/2021 4:45pm
1/5/2021 4:45pm
Racer_336 wrote:
Got mine today!! 13,336.07 OTD! [img]https://p.vitalmx.com/photos/forums/2021/01/05/470319/s1200_DF3EDDB4_650F_4AA0_AD46_37DD41F48B99.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/05/470321/s1200_893C0485_2B4E_4419_AF90_564CFD7D92B2.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/05/470320/s1200_321C12A1_2295_497D_AEB1_0C67322B1289.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/05/470322/s1200_DA90E481_1A9E_4CA6_BA1D_E5AA48197E7B.jpg[/img]
Got mine today!! 13,336.07 OTD!





So sweet!!! Congratulations bud.
1

Pit Row

See All »
plano67
Profile picture for user plano67
Posts
188
Joined
11/15/2019
Location
Simi Valley, CA US
plano67 1/6/2021 9:41pm
1/6/2021 9:41pm
Racer_336 wrote:
Got mine today!! 13,336.07 OTD! [img]https://p.vitalmx.com/photos/forums/2021/01/05/470319/s1200_DF3EDDB4_650F_4AA0_AD46_37DD41F48B99.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/05/470321/s1200_893C0485_2B4E_4419_AF90_564CFD7D92B2.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/05/470320/s1200_321C12A1_2295_497D_AEB1_0C67322B1289.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/05/470322/s1200_DA90E481_1A9E_4CA6_BA1D_E5AA48197E7B.jpg[/img]
Got mine today!! 13,336.07 OTD!





That’s a great price!
1
Honda820
Profile picture for user Honda820
Posts
18
Joined
10/6/2020
Location
Wilkesboro, NC US
Honda820 1/8/2021 9:41am
1/8/2021 9:41am
mxrider118 wrote:
Hey Wolfey! I cant seem to find these anywhere, could you share with you got it please
Wolfey wrote:
Yep . www.dominuscorp.com
Took about a week or so to get them.
mxrider118 wrote:
Does the stock WE filter filter this powerflow kit. stupid question I know
Good question! No, it does not fit the power flow cage
burn1986
Profile picture for user burn1986
Posts
9786
Joined
4/16/2010
Location
bossier city, LA US
Fantasy
3311th
burn1986 1/8/2021 11:22am
1/8/2021 11:22am
Racer_336 wrote:
Got mine today!! 13,336.07 OTD! [img]https://p.vitalmx.com/photos/forums/2021/01/05/470319/s1200_DF3EDDB4_650F_4AA0_AD46_37DD41F48B99.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/05/470321/s1200_893C0485_2B4E_4419_AF90_564CFD7D92B2.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/05/470320/s1200_321C12A1_2295_497D_AEB1_0C67322B1289.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/05/470322/s1200_DA90E481_1A9E_4CA6_BA1D_E5AA48197E7B.jpg[/img]
Got mine today!! 13,336.07 OTD!





plano67 wrote:
That’s a great price!
13K?! Blink
2
3
mxengineer1
Profile picture for user mxengineer1
Posts
65
Joined
9/17/2015
Location
Dublin, OH US
mxengineer1 1/8/2021 2:39pm
1/8/2021 2:39pm
Quick walk around, start up, and putt around on my new 2021 Honda CRF450R Works Edition. Going to be a while before I can ride it at a track as it is too muddy and cold (for me!) in Ohio now. Have putted it around a field and initial impressions are smooth power (KTM like with more excitement), Yoshimura exhaust reasonably quiet, thin ergos with great bar/seat/footpeg relationship, hydraulic clutch feels smooth and though pull effort is reduced still higher than KTM effort, seat is thin and firm. I can notice a little initial slow/rich feeling response to quick throttle inputs at low rpm - not a big deal but I would guess this is the issue some are noticing.

The bike looks amazing in person! Can't wait for a real ride on it hopefully soon!

https://www.youtube.com/watch?v=y3zZ23qFqd0&lc=UgwoIb5QHbXMsvdy2n94AaAB…



6
Meister
Profile picture for user Meister
Posts
2553
Joined
3/21/2013
Location
Canton, OH US
Meister 1/8/2021 3:56pm
1/8/2021 3:56pm
TDR Motorsports in Ohio has started to develop maps for our bikes. Tim Is very well known in the pro ATV world as
a proven Honda guru. My WE is in his hands. Will report back next week.
mirramaxx
Profile picture for user mirramaxx
Posts
887
Joined
12/15/2011
Location
NE US
mirramaxx 1/8/2021 4:28pm
1/8/2021 4:28pm
My Local Honda dealer has one for 12,800 I was talked out of getting it... for now.
plano67
Profile picture for user plano67
Posts
188
Joined
11/15/2019
Location
Simi Valley, CA US
plano67 1/8/2021 5:03pm
1/8/2021 5:03pm Edited Date/Time 1/8/2021 5:04pm
mirramaxx wrote:
My Local Honda dealer has one for 12,800 I was talked out of getting it... for now.
What state is the bike at if you don’t mind?
Meister
Profile picture for user Meister
Posts
2553
Joined
3/21/2013
Location
Canton, OH US
Meister 1/8/2021 5:38pm
1/8/2021 5:38pm
Five star in bedford pa has 1 R left!
mirramaxx
Profile picture for user mirramaxx
Posts
887
Joined
12/15/2011
Location
NE US
mirramaxx 1/8/2021 8:45pm
1/8/2021 8:45pm Edited Date/Time 1/8/2021 8:51pm
mirramaxx wrote:
My Local Honda dealer has one for 12,800 I was talked out of getting it... for now.
plano67 wrote:
What state is the bike at if you don’t mind?
Don't mind at all ! It's in Roca,Nebraska.https://www.facebook.com/rodspowersportsne/photos/a.10152112239459870/10158630672559870

https://www.rodspowersports.com/inventory/2021-honda-crf450rwem-re-2021-roca-ne-68430-10815745i

The best guy to talk with out there is Phill !
1
mattbmx63
Profile picture for user mattbmx63
Posts
573
Joined
7/25/2008
Location
Wallingford, CT US
mattbmx63 1/9/2021 7:39am
1/9/2021 7:39am
Just got mine! Looks so good I don’t even want to ride it. $12,600 otd
6
plano67
Profile picture for user plano67
Posts
188
Joined
11/15/2019
Location
Simi Valley, CA US
plano67 1/9/2021 12:49pm
1/9/2021 12:49pm
mattbmx63 wrote:
Just got mine! Looks so good I don’t even want to ride it. $12,600 otd
What state? Cali wants almost $15k. 😂😂😂
2

Post a reply to: Crf 450rwe!!!!