Posts: 7
Joined: 11/16/2018
Location: NZL
Hi guys,
I have recently had my chain snap and go through the case protector and has broken the case.
The bike is 2007 and I am struggling to source a second hand or cheaper cases that's under $1000, any recommendations of who or where to look?
Cheers
Posts: 1584
Joined: 10/4/2018
Location: AUS
Depending on how bad it is, if you have a reputable welder and machinist near you, it can be fixed. Usually not pretty but an experienced guy can do crankcase repairs as long as the damage is not too near the crank main bearing housings.
Posts: 442
Joined: 12/12/2016
Location: CO, USA
Posts: 2229
Joined: 8/5/2015
Location: POL
I should have a set of '08 cases lying around. Hit me up and I'll check it during the weekend.
Posts: 7
Joined: 11/16/2018
Location: NZL
Posts: 6939
Joined: 11/16/2011
Location: Menifee, CA USA
A brand-new crank case set retails for $609.20. Part #11301-37860.
Probably a backordered part, but it's still available in the Suzuki EPC.
Braaapin' aint easy.
Posts: 1907
Joined: 9/3/2011
Location: Anderson, CA USA
Just buy a used bike steal the parts u want and recoup the rest by selling the stuff u don't want
when in doubt, pin it out
Posts: 1418
Joined: 3/28/2015
Location: Satan's Hollow, OK USA
Posts: 167
Joined: 9/28/2015
Location: San Francisco, CA USA
Posts: 226
Joined: 8/7/2013
Location: NLD
captain.olives wrote:Ebay has a used set right now for a buy it now price of $149.
These have the same problem!
The left case has been repaired by the clutch lever arm ,see picture
Posts: 4290
Joined: 8/26/2006
Location: FL, USA
Edited Date/Time:
Either toss the case saver, or round the leading edge off to try and deflect the chain binding up should it derail.
Have seen that happen more than once using those "case breakers". Once where a rock jammed up between the saver and chain, broke the cases, chain still on.
Posts: 2013
Joined: 9/14/2006
Location: NJ, USA
Posts: 7
Joined: 11/16/2018
Location: NZL
Posts: 2013
Joined: 9/14/2006
Location: NJ, USA
Have you given Millenium Technologies a call? Maybe show them the pics and tell them what peieces you have left over. I see they do head and cylinder repair, maybe they can help or point you to someone who can.
Posts: 7
Joined: 11/16/2018
Location: NZL
