Posts: 497
Joined: 6/17/2016
Location: GBR
Wanting to replace my bikes discs, currently on BRAKING ones (270mm front) but damn they're expensive to replace. Any suggestions on a different brand that's a bit less painful on the wallet without sacrificing too much quality? Thanks, casey
I used to think I was indecisive, but now I'm not too sure.
Posts: 525
Joined: 8/15/2006
Location: Here or there..., FRA
I'm a bit biased but you should have a look at Moto-Master:
https://www.moto-master.com/product-category/offroad-brake-products/brake-rotors-offroad/
Factory KTM US & Europe, Factory Wilvo Yamaha, Factory Husqvarna.... many more use them.
They also have a Factory Rear Disc that is 10% thicker than a normal rotors, which is great if you're a brake dragger.
Posts: 497
Joined: 6/17/2016
Location: GBR
mpy wrote:
I'm a bit biased but you should have a look at Moto-Master:
https://www.moto-master.com/product-category/offroad-brake-products/brake-rotors-offroad/
Factory KTM US & Europe, Factory Wilvo Yamaha, Factory Husqvarna.... many more use them.
They also have a Factory Rear Disc that is 10% thicker than a normal rotors, which is great if you're a brake dragger.
Thanks mate, I was actually just looking at a set of the flame style ones on 24mx! I'll keep looking but I'll keep those in mind. Thanks!
I used to think I was indecisive, but now I'm not too sure.
Posts: 434
Joined: 12/8/2015
Location: Winter Park, FL USA
Edited Date/Time:
The Galfer SKW @ $135 and Tusk oversized rotor @ $120 are both great options. Rockstar Husky uses the Galfer SKW.
Galfer SKW:
https://www.rockymountainatvmc.com/p/1896/47052/Galfer-SKW-Oversize-Rotor-Kit?v=9859
Tusk:
https://www.rockymountainatvmc.com/p/1896/35148/Tusk-Oversized-Floating-Typhoon-Brake-Rotor-Kit-Front?v=9859
Posts: 9292
Joined: 1/4/2014
Location: FIN
Moto-Master is my go to brand. Their normal sized Flame discs are around 100€ each, i just bought a set.
Posts: 2227
Joined: 8/5/2015
Location: POL
Gandorlf wrote:
Wanting to replace my bikes discs, currently on BRAKING ones (270mm front) but damn they're expensive to replace. Any suggestions on a different brand that's a bit less painful on the wallet without sacrificing too much quality? Thanks, casey
What bike? I might be able to hook you up.
Posts: 821
Joined: 3/23/2017
Location: DEU
I can recommand Moto-Master. My 270 Moto-Master oversize Kit is beautifully made and works great on my yz250f (with stock brake pads). I had a BRAKING set before and it was heavier, not as well made and more expensive..
Posts: 5615
Joined: 1/31/2018
Location: Mansfield, OH USA
Posts: 2227
Joined: 8/5/2015
Location: POL
#434 wrote:
I can recommand Moto-Master. My 270 Moto-Master oversize Kit is beautifully made and works great on my yz250f (with stock brake pads). I had a BRAKING set before and it was heavier, not as well made and more expensive..
Moto master discs are outstanding. I had nothing but good luck with their products.
Posts: 1015
Joined: 9/21/2015
Location: NLD
Posts: 9211
Joined: 7/6/2015
Location: So Cal, CA USA
kb228 wrote:
I got an oversized tusk rotor on both of my bikes. They work great.
This. Both my dad and I run the tusk and they work great
2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F
80% of the time it works every time
IG @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals
Posts: 497
Joined: 6/17/2016
Location: GBR
Gandorlf wrote:
Wanting to replace my bikes discs, currently on BRAKING ones (270mm front) but damn they're expensive to replace. Any suggestions on a different brand that's a bit less painful on the wallet without sacrificing too much quality? Thanks, casey
Turbojez wrote:
What bike? I might be able to hook you up.
2015 KX250F! 
I used to think I was indecisive, but now I'm not too sure.
Posts: 497
Joined: 6/17/2016
Location: GBR
wideopen198 wrote:
I also run a 270 Motomaster flame floating disc on the front. I like it a lot.
Looks like it's either Moto Master or Tusk!
I used to think I was indecisive, but now I'm not too sure.
Posts: 497
Joined: 6/17/2016
Location: GBR
mxbrian15 wrote:
The Galfer SKW @ $135 and Tusk oversized rotor @ $120 are both great options. Rockstar Husky uses the Galfer SKW.
Galfer SKW:
https://www.rockymountainatvmc.com/p/1896/47052/Galfer-SKW-Oversize-Rotor-Kit?v=9859
Tusk:
https://www.rockymountainatvmc.com/p/1896/35148/Tusk-Oversized-Floating-Typhoon-Brake-Rotor-Kit-Front?v=9859
I'll check these out thanks
I used to think I was indecisive, but now I'm not too sure.
