Attention New gen Yamaha owners

yamahaha131
Profile picture for user yamahaha131
Posts
545
Joined
4/7/2010
Location
Newark, OH US
yamahaha131
Edited Date/Time 4/9/2021 6:08pm
Check your wifi plug, make sure it’s router around the subframe. I got this info straight from Travis Preston after my wifi stopped working. Dealer installed it wrong. I found another thread with same symptoms, same exact wire.



7
|
Wintyfresh
Profile picture for user Wintyfresh
Posts
98
Joined
5/27/2015
Location
Ramona, CA US
Wintyfresh 4/6/2021 6:52pm
4/6/2021 6:52pm
So is it supposed to be in front of the subframe or behind it?
yamahaha131
Profile picture for user yamahaha131
Posts
545
Joined
4/7/2010
Location
Newark, OH US
yamahaha131 4/6/2021 8:02pm
4/6/2021 8:02pm
Wintyfresh wrote:
So is it supposed to be in front of the subframe or behind it?
I would call it outside of subframe.
1
Moto88
Profile picture for user Moto88
Posts
328
Joined
12/6/2015
Location
TX US
Moto88 4/6/2021 9:06pm
4/6/2021 9:06pm Edited Date/Time 4/7/2021 8:50am
Wintyfresh wrote:
So is it supposed to be in front of the subframe or behind it?
yamahaha131 wrote:
I would call it outside of subframe.
In your pic it looks like the wires are fixed and now inside of the subframe. ?? so is that the correct way? ————Edit—-I looked a little closer and see wire is still broke. So this pic is wrong routing. Should go around outside of frame I assume.
zeromarine
Profile picture for user zeromarine
Posts
192
Joined
7/12/2020
Location
Somewhere, AB CA
zeromarine 4/6/2021 9:47pm
4/6/2021 9:47pm
I’ll have to check mine it’s a 2021 are they installed correctly ?

The Shop

See All »
yamahaha131
Profile picture for user yamahaha131
Posts
545
Joined
4/7/2010
Location
Newark, OH US
yamahaha131 4/7/2021 4:10am
4/7/2021 4:10am
If you look closely my wire is broken. It was routed behind or inside the subframe, which per TP is incorrect. It should be routed out around the subframe. Taking my connector to a buddy to see if he can fix it before I order a new one.
1
JBecker 72
Profile picture for user JBecker 72
Posts
1738
Joined
3/25/2014
Location
VA US
JBecker 72 4/7/2021 4:19am
4/7/2021 4:19am
yamahaha131 wrote:
If you look closely my wire is broken. It was routed behind or inside the subframe, which per TP is incorrect. It should be routed out...
If you look closely my wire is broken. It was routed behind or inside the subframe, which per TP is incorrect. It should be routed out around the subframe. Taking my connector to a buddy to see if he can fix it before I order a new one.
You should be able to pop the wire out of the connector with a small pick and then that wire could be soldered back together nicely.

I will have to check the routing on mine.
headlightracer 4/7/2021 5:17am
4/7/2021 5:17am
I got my '21 in a box and the owners manual wants to route it behind the subframe. Tried it and didn't like it. Way too tight an pressure on the cable. Routed it in front of the subframe (aka the Preston way). Way better.
5
yamahaha131
Profile picture for user yamahaha131
Posts
545
Joined
4/7/2010
Location
Newark, OH US
yamahaha131 4/7/2021 2:38pm
4/7/2021 2:38pm
Thisusernameisavailable wrote:
I bet 'the dealer' had nothing to do with it.
Considering they put a 14-17 front number plate on my 18 causing my number background not to fit, I don’t doubt the dealer had everything to do with it. Poor guy at factory effex sorted me out after I wrote a shitty email about the fit.

Side note, local auto electric shop owner is a friend, hooked me right up. Not like the bike has a ton of hours either.
1
tobz
Profile picture for user tobz
Posts
3900
Joined
3/5/2007
Location
Adelaide AU
tobz 4/7/2021 6:34pm
4/7/2021 6:34pm
Thisusernameisavailable wrote:
I bet 'the dealer' had nothing to do with it.
yamahaha131 wrote:
Considering they put a 14-17 front number plate on my 18 causing my number background not to fit, I don’t doubt the dealer had everything to...
Considering they put a 14-17 front number plate on my 18 causing my number background not to fit, I don’t doubt the dealer had everything to do with it. Poor guy at factory effex sorted me out after I wrote a shitty email about the fit.

Side note, local auto electric shop owner is a friend, hooked me right up. Not like the bike has a ton of hours either.
You don't use the app to clear your service intervals then?
SEEMEFIRST
Profile picture for user SEEMEFIRST
Posts
10976
Joined
8/21/2006
Location
Arlington, TX US
SEEMEFIRST 4/7/2021 7:17pm
4/7/2021 7:17pm
I don't have a motocicle with wifi, but I work on machines daily, and wiring configurations is a deal.

Check everything because tension and friction are both bad.
Titan1
Profile picture for user Titan1
Posts
8616
Joined
2/3/2010
Location
Lehi, UT US
Titan1 4/7/2021 7:32pm
4/7/2021 7:32pm
Thisusernameisavailable wrote:
I bet 'the dealer' had nothing to do with it.
yamahaha131 wrote:
Considering they put a 14-17 front number plate on my 18 causing my number background not to fit, I don’t doubt the dealer had everything to...
Considering they put a 14-17 front number plate on my 18 causing my number background not to fit, I don’t doubt the dealer had everything to do with it. Poor guy at factory effex sorted me out after I wrote a shitty email about the fit.

Side note, local auto electric shop owner is a friend, hooked me right up. Not like the bike has a ton of hours either.
You mean you didn’t replace your piston at 12.5 hours?
3
Leeham
Profile picture for user Leeham
Posts
1087
Joined
10/29/2018
Location
Rochester, WA US
Fantasy
3084th
Leeham 4/7/2021 7:45pm
4/7/2021 7:45pm
Hahaha im sure you would need to change the piston at 12.5 hours when you run the oil for 7.5 hours lmfao wtf
I change that shit every ride because I dont believe .75-.8 Liters of oil is enough to last that long. My Honda went much longer on oil before it even changed color
1
Titan1
Profile picture for user Titan1
Posts
8616
Joined
2/3/2010
Location
Lehi, UT US
Titan1 4/7/2021 7:48pm
4/7/2021 7:48pm
Leeham wrote:
Hahaha im sure you would need to change the piston at 12.5 hours when you run the oil for 7.5 hours lmfao wtf I change that...
Hahaha im sure you would need to change the piston at 12.5 hours when you run the oil for 7.5 hours lmfao wtf
I change that shit every ride because I dont believe .75-.8 Liters of oil is enough to last that long. My Honda went much longer on oil before it even changed color
That’s crazy...the oil filter and the piston need to be replaced at the same intervals...lol
Timo
Profile picture for user Timo
Posts
779
Joined
1/9/2021
Location
Wichita, KS US
Timo 4/7/2021 8:47pm
4/7/2021 8:47pm
Leeham wrote:
Hahaha im sure you would need to change the piston at 12.5 hours when you run the oil for 7.5 hours lmfao wtf I change that...
Hahaha im sure you would need to change the piston at 12.5 hours when you run the oil for 7.5 hours lmfao wtf
I change that shit every ride because I dont believe .75-.8 Liters of oil is enough to last that long. My Honda went much longer on oil before it even changed color
Cause oil can definitely be judged by it's color...
Titan1
Profile picture for user Titan1
Posts
8616
Joined
2/3/2010
Location
Lehi, UT US
Titan1 4/7/2021 9:00pm
4/7/2021 9:00pm
Leeham wrote:
Hahaha im sure you would need to change the piston at 12.5 hours when you run the oil for 7.5 hours lmfao wtf I change that...
Hahaha im sure you would need to change the piston at 12.5 hours when you run the oil for 7.5 hours lmfao wtf
I change that shit every ride because I dont believe .75-.8 Liters of oil is enough to last that long. My Honda went much longer on oil before it even changed color
I will say, I changed the oil on by 19 YZ450FX at 7.5 hours...and never had any issues...and I plan to do the same on my 21...
Thisusernameisavailable 4/8/2021 4:30am
4/8/2021 4:30am
Thisusernameisavailable wrote:
I bet 'the dealer' had nothing to do with it.
yamahaha131 wrote:
Considering they put a 14-17 front number plate on my 18 causing my number background not to fit, I don’t doubt the dealer had everything to...
Considering they put a 14-17 front number plate on my 18 causing my number background not to fit, I don’t doubt the dealer had everything to do with it. Poor guy at factory effex sorted me out after I wrote a shitty email about the fit.

Side note, local auto electric shop owner is a friend, hooked me right up. Not like the bike has a ton of hours either.
Have you’ve ever built a new bike from the crate?
The dealers are messing around with wiring looms and plugs I can assure you.
Front wheel
Front fender
Handlebars & front plate.
Fill with oil... GO!

So yeah, your dealer may well have picked up the wrong front plate, but they didn’t fit your wiring loom.

Weirdly, my friend has just bought a brand new 2020 YZ250 two stroke which appears to have the incorrect front plate fitted.
1

Pit Row

See All »
Sachmo831
Profile picture for user Sachmo831
Posts
229
Joined
10/7/2015
Location
South Bend, IN US
Sachmo831 4/8/2021 4:47am
4/8/2021 4:47am
Thisusernameisavailable wrote:
Have you’ve ever built a new bike from the crate? The dealers are messing around with wiring looms and plugs I can assure you. Front wheel...
Have you’ve ever built a new bike from the crate?
The dealers are messing around with wiring looms and plugs I can assure you.
Front wheel
Front fender
Handlebars & front plate.
Fill with oil... GO!

So yeah, your dealer may well have picked up the wrong front plate, but they didn’t fit your wiring loom.

Weirdly, my friend has just bought a brand new 2020 YZ250 two stroke which appears to have the incorrect front plate fitted.
The ccu is dealer installed...
2
Vet57
Profile picture for user Vet57
Posts
1785
Joined
12/13/2010
Location
White House, DC US
Vet57 4/9/2021 4:15am
4/9/2021 4:15am Edited Date/Time 4/9/2021 4:16am
The last two 250Fs (19/21) I purchased both CCUs were not installed which I can see being a problem if you didn't know what you were doing. Gave me a box and said thanks. Lol
murph783
Profile picture for user murph783
Posts
1361
Joined
3/2/2011
Location
CT US
murph783 4/9/2021 5:09am
4/9/2021 5:09am
Thisusernameisavailable wrote:
Have you’ve ever built a new bike from the crate? The dealers are messing around with wiring looms and plugs I can assure you. Front wheel...
Have you’ve ever built a new bike from the crate?
The dealers are messing around with wiring looms and plugs I can assure you.
Front wheel
Front fender
Handlebars & front plate.
Fill with oil... GO!

So yeah, your dealer may well have picked up the wrong front plate, but they didn’t fit your wiring loom.

Weirdly, my friend has just bought a brand new 2020 YZ250 two stroke which appears to have the incorrect front plate fitted.
Sachmo831 wrote:
The ccu is dealer installed...
Yep. Built a couple two tree of these in my day, you’re definitely plugging that little sucker in when it comes off the crate. I will say though, almost certainly the guy building it can’t/didn’t read the wiring diagram and just slapped it in
sandtrack315
Profile picture for user sandtrack315
Posts
2550
Joined
7/19/2013
Location
Philadelphia, PA US
sandtrack315 4/9/2021 6:01am
4/9/2021 6:01am
Vet57 wrote:
The last two 250Fs (19/21) I purchased both CCUs were not installed which I can see being a problem if you didn't know what you were...
The last two 250Fs (19/21) I purchased both CCUs were not installed which I can see being a problem if you didn't know what you were doing. Gave me a box and said thanks. Lol
Same. Easy enough, but damn.
SEEMEFIRST
Profile picture for user SEEMEFIRST
Posts
10976
Joined
8/21/2006
Location
Arlington, TX US
SEEMEFIRST 4/9/2021 4:04pm
4/9/2021 4:04pm
headlightracer wrote:
The dealer did nothing wrong. The owners manual is pretty clear at this point. 🤷🏻‍♂️ [img]https://p.vitalmx.com/photos/forums/2021/04/09/487012/s1200_20210409_152355.jpg[/img]
The dealer did nothing wrong. The owners manual is pretty clear at this point. 🤷🏻‍♂️

If everything is where it should be, and wires are the correct length, that certainly looks like a cleaner, safer installation.
yamahaha131
Profile picture for user yamahaha131
Posts
545
Joined
4/7/2010
Location
Newark, OH US
yamahaha131 4/9/2021 6:08pm
4/9/2021 6:08pm
headlightracer wrote:
The dealer did nothing wrong. The owners manual is pretty clear at this point. 🤷🏻‍♂️ [img]https://p.vitalmx.com/photos/forums/2021/04/09/487012/s1200_20210409_152355.jpg[/img]
The dealer did nothing wrong. The owners manual is pretty clear at this point. 🤷🏻‍♂️

I’m just going off what the factory test rider pointed me to without seeing my bike. Can’t be coincidence another thread was made with the same exact issue, same exact wire. So it’s an issue regardless if the manual is correct or not. I’m not on here to bash dealers, hopefully just saving someone the issue I had.
2

Post a reply to: Attention New gen Yamaha owners