Posts
39
Joined
2/21/2021
Location
IN
US
Fantasy
4334th
Edited Date/Time
2/26/2021 6:52am
I've been looking at modifications to the OEM cover from Yamaha, and I think I'm going the route that Monster Energy/Star Racing did - cutting a hole in the front of the Cycra "tall" version of the air intake cover. However, I can't seem to find that part # from Cycra. Anyone know where to get one? Rocky Mountain ATV/Motosport/Etc. don't seem to have them. They have the previous generation version, with the small holes at the front of the air intake, but not the "tall" version that the Star Racing guys cut a hole out in the front. I also can't find it on Cycra's website, and they don't even list the 2021 YZ250F as having an air intake cover available. Anyobody have one and would care to share where they got it from?
https://www.motosport.com/cycra-air-box-cover
This is what the Star team runs.
Slater Skins makes 1 that’s GREAT & inexpensive 👍👍 When coupled with the Twin Air Race Filter Set-Up, High Volume, you’ll feel the difference
The Shop
This is the Cycra cover. It gives more air volume around the filter. It is definitely taller than stock, but not sticking way up or anything.
I only started this thread because I wanted the specific part number to make sure that I got the correct Cycra cover. Many of the retail websites show the wrong picture.
For what it's worth I am going with the cover that star racing Yamaha uses, the Cycra OEM replacement. I will be cutting a hole just like they do, but I may end up putting a piece of screen behind it to keep out large debris. From what I can gather in these forumn posts it is taller than the factory cover allowing more volume of air.
MX317 gave me this Part Number: 1CYC-1785-62
https://www.ebay.com/itm/CYCRA-1CYC-1785-62-AIRBOX-CVR-YZF-BLUE/274361919895?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111314%26meid%3Dda66187e103a43ed9f51a3bbb997353b%26pid%3D101195%26rk%3D2%26rkt%3D12%26mehot%3Dpf%26sd%3D324482839970%26itm%3D274361919895%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv9PairwiseUnbiasedWeb%26brand%3DCycra&_trksid=p2047675.c101195.m1851
The Slater Skins looks very homemade in some of the pictures, the rough edges and wonky vents would drive me bonkers.
Pit Row
All i can say is a GET ECU, Nihilo airbox, DT-1 filter cage and FMF full exhaust is a really nice combo which give a really strong motor down low, mid and up top !
Really love the bike so far, it is my first YZF, been on KTM/Husqvarna since 2016.
Here is the gain i got:
Post a reply to: 2021 Yamaha YZ250F Cycra "Tall" Air Intake Cover