2018 crf450r (well nut problem, CANT CHANGE OIL) HONDA/ ATTENTION: BILL/CARLOS

Related:
Create New Tag

8/1/2017 6:03 PM
Edited Date/Time: 8/1/2017 6:04 PM

I just got a 2018 crf450 2 weeks ago. I rode the bike one time. I tried to change the oil and the well nut holding on the skid plate is spinning and I am not able to take the skid plate off. Therefore, I can not change my oil. If I try to grind the head with a small grinder the skid plate will melt and the rest of the bolt will still be stuck in the nut. I could remove the bolt after I grind the head but then the well nut will still spin if I put a new bolt in. Which means the well nut should be grinded off and will need a new one, therefore, half the well nut will be stuck in the frame and the bike is 2 weeks old... HONDA email me, I spent $9,000 on this bike! ATTENTION: Bill/Carlos

|

8/1/2017 6:04 PM
Edited Date/Time: 8/1/2017 6:05 PM

Maybe reach out to your dealer? You will have 100% more success that way.

(Wait...is this a joke thread?)

|

8/1/2017 6:15 PM

|

8/1/2017 6:17 PM

Hope that helps ✌️ didn't know they are using nut serts on these newer bikes.

|