2013 Husqvarna TC250 PARTS!?!

Kyriazis298
Edited Date/Time 11/11/2014 10:01pm
Well, since they no longer make these bikes the prices are way low and i got an offer for one that i just cant pass up.

Is there any websites that you can order parts from for these bikes? if so please post. thanks.

Really want to buy this bike.
|
Kyriazis298 11/8/2014 8:16pm
11/8/2014 8:16pm
Katoomey wrote:
nope. none.
lol Where can ya get things like clutches, piston etc.. rockymountain seems to stock normal stuff like chains sprockets brake pads and air filters but no bearings and stuff like pistons and cranks

The Shop

See All »
wpark89
Profile picture for user wpark89
Posts
1116
Joined
12/9/2009
Location
Mattawa, WA US
wpark89 11/8/2014 10:05pm
11/8/2014 10:05pm
Halls in Illinois like the smart dudes ahead of me said.....or also Bills MC Plus in Salem Oregon is the place to go.

daveoevo
Profile picture for user daveoevo
Posts
194
Joined
5/1/2011
Location
GB
daveoevo 11/8/2014 11:18pm
11/8/2014 11:18pm
If an offer is too good to be true then it usually is.
They are cheap because there not very good bikes with a very slow engine.
Kyriazis298 11/9/2014 7:45am
11/9/2014 7:45am
daveoevo wrote:
If an offer is too good to be true then it usually is. They are cheap because there not very good bikes with a very slow...
If an offer is too good to be true then it usually is.
They are cheap because there not very good bikes with a very slow engine.
Thats so far from being true. On the dyno it pumped more HP than the 2013 YZF and i rode one on a demo day, they are super smooth that cut corners sharper than most bikes ive ridden.
ab5772
Profile picture for user ab5772
Posts
672
Joined
4/1/2008
Location
SLC, UT US
ab5772 11/9/2014 8:05am
11/9/2014 8:05am Edited Date/Time 11/9/2014 8:06am
Munn?
harrowguy 11/9/2014 11:20am
11/9/2014 11:20am
I saw some going for $4500 in Ottawa
I was too late though.
Just keep in mind it's gonna be really hard to sell.
However if I could find a 12 or 13 CR125/144 I would grab it up; but I haven't been able one here or in Michigan.
Kyriazis298 11/9/2014 11:28am
11/9/2014 11:28am
harrowguy wrote:
I saw some going for $4500 in Ottawa I was too late though. Just keep in mind it's gonna be really hard to sell. However if...
I saw some going for $4500 in Ottawa
I was too late though.
Just keep in mind it's gonna be really hard to sell.
However if I could find a 12 or 13 CR125/144 I would grab it up; but I haven't been able one here or in Michigan.
Quad experts in ottawa sold out a long time ago now.

But there good bikes i like em. And yeah i would buy a cr144 but im building my 04 yz125 up for winter project
OriolMassot
Profile picture for user OriolMassot
Posts
516
Joined
12/27/2010
Location
We speak Catalan AD
OriolMassot 11/9/2014 12:00pm
11/9/2014 12:00pm
Shouldn't KTM have to provide parts for those bikes as well?
mxfiend
Profile picture for user mxfiend
Posts
311
Joined
1/30/2013
Location
Riverside, CA US
mxfiend 11/9/2014 1:55pm
11/9/2014 1:55pm
call malcolm smith motorsports we deal with husky all the time parts are usually 5 business days out for most engine components
Kyriazis298 11/9/2014 1:58pm
11/9/2014 1:58pm
mxfiend wrote:
call malcolm smith motorsports we deal with husky all the time parts are usually 5 business days out for most engine components
Ive got a question, could you guys order a part to come straight to my house. i live in canada

Also how much do things like cranks, piston, valves etc cost for the 2013 tc250s

thanks
X-RACER
Profile picture for user X-RACER
Posts
157
Joined
9/30/2012
Location
Spring Hill, FL US
X-RACER 11/9/2014 2:13pm
11/9/2014 2:13pm
Tons of parts out there.

mxfiend
Profile picture for user mxfiend
Posts
311
Joined
1/30/2013
Location
Riverside, CA US
mxfiend 11/9/2014 2:52pm
11/9/2014 2:52pm
Kyriazis298 wrote:
Ive got a question, could you guys order a part to come straight to my house. i live in canada Also how much do things like...
Ive got a question, could you guys order a part to come straight to my house. i live in canada

Also how much do things like cranks, piston, valves etc cost for the 2013 tc250s

thanks
they wont drop ship... so it would come to us first then ship to you. it all varies but ill check at work tomorrow... some parts are crazy expensive and some are crazy cheap its odd...
Kyriazis298 11/9/2014 3:17pm
11/9/2014 3:17pm
Kyriazis298 wrote:
Ive got a question, could you guys order a part to come straight to my house. i live in canada Also how much do things like...
Ive got a question, could you guys order a part to come straight to my house. i live in canada

Also how much do things like cranks, piston, valves etc cost for the 2013 tc250s

thanks
mxfiend wrote:
they wont drop ship... so it would come to us first then ship to you. it all varies but ill check at work tomorrow... some parts...
they wont drop ship... so it would come to us first then ship to you. it all varies but ill check at work tomorrow... some parts are crazy expensive and some are crazy cheap its odd...
Makes sence and thanks! let me know
Kyriazis298 11/9/2014 3:18pm
11/9/2014 3:18pm
X-RACER wrote:
Tons of parts out there.[img]https://p.vitalmx.com/photos/forums/2014/11/09/70095/s1200_2014_019.jpg[/img]
Tons of parts out there.

How reliable is ur bike?

Also have u ever had issues finding any parts

Pit Row

See All »
bigborefan
Profile picture for user bigborefan
Posts
1472
Joined
3/8/2008
Location
Urbana, IL US
bigborefan 11/9/2014 3:26pm
11/9/2014 3:26pm
I rode a couple of the Dual Sport/Enduro models a few years back, 511 and 450 I think. They weren't bad. I could live with one, especially for the price they were closing them out at.
swedishfishmx
Profile picture for user swedishfishmx
Posts
1522
Joined
3/5/2010
Location
Shawnee, KS US
Fantasy
3801st
swedishfishmx 11/9/2014 8:09pm
11/9/2014 8:09pm
daveoevo wrote:
If an offer is too good to be true then it usually is. They are cheap because there not very good bikes with a very slow...
If an offer is too good to be true then it usually is.
They are cheap because there not very good bikes with a very slow engine.
Not true at all. They are a good bike and the engine is a little underpowered but i wouldn't call it very slow.

woodsryder
Profile picture for user woodsryder
Posts
166
Joined
12/15/2012
Location
AS US
Fantasy
3295th
woodsryder 11/9/2014 10:04pm
11/9/2014 10:04pm
OriolMassot wrote:
Shouldn't KTM have to provide parts for those bikes as well?
KTM does have all the old back stock of Husky parts. We just ordered a kick start lever and a throttle cable for a mid 90's WR.
nytsmaC
Profile picture for user nytsmaC
Posts
5960
Joined
8/10/2009
Location
Frig Off CA
nytsmaC 11/9/2014 10:30pm
11/9/2014 10:30pm
OriolMassot wrote:
Shouldn't KTM have to provide parts for those bikes as well?
woodsryder wrote:
KTM does have all the old back stock of Husky parts. We just ordered a kick start lever and a throttle cable for a mid 90's...
KTM does have all the old back stock of Husky parts. We just ordered a kick start lever and a throttle cable for a mid 90's WR.
Let us know how long it takes to get it. I sold my Italian Husky because I had my doubts about future parts availability from KTM. I know they have to provide parts for a certain amount of years, but everything went on backorder almost instantly once KTM took control of it. Hopefully they hold up to their end of the bargain.

To the OP, what do you consider an offer that you couldn't refuse? They are great bikes, I liked mine, but resale as horrible, parts availability questionable and they are a bit on the quirky side. If you have a great Husky dealer nearby who stocks parts and has some experience with the pre-KTM bikes you'll have a big advantage there.
daveoevo
Profile picture for user daveoevo
Posts
194
Joined
5/1/2011
Location
GB
daveoevo 11/9/2014 11:10pm
11/9/2014 11:10pm
daveoevo wrote:
If an offer is too good to be true then it usually is. They are cheap because there not very good bikes with a very slow...
If an offer is too good to be true then it usually is.
They are cheap because there not very good bikes with a very slow engine.
swedishfishmx wrote:
Not true at all. They are a good bike and the engine is a little underpowered but i wouldn't call it very slow.

Just my experience of the bike but if it works for you that's great.
X-RACER
Profile picture for user X-RACER
Posts
157
Joined
9/30/2012
Location
Spring Hill, FL US
X-RACER 11/10/2014 7:37am
11/10/2014 7:37am


Its very reliable for a high performance 4-stroke.So far I only needed sprockets and a rad hose,tires,brakes and a couple of levers. Shipped same day. mine is a MY13 310R and is street legal. Its not so good on the street so I also bought a 650 Strada. For the price you cant beat these bikes.
nytsmaC
Profile picture for user nytsmaC
Posts
5960
Joined
8/10/2009
Location
Frig Off CA
nytsmaC 11/10/2014 9:23am
11/10/2014 9:23am
Mine was a 2010 CR125, which shared a lot of the same components as the 250 you're looking at. The stock suspension is good once you get it set up, KYB SSS forks and the Sachs shock is no slouch either. These bikes handle amazing, I'm surprised that they didn't get better magazine write-ups.

You need to run a heavier than normal shock spring on these bikes to get the chassis balanced, I'm guessing the linkage ratio is weird or something. I needed a 7.1kg shock spring to get my sag numbers correct, while a 6.4 works for me on most other bikes.

F150Motocrosser 11/10/2014 11:32am
11/10/2014 11:32am
X-RACER wrote:
[img]https://p.vitalmx.com/photos/forums/2014/11/10/70183/s1200_2014_011.jpg[/img] Its very reliable for a high performance 4-stroke.So far I only needed sprockets and a rad hose,tires,brakes and a couple of levers. Shipped same day...


Its very reliable for a high performance 4-stroke.So far I only needed sprockets and a rad hose,tires,brakes and a couple of levers. Shipped same day. mine is a MY13 310R and is street legal. Its not so good on the street so I also bought a 650 Strada. For the price you cant beat these bikes.
Good call man, my father did the exact same thing.. Was going to get one of the new 2014.5 (KTM) Huskys, but ended up getting a 2014 TXC310R and a 2013 Strada as a paclage deal for not much more than what the 2014.5 Husky would''ve cost. We absolutely love the Strada!
swedishfishmx
Profile picture for user swedishfishmx
Posts
1522
Joined
3/5/2010
Location
Shawnee, KS US
Fantasy
3801st
swedishfishmx 11/11/2014 4:04pm
11/11/2014 4:04pm
nytsmaC wrote:
Mine was a 2010 CR125, which shared a lot of the same components as the 250 you're looking at. The stock suspension is good once you...
Mine was a 2010 CR125, which shared a lot of the same components as the 250 you're looking at. The stock suspension is good once you get it set up, KYB SSS forks and the Sachs shock is no slouch either. These bikes handle amazing, I'm surprised that they didn't get better magazine write-ups.

You need to run a heavier than normal shock spring on these bikes to get the chassis balanced, I'm guessing the linkage ratio is weird or something. I needed a 7.1kg shock spring to get my sag numbers correct, while a 6.4 works for me on most other bikes.

That is one sweet TC! I wish the 250 2-stroke would have worked better, but the 125's worked well in that chassis.
Sandberm
Profile picture for user Sandberm
Posts
5847
Joined
3/27/2009
Location
Pasco, WA US
Sandberm 11/11/2014 6:50pm
11/11/2014 6:50pm
Kyriazis298 wrote:
Well, since they no longer make these bikes the prices are way low and i got an offer for one that i just cant pass up...
Well, since they no longer make these bikes the prices are way low and i got an offer for one that i just cant pass up.

Is there any websites that you can order parts from for these bikes? if so please post. thanks.

Really want to buy this bike.
Hold on here...

Arent you the same 11th GRADER who has an RMZ250 and a YZ125? And are getting a new 2015 bike soon? Now you may be buying a husky too?

Is your mom single btw?
Kyriazis298 11/11/2014 6:57pm
11/11/2014 6:57pm
Kyriazis298 wrote:
Well, since they no longer make these bikes the prices are way low and i got an offer for one that i just cant pass up...
Well, since they no longer make these bikes the prices are way low and i got an offer for one that i just cant pass up.

Is there any websites that you can order parts from for these bikes? if so please post. thanks.

Really want to buy this bike.
Sandberm wrote:
Hold on here... Arent you the same 11th GRADER who has an RMZ250 and a YZ125? And are getting a new 2015 bike soon? Now you...
Hold on here...

Arent you the same 11th GRADER who has an RMZ250 and a YZ125? And are getting a new 2015 bike soon? Now you may be buying a husky too?

Is your mom single btw?
same one and LOL

Post a reply to: 2013 Husqvarna TC250 PARTS!?!