Posts
434
Joined
6/12/2009
Location
IN
US
Hey all! I picked up a used '03 CR250 to play around with, and when I was greasing the linkage and swing arm bearings, I discovered the LH chain side of the pivot was all chewed up on the bottom side, and the bearing is exposed. The guy I bought if from put a brand new chain slider on it to cover up the jacked up swinger....but that is another story!! I am looking for a good used swing arm, and was researching the OEM part numbers, and discovered the '02-'03 CR125 and CR250 are the same swing arm, but then from '04-'07 the part numbers all start changing. Does anyone know if you can put the '04-'07 on the '02-'03? Anyone out there have a nice '02-'03 swing arm they would like to part with? HELP!
Edit-the one I bought was an '04 CR125 unit. Brake hose guide, linkage, and slider from my bike bolted right on.
The Shop
Post a reply to: 2003 Honda CR250R swing arm help