Posts
175
Joined
11/27/2018
Location
Dayton, OH
US
Edited Date/Time
11/27/2018 5:47am
47mm Showa spring forks serviced spring this year with skf seals, under 15 hours since serviced, stock valving, .48 spring rate.
20.5mm offset rg3 triple clamps with newer 13+ stem pressed in with clean bearing. This will fit 13-17 rmz450 13-18 rmz250, and possibly 08-12 / 10-12 450/250 not 100% sure. The front fender will need to have holes drilled due to the clamps being for the older gen
. Used on my 16 rmz450. Will sell items separately if requested.
$600 OBO Full setup
20.5mm offset rg3 triple clamps with newer 13+ stem pressed in with clean bearing. This will fit 13-17 rmz450 13-18 rmz250, and possibly 08-12 / 10-12 450/250 not 100% sure. The front fender will need to have holes drilled due to the clamps being for the older gen
. Used on my 16 rmz450. Will sell items separately if requested.$600 OBO Full setup
Post a reply to: rmz 450/250 47mm Showa spring fork + rg3 clamp spring conversion setup