YZ450F 14-17 Parts.

4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY US
4csHATER
Edited Date/Time 1/20/2018 3:24pm
I am going to be completely honest here. i have been indecisive about what i wanted to do with this bike. it was either i was going to fix and keep or just sell... and i needed the suspension off of it so i robbed the front forks and some other things. what i have left is what im going to list for shipment. Honestly all these parts are fresh and i will clean them according to purchase. i just havent had time to clean them yet but i will. these parts are off of a bike that the head gasket blew internally and guy didnt know and piston seized in cylinder. the bike had a about 36 hours on it when it seized. I picked it up to rebuild but decided to part ways with some items.

I clean with simple green and scotch brite so parts will be fresh when viewing upon arrival.

HERE IS THE FIRST EBAY LINK. https://www.ebay.com/itm/2015-YZ450F-bottom-end/112757767950?fits=Model…Tongue C4AAOSwlv9aXYFU&vxp=mtr

other parts are in my (sellers other listings)

I priced them super cheap. so if you need anything, hit me up.

either on here or by text 1-502-370-6169
|
4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY US
4csHATER 1/15/2018 9:52pm
1/15/2018 9:52pm



the above is 650.00+shipping. thats a f****ing steal. you cant even buy cases for that.
4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY US
4csHATER 1/16/2018 5:29am
1/16/2018 5:29am
I didn’t I bought it like that. I was gonna rebuild it, but have decided to part out the stuff I don’t need. And ol dude said it was low on oil ?!?

The Shop

See All »
racerx217
Profile picture for user racerx217
Posts
1200
Joined
10/10/2008
Location
MI US
racerx217 1/17/2018 3:55pm
1/17/2018 3:55pm
feedback on ebay doesn't look so hot, any explanations before i make a offer on something?
4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY US
4csHATER 1/17/2018 7:18pm
1/17/2018 7:18pm
it doesnt look good cause i sold alot outside of ebay and i got into a dispute with someone over a used mx 32 that they paid 22.00 for and i told them in the details its just a tire to throw on a bike if they didnt have one and they were upset about the quality of it when it arrived. it was a used mx32 SMH
mxrose3
Profile picture for user mxrose3
Posts
2171
Joined
8/17/2006
Location
Delmar, DE US
Fantasy
1116th
mxrose3 1/18/2018 7:54am
1/18/2018 7:54am
Do you have the head / valves, or did they get beat up when it locked up?
cdoggy81
Profile picture for user cdoggy81
Posts
1313
Joined
1/1/2018
Location
St. Petersburg, FL US
cdoggy81 1/18/2018 8:39am
1/18/2018 8:39am
Is the pic of the bike listed on ebay how it looked when you got it / how it looks now?
4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY US
4csHATER 1/18/2018 4:47pm
1/18/2018 4:47pm
Bike was listed on how it looked when I got it. @cdoggy81 and no head is sold.
4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY US
4csHATER 1/18/2018 8:52pm
1/18/2018 8:52pm
Bottom end including PERFECT CASES and a PERFECT TRANNY and PERFECT CLUTCH and all etc it’s just a little dirty. I mean it does need a crank yes but that’s like a 2 hr job. Wouldn’t you have rather me have been honest with you guys and let you see the condition it’s in before vapor honing or Vapor blasting like some of these eBay homos do..


I’ll give you a good example earlier this year I purchased a set of cases through eBay for a yz250f and dude said they had super low hours pulled from running bike fresh off show room floor. Come to find out he vapor blasted them after 80hrs use and they were hairline fractured but you couldn’t tell
Until you got it hot and the bearings would
Spin in he race and make a high pitch howling noise.
4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY US
4csHATER 1/18/2018 8:54pm
1/18/2018 8:54pm
Any way bottom end price has been dropped to lowest I’ll go... 400$ I mean if someone can’t pay that for a set of perfect cases , tranny , clutch , neutral sensor, clutch cover, water pump, counterbalancer, oil filter, crank core, Kickstarter assy, shift forks and shift drum and shift shaft, that’s insane.
rippinruts 1/18/2018 11:02pm
1/18/2018 11:02pm Edited Date/Time 1/19/2018 12:21am
Wanna sell the full plastic kit? If it fits 250f 2016, i think it does. Also, wanna sell the shift lever and brake pedal?
cdoggy81
Profile picture for user cdoggy81
Posts
1313
Joined
1/1/2018
Location
St. Petersburg, FL US
cdoggy81 1/18/2018 11:19pm
1/18/2018 11:19pm
10-4 & thanks. Did you happen to swap any parts out by chance? Reason I ask is bc they look like slightly different motors. The engine in the bike looks like new with little wear on the clutch cover & a big scratch below the A in Yamaha. The engine out of the bike is dirty & has significant wear on the clutch cover & no major scratches below the A. Not sure how a blown bike manages to get more wear & more dirt on it after the fact when it cant be ridden but then again I'm probably totally wrong though, bad glaucoma so I should probably smoke my meds now... :]
4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY US
4csHATER 1/19/2018 5:10am
1/19/2018 5:10am
@cdoggy that was pics of the bike before it was abused. That was when it was running... not now. And no I don’t want to sell the plastic kit. I’m in process of building a 250 and I need it, sorry @cdoggy81 for being unclear the bike was ridden before I got it but those were the advertised pics of it when I found it. Sorry it was just a pic for model reference. The bike does show wear. But like I stated above it’s better me being honest with condition instead of vapor blasting and getting it looking new again and sell for a super high price like some of these dickheads do.
rippinruts 1/19/2018 9:26am
1/19/2018 9:26am
4csHATER wrote:
@cdoggy that was pics of the bike before it was abused. That was when it was running... not now. And no I don’t want to sell...
@cdoggy that was pics of the bike before it was abused. That was when it was running... not now. And no I don’t want to sell the plastic kit. I’m in process of building a 250 and I need it, sorry @cdoggy81 for being unclear the bike was ridden before I got it but those were the advertised pics of it when I found it. Sorry it was just a pic for model reference. The bike does show wear. But like I stated above it’s better me being honest with condition instead of vapor blasting and getting it looking new again and sell for a super high price like some of these dickheads do.
no brake and shift pedal either?
4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY US
4csHATER 1/20/2018 11:05am
1/20/2018 11:05am
FiveFortyMoto.com wrote:
Do you have a left radiator?
I have a left radiator for sure. Just to be clear it is the one with out the cap correct?
4csHATER
Profile picture for user 4csHATER
Posts
551
Joined
4/11/2017
Location
The sticks, KY US
4csHATER 1/20/2018 10:30pm
1/20/2018 10:30pm
Yes I have one I think. It may be dinged up let me check I’ll post a pic later today.

Post a reply to: YZ450F 14-17 Parts.