Posts
27513
Joined
7/22/2007
Location
St Helens, OR
US
I think I'll be putting my 18' TC 250 up for sale here in a couple weeks. It just like what you see in the photo , minus the pipe and silencer. Cost of the bike and the add-on's I have probably a little under $9,000.00 into it.
Head has been milled from the stock 0.067" to 0.045" ( the way it should have been ). I also replaced the stock Mikuni Carb with a PWK 38 and JD jetting kit. Replaced the stock reeds with a Boyesen rad valve. I have a little over 1K into my suspension as well , with all the work being done from FC , and is setup for a 185lb vet expert. I also have a 1" taller " medium " seat foam and seat cover installed.
I have all the stock parts that came off the bike still here as well. The stock reed cage , Mikuni carb , seatfoam and cover. Thought I'd ask opinions on this first before I list it for sale.
Head has been milled from the stock 0.067" to 0.045" ( the way it should have been ). I also replaced the stock Mikuni Carb with a PWK 38 and JD jetting kit. Replaced the stock reeds with a Boyesen rad valve. I have a little over 1K into my suspension as well , with all the work being done from FC , and is setup for a 185lb vet expert. I also have a 1" taller " medium " seat foam and seat cover installed.
I have all the stock parts that came off the bike still here as well. The stock reed cage , Mikuni carb , seatfoam and cover. Thought I'd ask opinions on this first before I list it for sale.
3-400 delta right there
The Shop
And Ryan , you said the exact number two of my buddies told me. I'll put it up for sale at $6500.00 and go from there. No hurry to sell honestly.
Mine just sold locally for the full 6k. I was kind of hoping it wasn’t going to sell 😂
@Swapper......mainly because I think I need to thin the heard. I have 3 bikes right now , and haven't been able to ride for over a year due to a hand injury. I don't know if I'll be able to ride again because of it. I will try and see what happens , but with the problems my hand is still giving me after over a year , I don't know if it will be possible. I still have my TC 125 and my project bike 2006 RC replica RM250 which I plan to hold onto for now.
I regretted selling most of my 2 strokes
For ref, my 19 TC250 :
38 unmolested hours (slow Vet C)
R/T spring conversion- revalved F/R
Ride Eng link and knuckle
Boyesen Rad Valve
Jetted per AJ thread (and works fine)
Flywheel weight
FMF 2.1 Ti silencer
Guts seat foam and cover
ODI Podium CFT bars
All stock parts on hand
Chains/filter/tires /brake with plenty of life
The Dealer I bought it from (and my 17) is giving me $5,500. Not pushing it but not outrageous either.
A 20 with less hours sold locally not long ago or $6K...
Post a reply to: What's it worth? 2018 Husky TC 250 with 6.8 hrs.