WTB 2012 crf250r triple clamps (xtrig, neken, etc) and Hinson clutch basket

afk66
Posts
218
Joined
7/28/2018
Location
Mechanicsville, MD US
11/11/2018 7:20pm Edited Date/Time 11/14/2018 9:35am
Looking for a good set of triple clamps and a Hinson clutch basket that will fit a crf250r 2012.
|
macz400
Posts
1391
Joined
8/20/2013
Location
League City, TX US
11/11/2018 7:54pm
afk66 wrote:
Looking for a good set of triple clamps and a Hinson clutch basket that will fit a crf250r 2012.
I got a set of 20mm Red ride engineering clamps barely used, and a stock set of 22mm 17 CRF450 triple clamps with low hours.
afk66
Posts
218
Joined
7/28/2018
Location
Mechanicsville, MD US
11/12/2018 6:12am
afk66 wrote:
Looking for a good set of triple clamps and a Hinson clutch basket that will fit a crf250r 2012.
macz400 wrote:
I got a set of 20mm Red ride engineering clamps barely used, and a stock set of 22mm 17 CRF450 triple clamps with low hours.
How much for the ride engineering? To get newer year clamps to fit all I need is a different lower bearing and race correct?
macz400
Posts
1391
Joined
8/20/2013
Location
League City, TX US
11/12/2018 6:32am
afk66 wrote:
Looking for a good set of triple clamps and a Hinson clutch basket that will fit a crf250r 2012.
macz400 wrote:
I got a set of 20mm Red ride engineering clamps barely used, and a stock set of 22mm 17 CRF450 triple clamps with low hours.
afk66 wrote:
How much for the ride engineering? To get newer year clamps to fit all I need is a different lower bearing and race correct?
$360 shipped to your door if your in the U.S. these are off a 2017, to put them on your 12 just switch out the lower bearing and race to your 2012 style and your good to go. Everything else mounts up perfectly.
afk66
Posts
218
Joined
7/28/2018
Location
Mechanicsville, MD US
11/13/2018 7:18pm
macz400 wrote:
I got a set of 20mm Red ride engineering clamps barely used, and a stock set of 22mm 17 CRF450 triple clamps with low hours.
afk66 wrote:
How much for the ride engineering? To get newer year clamps to fit all I need is a different lower bearing and race correct?
macz400 wrote:
$360 shipped to your door if your in the U.S. these are off a 2017, to put them on your 12 just switch out the lower...
$360 shipped to your door if your in the U.S. these are off a 2017, to put them on your 12 just switch out the lower bearing and race to your 2012 style and your good to go. Everything else mounts up perfectly.
I appreciate offering the clamps. I was really hoping for a dampend set like the xtrig or neken sfs. I’m trying to remedy some wrist issues rode a friends bike with xtrig and it didn’t seem to bother me. I appreciate your time.

The Shop

macz400
Posts
1391
Joined
8/20/2013
Location
League City, TX US
11/14/2018 3:57am Edited Date/Time 11/14/2018 3:58am
afk66 wrote:
How much for the ride engineering? To get newer year clamps to fit all I need is a different lower bearing and race correct?
macz400 wrote:
$360 shipped to your door if your in the U.S. these are off a 2017, to put them on your 12 just switch out the lower...
$360 shipped to your door if your in the U.S. these are off a 2017, to put them on your 12 just switch out the lower bearing and race to your 2012 style and your good to go. Everything else mounts up perfectly.
afk66 wrote:
I appreciate offering the clamps. I was really hoping for a dampend set like the xtrig or neken sfs. I’m trying to remedy some wrist issues...
I appreciate offering the clamps. I was really hoping for a dampend set like the xtrig or neken sfs. I’m trying to remedy some wrist issues rode a friends bike with xtrig and it didn’t seem to bother me. I appreciate your time.
The Xtrig clamps and their bar mount system is mainly for vibrations than big hits. The rubber mount system on the ride engineering clamps, and the SFS air system on the Nekens are better for big hits and jolts to your hands.
afk66
Posts
218
Joined
7/28/2018
Location
Mechanicsville, MD US
11/14/2018 8:22am
macz400 wrote:
$360 shipped to your door if your in the U.S. these are off a 2017, to put them on your 12 just switch out the lower...
$360 shipped to your door if your in the U.S. these are off a 2017, to put them on your 12 just switch out the lower bearing and race to your 2012 style and your good to go. Everything else mounts up perfectly.
afk66 wrote:
I appreciate offering the clamps. I was really hoping for a dampend set like the xtrig or neken sfs. I’m trying to remedy some wrist issues...
I appreciate offering the clamps. I was really hoping for a dampend set like the xtrig or neken sfs. I’m trying to remedy some wrist issues rode a friends bike with xtrig and it didn’t seem to bother me. I appreciate your time.
macz400 wrote:
The Xtrig clamps and their bar mount system is mainly for vibrations than big hits. The rubber mount system on the ride engineering clamps, and the...
The Xtrig clamps and their bar mount system is mainly for vibrations than big hits. The rubber mount system on the ride engineering clamps, and the SFS air system on the Nekens are better for big hits and jolts to your hands.
So it’s fair to say that the rode engineering clamps could potentially perform in a way I’m looking for? I don’t know much about them. If they will I’ll take them.
macz400
Posts
1391
Joined
8/20/2013
Location
League City, TX US
11/14/2018 8:49am Edited Date/Time 11/14/2018 9:35am
Yes, the ride engineering along with OEM Honda clamps are rubber mounted to the top clamp to soften the blows to jolts and big kicks. The xtrig system ( PHDS) I believe it's called, is elastomers up top on the actual clamping spot to the bar to soften vibrations. With the ride engineering system you can also purchase firmer or softer cones from them to make a firmer or softer feel.
Running rubber mounted bars along with 1-1/8 crossbar less bar should make a big difference. Shoot me a text st 4092562307 if your interested in the clamps.

Post a reply to: WTB 2012 crf250r triple clamps (xtrig, neken, etc) and Hinson clutch basket

The Latest