WANTED: 05-07 Honda CR125 engine or parts

sdhuskyrider
Profile picture for user sdhuskyrider
Posts
357
Joined
10/27/2017
Location
San Diego, CA US
sdhuskyrider
Edited Date/Time 10/9/2018 10:57am
Looking to put together a complete 05-07 CR125 motor.
|
sdhuskyrider
Profile picture for user sdhuskyrider
Posts
357
Joined
10/27/2017
Location
San Diego, CA US
sdhuskyrider 9/29/2018 10:16am
9/29/2018 10:16am
Crankcases and a complete top end would be fine too. 99% of the transmission swaps over to the 05-07 save for the countershaft and few bushings and washers.
jaredtebo17
Profile picture for user jaredtebo17
Posts
346
Joined
3/16/2016
Location
Raymore, MO US
Fantasy
2008th
jaredtebo17 9/30/2018 5:34am
9/30/2018 5:34am
Depending on your budget, I have a fully rebuilt 2006 CR125 motor that MotoWhips built for me.


The motor has a brand new cylinder, head, crank, bearings, top end, all Honda parts. Head is cut for C12 only, also have a full Hinson clutch setup, and Keihin carb.

I had it rebuilt in 2017, but I decided to part out my 125. The engine only has 30 minutes of break in on it.

The rebuild alone cost me $2600, if your interested, I would sell it for $2200. I also have a stock pipe that is raw.


1
sdhuskyrider
Profile picture for user sdhuskyrider
Posts
357
Joined
10/27/2017
Location
San Diego, CA US
sdhuskyrider 9/30/2018 9:41am
9/30/2018 9:41am
jaredtebo17 wrote:
Depending on your budget, I have a fully rebuilt 2006 CR125 motor that MotoWhips built for me. [img]https://p.vitalmx.com/photos/forums/2018/09/30/290384/s1200_ED494F92_BE7D_4873_87C2_CFF152CA6C3F.jpg[/img] The motor has a brand new cylinder, head...
Depending on your budget, I have a fully rebuilt 2006 CR125 motor that MotoWhips built for me.


The motor has a brand new cylinder, head, crank, bearings, top end, all Honda parts. Head is cut for C12 only, also have a full Hinson clutch setup, and Keihin carb.

I had it rebuilt in 2017, but I decided to part out my 125. The engine only has 30 minutes of break in on it.

The rebuild alone cost me $2600, if your interested, I would sell it for $2200. I also have a stock pipe that is raw.


Awesome stuff man but I can do the work Motowhips does as save myself a ton. I'm actually getting ready to purchase a vapor blaster. Thanks for the offer though!
jaredtebo17
Profile picture for user jaredtebo17
Posts
346
Joined
3/16/2016
Location
Raymore, MO US
Fantasy
2008th
jaredtebo17 9/30/2018 11:55am
9/30/2018 11:55am
sdhuskyrider wrote:
Awesome stuff man but I can do the work Motowhips does as save myself a ton. I'm actually getting ready to purchase a vapor blaster. Thanks...
Awesome stuff man but I can do the work Motowhips does as save myself a ton. I'm actually getting ready to purchase a vapor blaster. Thanks for the offer though!
No problem ??

The Shop

See All »
dylanv21
Profile picture for user dylanv21
Posts
414
Joined
10/3/2013
Location
Fresno, CA US
dylanv21 10/9/2018 10:57am
10/9/2018 10:57am
jaredtebo17 wrote:
Depending on your budget, I have a fully rebuilt 2006 CR125 motor that MotoWhips built for me. [img]https://p.vitalmx.com/photos/forums/2018/09/30/290384/s1200_ED494F92_BE7D_4873_87C2_CFF152CA6C3F.jpg[/img] The motor has a brand new cylinder, head...
Depending on your budget, I have a fully rebuilt 2006 CR125 motor that MotoWhips built for me.


The motor has a brand new cylinder, head, crank, bearings, top end, all Honda parts. Head is cut for C12 only, also have a full Hinson clutch setup, and Keihin carb.

I had it rebuilt in 2017, but I decided to part out my 125. The engine only has 30 minutes of break in on it.

The rebuild alone cost me $2600, if your interested, I would sell it for $2200. I also have a stock pipe that is raw.


I see you have a lot of random parts... Anything you want to get rid of from your 125?

Post a reply to: WANTED: 05-07 Honda CR125 engine or parts