Trade handlebars?

Related:
Create New Tag

1/10/2021 6:47 PM

I am just getting back into the sport after a 20 year lay-off. I picked up a 13 CRF450R last month and it came with an extra set of Pro Taper EVO YZ High bars in the magnesium color. I put them on and tried them out today. They are a little too high with a bit much sweep for my liking. Figured maybe someone is in the opposite boat as me and would be interested in swapping. Let me know what have. If interested I can take photos if you’d like.

Thanks,

Stephen

|

1/11/2021 5:58 AM

I have a Protaper EVO Husqvarna bend I would trade. It is almost the lowest they make. 4mm lower and 1mm less sweep than the YZ High according to the Protaper site. It is black, and I cut 5mm off each end because that bend is super wide. I also have the stock Yamaha bar but I think it will be real close or a hair shorter than what you have. It is supposed to be close to the Protaper Evo SX race bend.

|

1/11/2021 6:41 AM

wrc777 wrote:

I have a Protaper EVO Husqvarna bend I would trade. It is almost the lowest they make. 4mm lower and 1mm less sweep than the YZ High according to the Protaper site. It is black, and I cut 5mm off each end because that bend is super wide. I also have the stock Yamaha bar but I think it will be real close or a hair shorter than what you have. It is supposed to be close to the Protaper Evo SX race bend.

Sent you a PM

|

1/11/2021 12:46 PM

wrc777 wrote:

I have a Protaper EVO Husqvarna bend I would trade. It is almost the lowest they make. 4mm lower and 1mm less sweep than the YZ High according to the Protaper site. It is black, and I cut 5mm off each end because that bend is super wide. I also have the stock Yamaha bar but I think it will be real close or a hair shorter than what you have. It is supposed to be close to the Protaper Evo SX race bend.

I will buy you husky evo bars if your deal don't work out.

|

1/11/2021 1:49 PM

wrc777 wrote:

I have a Protaper EVO Husqvarna bend I would trade. It is almost the lowest they make. 4mm lower and 1mm less sweep than the YZ High according to the Protaper site. It is black, and I cut 5mm off each end because that bend is super wide. I also have the stock Yamaha bar but I think it will be real close or a hair shorter than what you have. It is supposed to be close to the Protaper Evo SX race bend.

New to the site so I’m not even sure if the PM went through or how to tell. I’ll trade you for the Husky bend.

|