Rmz 450 Hinson inner hub

451motox
Profile picture for user 451motox
Posts
292
Joined
7/21/2016
Location
Duluth, GA US
451motox
Edited Date/Time 1/25/2019 10:17am
I’m selling my Hinson inner hub with 7 hours on it before removed from my bike & sold . I dropped it on the floor before I installed it & it left a dent on the outer side of hub & hasn’t affected the clutch action in any way at all & shows no dent or damage along the other side . Only want $90 bucks + shipping
You can call or text 470 709 7095 if you have any questions






|

The Shop

See All »
451motox
Profile picture for user 451motox
Posts
292
Joined
7/21/2016
Location
Duluth, GA US
451motox 1/24/2019 5:55pm
1/24/2019 5:55pm
Hickory88 wrote:
Will it work with Stock pressure plate?
I’m pretty sure it will Im about 90% sure it will
451motox
Profile picture for user 451motox
Posts
292
Joined
7/21/2016
Location
Duluth, GA US
451motox 1/25/2019 8:30am
1/25/2019 8:30am
Hickory88 wrote:
Will it work with Stock pressure plate?
Just got off the phone with Hinson & they said it will not work with stock pressure plate
langhammx
Profile picture for user langhammx
Posts
8928
Joined
5/5/2011
Location
Santa Clarita, CA US
Fantasy
455th
langhammx 1/25/2019 9:08am
1/25/2019 9:08am
Hickory88 wrote:
Will it work with Stock pressure plate?
451motox wrote:
Just got off the phone with Hinson & they said it will not work with stock pressure plate
That’s odd, I’ve done it with a 250.
Sorry for the bad info... Dizzy
Hickory88
Profile picture for user Hickory88
Posts
40
Joined
7/19/2018
Location
Dillsburg, PA US
Hickory88 1/25/2019 10:17am
1/25/2019 10:17am
Thanks for straight forward and being honest.
Polishhammer 1/25/2019 4:11pm
1/25/2019 4:11pm
A lot of oem pressure plates have a lot of flex. If u pull the clutch cover off, then slowly pull the clutch lever in u can usually see the center part of the pressure plate flexing outward while the outside ring of the pressure plate is still pressed hard against the plates.
That inner hub is priced good. With a good basket and pressure plate you’ll have an excellent setup on that Suzuki.

Post a reply to: Rmz 450 Hinson inner hub