Complete 2004 YZ250 Part out/breaking..Lots of parts!

Related:
Create New Tag

10/4/2019 7:26 AM
Edited Date/Time: 10/4/2019 8:21 AM

BREAKING Yamaha YZ250 2004.

Bike is located in the UK

Bikes is complete and all parts are currently available..comment below with the part you require.

Spec list on this bike is absolutely huge so please bare with me, I’ll try my a absolute best to try and include everything.

I have the receipts and paper work for every single part on this bike and also documented the whole build process from start to finish.

Bike was stripped to the bare frame, frame was then powder coated and clear coated for extra protection.

Engine was completely disassembled, engine cases were vapour blasted and the whole engine was completely rebuilt.

No expense has been spared building this bike as can be seen from the pictures.

Every single part of this bike has been rebuilt or replaced and also has some one off parts from factory race teams.



Spec list -


- Pro Circuit triple clamps

- Pro Circuit bar clamps

- Pro Circuit works front pipe

- Pro Circuit Ti-2 carbon kevlar silencer

- Pro Circuit clutch cover

- Pro Circuit axle blocks

- Excel Rims with Talon hubs and brand new Michelin starcross tyres.

- Lightspeed carbon ignition cover

- Lightspeed carbon rear disc guard

- Lightspeed carbon chain guide

- Lightspeed carbon frame guards

- Extreme Carbon rear shock guard

- One off carbon fuel cap

- Works Connection fuel breather (not pictured)

- One off carbon exhaust bracket

- CRF front brake master cylinder

- CRF front brake caliper

- Titanium Nitride rear caliper piston

- GYTR front brake hose clamp

- HEL braided brake hoses front and rear

- Braking wavy discs

- KYB Factory Shock from Cooper Webb’s Star Racing Yamaha

- YZF SSS Forks with Titanium Nitride coatings

- Works Connection clutch perch and lever

- ARC Brake Lever

- Full Wiseco clutch

- Vertex forged piston

- PRO X crank

- New Footpegs

- Twin Air powerflow filter cage

- Renthal Twinwall Handlebars

- Completely rebuilt and jetted carburettor with thermal coating and ported and textured bell mouth

- Yoshimura steering stem nut

- Renthal front and rear sprocket

- DID chain

- Genuine Yamaha case saver

- 90% of the bolts have been replaced with titanium, even the air filter bolt was replaced with titanium

- New radiators

- Blue silicone hoses

- New plastics and graphics

- All bearings and seals have been replaced throughout the bike and the rear shock/forks were completely rebuilt


Pretty sure there is more but that’s all I can remember off the top of my head.

Any questions, please feel free to ask.

Thanks for looking smile

Photo

Photo

Photo

Photo

Photo

Photo

Photo

Photo

Photo









|

10/4/2019 8:03 AM

Is the offset on the clamps stock?

Super clean steelie build btw.

|

10/4/2019 8:05 AM

TheTrackKid wrote:

Is the offset on the clamps stock?

Super clean steelie build btw.

I believe so yes, and thanks man

|

10/4/2019 8:16 AM

Been playing with the idea of clamps. How much ya want?

|

10/4/2019 8:26 AM

TheTrackKid wrote:

Been playing with the idea of clamps. How much ya want?

I’d do the triples and bar clamps for 300 bucks. I’m located in the UK though so they’ll have to be shipped

|

10/4/2019 8:32 AM

Let me ponder it. Might do more parts if I decide to. I’ll get back to you 👍🏻

|

10/4/2019 9:13 AM
Edited Date/Time: 10/4/2019 9:14 AM

TheTrackKid wrote:

Let me ponder it. Might do more parts if I decide to. I’ll get back to you

👍

|

10/4/2019 9:18 AM

Sick Bike...Someone needs to buy that complete!!! If it were stateside I would...GLWS

|

#MNmoto #bLUcRU #victorYZone

10/4/2019 9:22 AM

Price for the lightspeed ignition cover?

|

10/4/2019 11:42 AM

hdogg21 wrote:

Sick Bike...Someone needs to buy that complete!!! If it were stateside I would...GLWS

Thanks man I appreciate that smile

|

10/4/2019 11:43 AM

mxer911 wrote:

Price for the lightspeed ignition cover?

£100 posted in the UK smile

|

10/4/2019 11:47 AM

Can you please price the Ti-2 Silencer to USA/zip 22656 please.

|

10/4/2019 12:09 PM

nch209 wrote:

Can you please price the Ti-2 Silencer to USA/zip 22656 please.

Just priced it up bud, honestly by the time I’ve factored in shipping it’ll be cheaper for you to get one from the PC website for $329

|

10/4/2019 12:27 PM

Very nice bike!,

|

10/4/2019 12:31 PM

nch209 wrote:

Can you please price the Ti-2 Silencer to USA/zip 22656 please.

deccr250 wrote:

Just priced it up bud, honestly by the time I’ve factored in shipping it’ll be cheaper for you to get one from the PC website ...more

Cool. Thanks for checking. GLWS- nice bike!

|

10/4/2019 12:41 PM

nch209 wrote:

Cool. Thanks for checking. GLWS- nice bike!

No worries man, thanks very much smile

|

10/4/2019 3:43 PM

Can you price the Carbon Ignition Cover, axle blocks, GYTR front brake clamp, and Radiator hoses shipped to US? 93003. hopkins.tucker@gmail.com is my email if that’s easier for you. Thanks.

|

10/4/2019 11:04 PM

motohead154 wrote:

Can you price the Carbon Ignition Cover, axle blocks, GYTR front brake clamp, and Radiator hoses shipped to US? 93003. ...more

I’ve emailed you bud, cheers smile

|

10/5/2019 11:35 AM

Ignition cover and rad hoses now sold! Thanks smile

|

10/9/2019 1:13 PM

Stop the insanity, take that baby to the track and let it feed !!!

|

10/9/2019 1:56 PM

I’m interested in the frame guards, shoot me a price posted to 95677 if you can.
Colinclaymoto@gmail.com

|

10/10/2019 6:43 AM

Full exhaust system, WC clutch setup and carbon chain guide now sold, thanks smile

|

10/10/2019 8:28 AM

cclay47 wrote:

I’m interested in the frame guards, shoot me a price posted to 95677 if you can.
Colinclaymoto@gmail.com

hey Cclay, you know you can fit the aluminum framed ones to the steely. I've never seen it done before but tried it myself it it fits near perfectly. I trimmed the plastic in a few spots so it sat closer to the frame but it looks way better imho.

Photo

|

10/10/2019 6:21 PM

cclay47 wrote:

I’m interested in the frame guards, shoot me a price posted to 95677 if you can.
Colinclaymoto@gmail.com

DuroTools wrote:

hey Cclay, you know you can fit the aluminum framed ones to the steely. I've never seen it done before but tried it myself it ...more

Thanks but I’m after carbon guards specifically for 03/04. I tried 05 carbon guards and they don’t fit well enough for my liking.

|

10/10/2019 11:47 PM

Reservoir?

|