Posts
1391
Joined
8/20/2013
Location
League City, TX
US
Edited Date/Time
7/10/2018 10:39am
38mm Mikuni carb off my 18 KTM 150SX works great and comes with all the extra needles and jets. Will work on lots of other 2 stroke bikes. $250 with free shipping in the U.S Robinmac82@yahoo.com
I actually got the carb jetting specs from KTM Race team and the bike rips !! I feel no need to bother changing carbs.
Skip to 8 min 55 sec:
https://youtu.be/KZb_DFSVNbk
The Shop
42-71 needle in the 3rd (w/stock pipe)
(2nd w/FMF Fatty and 2.1)
470 main
S-4 nozzle
2- 2 1/2 air screw
I don’t have the 250’s but I will see if I can get them.
This is what worked best for me on C12 mixed at 60:1. It should also be fine on 50/50 pump/race.
MJ 470
PJ 32.5
Slide 5.75
Needle 42-75
Clip 3rd position
Needle jet s-4
AS 2.0
Link for the slide https://www.motosport.com/oem-parts/part-number/16025-0003?mmysource=ka…
or you can have the stock one modified cheaper http://www.rb-designs.com/rb_designs_llc_013.htm
link for the needle https://www.babbittsktmparts.com/oemparts/p/ktm/55431034400/jet-needle-…
link for the needle jet https://www.babbittsktmparts.com/oemparts/p/ktm/55431021400/needle-jet-…
Video so you can hear the bike run and on track. Notice no hanging idle and no hesitation with instant throttle response.
https://youtu.be/mgZzfxMrA04
Already have a pretty good setting for my '17 TC250, but wouldn't mind trying a another one.
Post a reply to: 38mm Mikuni carb only 3hrs on it