Posts
220
Joined
2/27/2016
Location
VA
US
MX678
11/25/2018 10:49am
11/25/2018 10:49am
Edited Date/Time
11/28/2018 9:16am
I think I’m going to sell my pride and joy. I built this bike after I broke my arm two years ago while I was waiting to heal. Haven’t healed to a manner in which I think I can safely ride. So the bike has been sitting. Bike has less than 1 hour on it. Suspension is set up for 190lbs B Motocross rider. $17k
What is installed:
Replaced the white bodywork with OEM orange plastic.
WP cone valves- approx 7hrs on forks
WP Trax Shock - new just installed
FMF titanium exhaust
Brembo SXS calipers front and rear - approx 7 hrs
Kite hubs with DID Dirtstar STX rims
Nekken SFS triple clamps- both top and bottom
Raptor titanium pegs - approx 7 hrs
Orange KTM water pump cover, rear brake pedal, oil filter cover (not installed)
Blue motohose
KTM levers
Rental Fat bars
Tamer holeshot device
Over $1k in titanium bolts
Tokyo mods flashed ECU for exhaust change
KTM aluminum gas cap
KTM skid plate
Spares:
Kite wheels with DID Dirtstar STX - approx 7 hrs
Stock AER forks and shock - 0 hrs
Stock bodywork
Akrapovic full titanium exhaust - approx 7 hrs
Stock triple clamps
Stock handle bars
Stock chain and sprockets - 0 hrs
Stock calipers
What is installed:
Replaced the white bodywork with OEM orange plastic.
WP cone valves- approx 7hrs on forks
WP Trax Shock - new just installed
FMF titanium exhaust
Brembo SXS calipers front and rear - approx 7 hrs
Kite hubs with DID Dirtstar STX rims
Nekken SFS triple clamps- both top and bottom
Raptor titanium pegs - approx 7 hrs
Orange KTM water pump cover, rear brake pedal, oil filter cover (not installed)
Blue motohose
KTM levers
Rental Fat bars
Tamer holeshot device
Over $1k in titanium bolts
Tokyo mods flashed ECU for exhaust change
KTM aluminum gas cap
KTM skid plate
Spares:
Kite wheels with DID Dirtstar STX - approx 7 hrs
Stock AER forks and shock - 0 hrs
Stock bodywork
Akrapovic full titanium exhaust - approx 7 hrs
Stock triple clamps
Stock handle bars
Stock chain and sprockets - 0 hrs
Stock calipers
The Shop
Cone Valves with Tamer launch control and fork guards: Approx 7hrs on them - $3250
Trax Shock - $2000
Akrapovic Full Exhaust: Approx 7hrs - $500
Set of Kite Wheels: Approx 7hrs - $1000 (no tires)
Nekken SFS Triple Clamp (Complete Set) $500
Raptor Titanium Pegs: Approx 7 hrs $250
Do you mind me asking who did the backgrounds? I have been tossing the idea around on the orange number plates but wondered on the graphics while keeping it close to the factory look..
One more question, does the Matrix stand keep both tires off the ground? I know crazy question... Sorry to hijack.
Great luck on the sale.
Good Luck on the sale.
Post a reply to: 2017.5 KTM 450 SX-F Factory Edition plus spares