2016.5 KTM 450 Factory Editions and 52mm forks

Related:
Create New Tag

11/22/2017 8:47 PM
Edited Date/Time: 11/22/2017 8:48 PM

Like new 2016.5 KTM 450 Factory Edition with 31 hours. Also have exact same bike with ONLY 12 hours for $7,900. Everything is as new in perfect condition. Will sale with all new stock parts and factory edition plastic/graphics. Have extras, like FMF and wheelsets for additional $ if interested. Older style 52mm works forks with aluminum lowers and all the coatings set up for larger axle. One set of forks is Cone Valve while the other set is works spring forks, just no cone Valve in the mid speed. $3,500 CV forks with axle, 52mm clamps, caliper bracket set up for 180lb mx. Haven’t even ridden on since service and updated WP settings. $2,500 -Older works spring forks with 52mm clamps and everything needed to put on newer bikes, set up for GNCC type Racing. These would make an amazing spring fork set up! Clamps would need some additional adapting for newer front fenders to fit but fit on new frames. Photo

Photo

|

11/22/2017 8:52 PM

Photo

Photo

Photo

Photo

|

11/23/2017 3:47 AM
Edited Date/Time: 11/23/2017 3:48 AM

Any interest in selling the TLD graphics and seat? How much for the FMF system?

|

11/23/2017 6:44 AM

So you are sell 2 sets of 52mm? What is the difference, sorry I was confused by the way it was listed above.

Thank you!

|

11/23/2017 9:24 AM

CarlinoJoeVideo wrote:

So you are sell 2 sets of 52mm? What is the difference, sorry I was confused by the way it was listed above.

Thank you!

Yeah one set is a 52mm set with the traditional valving and the other is 52mm conevalves. I️ believe you can remove the cones or put them back into the set. The newer cone valves have a cone for off-road riding as the old ones didn’t so they would remove the cone.

|

11/23/2017 9:35 AM

Are the top clamps 60mm?

|

11/23/2017 10:01 AM

CarlinoJoeVideo wrote:

So you are sell 2 sets of 52mm? What is the difference, sorry I was confused by the way it was listed above.

Thank you!

CrGuy2T wrote:

Yeah one set is a 52mm set with the traditional valving and the other is 52mm conevalves. I️ believe you can remove the cones or put them back into the set. The newer cone valves have a cone for off-road riding as the old ones didn’t so they would remove the cone.

Exactly! Thank you. You know your stuff.

|

11/23/2017 10:06 AM

Huckster wrote:

Any interest in selling the TLD graphics and seat? How much for the FMF system?

I have a friend that just asked for the same....TLD graphics and one of the FMFs. If he backs out I’ll let you know. I think I’ll hang onto the other FMF set up for now. Sorry. I do have this complete graphics and plastic set up for sale if anyone is interested. $300 with the complete seat base or just $200 with the new cover, plus shipping.Photo

Photo

|

11/23/2017 1:22 PM
Edited Date/Time: 11/23/2017 1:23 PM

kdub84 wrote:

Exactly! Thank you. You know your stuff.

wink. I’d like to try them with no cones but with an mx valving. I️ bet it’s still a pretty good fork.
|

11/23/2017 2:29 PM

CrGuy2T wrote:

Yeah one set is a 52mm set with the traditional valving and the other is 52mm conevalves. I️ believe you can remove the cones or put them back into the set. The newer cone valves have a cone for off-road riding as the old ones didn’t so they would remove the cone.

kdub84 wrote:

Exactly! Thank you. You know your stuff.

CrGuy2T wrote: wink. I’d like to try them with no cones but with an mx valving. I️ bet it’s still a pretty good fork.

To be honest, that is the set up the SX Teams used for years. Not sure if some of them still are currently?

|

11/23/2017 3:05 PM

Huckster wrote:

Any interest in selling the TLD graphics and seat? How much for the FMF system?

kdub84 wrote:

I have a friend that just asked for the same....TLD graphics and one of the FMFs. If he backs out I’ll let you know. I think I’ll hang onto the other FMF set up for now. Sorry. I do have this complete graphics and plastic set up for sale if anyone is interested. $300 with the complete seat base or just $200 with the new cover, plus shipping.Photo

Photo

Ok, let me know.

|

11/23/2017 4:36 PM

kdub84 wrote:

To be honest, that is the set up the SX Teams used for years. Not sure if some of them still are currently?

That makes sense too.

|

11/23/2017 5:06 PM

Those 52 forks are so interesting, they’re rare to come across and the coatings and of course the width of the them are so cool. The lower fork tubes are about as fat as the stock fork upper tubes.

|

11/24/2017 12:56 AM

CarlinoJoeVideo wrote:

So you are sell 2 sets of 52mm? What is the difference, sorry I was confused by the way it was listed above.

Thank you!

CrGuy2T wrote:

Yeah one set is a 52mm set with the traditional valving and the other is 52mm conevalves. I️ believe you can remove the cones or put them back into the set. The newer cone valves have a cone for off-road riding as the old ones didn’t so they would remove the cone.

kdub84 wrote:

Exactly! Thank you. You know your stuff.

What are the offset on the clamps? Do you come to So cal, I see your are in NV.

Thanks! Can I PM or email you?

|

11/24/2017 6:53 AM

kdub84 wrote:

I have a friend that just asked for the same....TLD graphics and one of the FMFs. If he backs out I’ll let you know. I think I’ll hang onto the other FMF set up for now. Sorry. I do have this complete graphics and plastic set up for sale if anyone is interested. $300 with the complete seat base or just $200 with the new cover, plus shipping.Photo

Photo

I'm interested in the seat and plastics. Also, are you willing to negotiate on the CV forks with clamps ??

|

11/24/2017 9:55 AM

CrGuy2T wrote:

Yeah one set is a 52mm set with the traditional valving and the other is 52mm conevalves. I️ believe you can remove the cones or put them back into the set. The newer cone valves have a cone for off-road riding as the old ones didn’t so they would remove the cone.

kdub84 wrote:

Exactly! Thank you. You know your stuff.

CarlinoJoeVideo wrote:

What are the offset on the clamps? Do you come to So cal, I see your are in NV.

Thanks! Can I PM or email you?

One set of orange clamps is 18 and the other 20. The other clamps are adjustable from 20-22. I come to CA quite a bit. Feel free to txt or email me with any questions walchracing@hotmail.com. 7026729611 If you wanted we could meet up so you can check them out or even try to ride with them if that could work out. I have a 17.5 with the set up on that you could try. ?? Photo

|

11/24/2017 12:18 PM

Huckster wrote:

Any interest in selling the TLD graphics and seat? How much for the FMF system?

kdub84 wrote:

I have a friend that just asked for the same....TLD graphics and one of the FMFs. If he backs out I’ll let you know. I think I’ll hang onto the other FMF set up for now. Sorry. I do have this complete graphics and plastic set up for sale if anyone is interested. $300 with the complete seat base or just $200 with the new cover, plus shipping.Photo

Photo

chrislauro134 wrote:

I'm interested in the seat and plastics. Also, are you willing to negotiate on the CV forks with clamps ??

CVs are pending sale. I’ll let you know if it doesn’t go through. The plastic and graphics are yours if you still want them.

|

11/24/2017 12:31 PM
Edited Date/Time: 11/24/2017 3:44 PM

kdub84 wrote:

I have a friend that just asked for the same....TLD graphics and one of the FMFs. If he backs out I’ll let you know. I think I’ll hang onto the other FMF set up for now. Sorry. I do have this complete graphics and plastic set up for sale if anyone is interested. $300 with the complete seat base or just $200 with the new cover, plus shipping.Photo

Photo

chrislauro134 wrote:

I'm interested in the seat and plastics. Also, are you willing to negotiate on the CV forks with clamps ??

kdub84 wrote:

CVs are pending sale. I’ll let you know if it doesn’t go through. The plastic and graphics are yours if you still want them.

Let me know how much and how to pay. I will take the seat if its available also. I can paypal you for the TLD plastic and seat

|

11/25/2017 5:21 PM

chrislauro134 wrote:

I'm interested in the seat and plastics. Also, are you willing to negotiate on the CV forks with clamps ??

kdub84 wrote:

CVs are pending sale. I’ll let you know if it doesn’t go through. The plastic and graphics are yours if you still want them.

Huckster wrote:

Let me know how much and how to pay. I will take the seat if its available also. I can paypal you for the TLD plastic and seat

Sorry for delayed response. If you want the complete seat $300 and I’ll pay shipping or if you just want the cover $200 and I’ll pay shipping. You can PayPal me, walchracing@hotmail.com. Let me know if you have any questions. I can ship Monday.

|

11/25/2017 6:07 PM

kdub84 wrote:

Sorry for delayed response. If you want the complete seat $300 and I’ll pay shipping or if you just want the cover $200 and I’ll pay shipping. You can PayPal me, walchracing@hotmail.com. Let me know if you have any questions. I can ship Monday.

I just sent you paypal payment and an email.

Thanks

|

11/26/2017 2:06 AM

kdub84 wrote:

Exactly! Thank you. You know your stuff.

CarlinoJoeVideo wrote:

What are the offset on the clamps? Do you come to So cal, I see your are in NV.

Thanks! Can I PM or email you?

kdub84 wrote:

One set of orange clamps is 18 and the other 20. The other clamps are adjustable from 20-22. I come to CA quite a bit. Feel free to txt or email me with any questions walchracing@hotmail.com. 7026729611 If you wanted we could meet up so you can check them out or even try to ride with them if that could work out. I have a 17.5 with the set up on that you could try. ?? Photo

I sent you an email. Let me know when you have time!

|