2003 cr250r need gone

bh
Posts
949
Joined
12/25/2016
Location
Piedmont, SC US
Edited Date/Time 12/4/2019 9:31am
2003 cr250r

Very original bike
Original top end was replaced last spring with a pro x one. Cases have never been split. Bike does have a title. Bike comes with a lot of extras and spares. The only thing not original is the carb which was swapped for a pwk air striker. And the bike has race tech gold valves front and rear. Comes with all the shims to set up for what ever riding you need. Currently set up for 190 pound c rider. Has been very reliable, always kept the jetting good and replaced the oil and air filter after every ride.

Asking 3000 call or text 864-4three4-three757

In August the bike has all the linkage and swingarm bearings replaced with oem bearings in the linkage and pivot works in the swingarm. And the steering stem bearing were greased. Also had a mx bonz air filter seal kit installed. Bike also had new tires installed.

The suspension was also recently rebuild with all new oem seals, bushings, bladder, and bumper.

Extras for an extra cost.

-2 sets of oem radiators
-spare front brake mc and caliper
-rear hub
-new oem clutch and throttle cables
-front wheel
-rotors
-seat
-spark plugs
-needle
-foot pegs


|
bh
Posts
949
Joined
12/25/2016
Location
Piedmont, SC US
11/10/2019 4:22pm Edited Date/Time 11/24/2019 5:45am
bh
Posts
949
Joined
12/25/2016
Location
Piedmont, SC US
11/22/2019 10:43am
Bump
bh
Posts
949
Joined
12/25/2016
Location
Piedmont, SC US
11/24/2019 5:50am






The Shop

bh
Posts
949
Joined
12/25/2016
Location
Piedmont, SC US
12/4/2019 9:30am
Bump
1

Post a reply to: 2003 cr250r need gone

The Latest