2003 Cr250 Honda

Driven 755
Posts
5
Joined
2/23/2018
Location
Zimmerman, MN US
7/9/2018 7:53am Edited Date/Time 7/10/2018 4:46pm
For sale- $5,000
-10 hours on bottom end, top end has 5 hours.
-full Hinson clutch with new spare plates.
-2016 kx fork and shock valved to 130lbs
-pro circuit works pipe and silencer
-Neken clamps
-renthal twin walls
-keihin carb
-loud mouth intake

Text if interested.763twofour58371


1
|
281moto
Posts
156
Joined
5/22/2017
Location
Houston, TX US
7/10/2018 4:17pm
Kawi shocks fit on these bikes?
Driven 755
Posts
5
Joined
2/23/2018
Location
Zimmerman, MN US
7/10/2018 4:46pm
281moto wrote:
Kawi shocks fit on these bikes?
-Shock is from a 2015 kx450, the valving felt good once it was redone. Length is 3/8” shorter if I remember correctly. So it drops the rear end about 1” to 1.5. The reservoir is also clocked slightly different which doesn’t matter with the Oem plastic, it will if you get the newer style conversion.
-fork is from a 2016kx250. Length seemed about the same. You need to use kx clamps as the tube diameter is different. The bottom steer bearings are the same but you need to use the kx upper bearing.

Post a reply to: 2003 Cr250 Honda

The Latest