Posts
948
Joined
12/25/2016
Location
Piedmont, SC
US
bh
11/10/2019 3:53pm
11/10/2019 3:53pm
Edited Date/Time
12/4/2019 9:32am
2002 cr125
Bike has been maintained to a tee. Oil changed and air filter cleaned after every ride. Bearings have always been greased after about 20 hours of riding and are tight.
Asking 2600 if your interested call or text 864-4three4-thee757 bike comes with a lot of spares and extras listed below for an extra cost
Motor:
-96 hpp cylinder for better pv design
-Phat head racing head with removable domes (comes with 2 domes)
-Hinson basket
-07 oem crank (lighter)
-wolf cdi with 2 maps
-38 mm air strike carb
-07 air boot/ air box setup for more airflow
Last spring every bearing and seal was replaced with new oem ones and the 07 crank was installed.
At the end of summer a new piston and clutch were installed and the suspension was rebuilt with all oem parts.
Suspension
-showa twin chamber forks and shock from a 03 cr250
-ride engineering one piece bar mount
Spares and extras up for grabs
-fmf turbine core pipe
-needles
-oem cdi
-oem radiators
-seat
-wash cover
-skid spate
-front wheel
-rear hub
-front and rear sprockets
-fork springs .43 and .45
-oem head
-rings
-and probably more stuff I’m missing
Bike has been maintained to a tee. Oil changed and air filter cleaned after every ride. Bearings have always been greased after about 20 hours of riding and are tight.
Asking 2600 if your interested call or text 864-4three4-thee757 bike comes with a lot of spares and extras listed below for an extra cost
Motor:
-96 hpp cylinder for better pv design
-Phat head racing head with removable domes (comes with 2 domes)
-Hinson basket
-07 oem crank (lighter)
-wolf cdi with 2 maps
-38 mm air strike carb
-07 air boot/ air box setup for more airflow
Last spring every bearing and seal was replaced with new oem ones and the 07 crank was installed.
At the end of summer a new piston and clutch were installed and the suspension was rebuilt with all oem parts.
Suspension
-showa twin chamber forks and shock from a 03 cr250
-ride engineering one piece bar mount
Spares and extras up for grabs
-fmf turbine core pipe
-needles
-oem cdi
-oem radiators
-seat
-wash cover
-skid spate
-front wheel
-rear hub
-front and rear sprockets
-fork springs .43 and .45
-oem head
-rings
-and probably more stuff I’m missing
GLWS
The Shop
Post a reply to: 2002 cr125 need gone