Suzuki RME 250 buil (street legal) Finish photos

Related:
Create New Tag

1/28/2019 12:56 PM

Hi mates!
Recently i sold my 2008 Rm 250 for 2200€ to one friend and i started to looking for a enduro dirtbike...
i saw a RME 250 for 2700€ and send a message to the seller asking the final price.
He answer me that he could sell for a minimun of 2500€ and i came to see it.
i saw the bike and runs well but it was very dirty and some bolts are mising or diferent than stock...
i ofered him 2400€ and he accepted. he gave me everething to run on the street and for my surprise the bike has the piston that comes with the bike when you bought new smile

Today i started to disamble the bike and start a full rebuild. my plan is to do:

-plastics and graphics
-replace every bearing
-put the new piston and crankshaft bearins
-new transmission kit
-new tyres
-new brakes
-new foam seat and cover
-new spokes maybe
-paint chasis

My previous bike:

[LINK TO IMAGE]


Suzuki RME250:

[LINK TO IMAGE]

[LINK TO IMAGE]

Photo

Photo

Photo

Photo


Photo


I will update soon and more detailed pictures.

|

1/29/2019 7:31 PM

I really enjoy European Enduroised Japanese bikes and just Euro market bikes...this bike is cool Cesar.

|

vomiting equals disqualification.

1/30/2019 2:33 PM

Thanks!

More work i done today.
This weekend im going to start to cleaning parts.
The swingarm bearings are in very good condition and i use cleaning and greasing.

Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo

|

2/2/2019 5:59 AM

Some cleaning work
I think its almost done, need a bit more in some areas but very good.
I cleaned it with a rim cleaner and its works pretty well.

Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo

|

2/5/2019 1:57 PM

Today i opened the motor and all was good. Motor has paint marks from factory, never open...
i ordered the crankshaft bearings and gasket set today.
Tomorrow im going to start clean the motor and parts... more updates to come

Photo
Photo
Photo
Photo
Photo
Photo

|

2/5/2019 6:54 PM

Looking forward to seeing more of this Cesar, enjoying the build.

|

vomiting equals disqualification.

2/18/2019 12:00 PM

More work i done... i rebuild the motor and clean some parts.
I started to remove the casting marks of the linkiage and fork clamps and i think that i go in a good way.

Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo

|

2/18/2019 7:23 PM

Looking great so far! Can't wait to see the final result.

|

2/25/2019 12:10 PM

I keep working slowly because im busy getting my motorbike driving license and waiting for the frame and some parts from powder coating.
The other day i had some problems with the chasis vin number. It had some number almost gone with sand blasting but fortunately i found very fast the way to rewrite vin numbers.
I askes suzuki a document to identify my bike with the motor number and suzuki spain send me the document very fast.

Work i done pst days

Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo

|

3/3/2019 11:47 AM

Last friday my frame cameback from powder coating and i started to build it.
I made a good progress and it started to look like a bike.
Hope you like it!

Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo

|

3/7/2019 1:28 PM

Im close to finish the bike other than plastics and rebuild my wheels.
Today i started the bike and everething works correct.
Im waiting the rm restyle kit from polisport to buy it.
Im going to remove the paint from de exhaust and repair it too.
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo

|

4/23/2020 5:04 AM

Sometime ago i finished the bike a rode it a bit before covid 19...
here its the process to the finish

I design custom graphics but i dont know where print it in good quality for a mx bike and finally i bought a oem shroud graphics.


Photo

Photo

The bike has pretty much all new, i put in it an exc headlight that looks so good in my opinion and the bike looks pretty clean and simple.

Maybe in the future i rebuild it and add rims and complete exhaust...

Photos:


Photo


Photo








Photo

Photo
Photo

Photo

Photo
Photo


Photo

Photo

Photo


Photo

Photo


This is the bike ready to the tecnic inspection; after the inspection i unistall passenger pegs, turn indicators and some parts.

Photo

Photo

Photo

Photo


Hope you like it and soon i post more detailed photos
|

4/23/2020 11:48 PM

Looks good! You decided not to go with the re-style plastics?

|

4/24/2020 7:12 AM

Factory graphics?? Please tell me more about these. Bike looks great!

|

4/24/2020 7:19 AM

kieran_macca wrote:

Looks good! You decided not to go with the re-style plastics?

Maybe in the future, for now the budget is thigh and it cost to much

Btoz it isnt factory graphics... its a replica of oem graphics...

|

4/24/2020 8:31 PM

That is quite a cool build.. must be a lot of fun, I had a 1990 Honda CR250M and 1994 Suzuki RMX250 street legal models that were only sold in Japan. They were a lot of fun wheeling down the street on the way to work or convenience store.

|