Posts
4260
Joined
8/7/2010
Location
Temple City, CA
US
Ok everyone, I need some advice my bike is almost 20yrs old. The 4 main things i would like to get my hands on are
1. New frame
2. New subframe
3. New Swing arm
4. Gold Triple Clamps
So far, ive been able to locate fuckall lol.
The reason for the frames is that i actually broke a footpeg mount off and had it re-welded and the frame is showing even more stress marks and such.
Brp has the triple clamps, but they're black, I can live with this is guess.
any help locating any of this will be greatly appreciated
1. New frame
2. New subframe
3. New Swing arm
4. Gold Triple Clamps
So far, ive been able to locate fuckall lol.
The reason for the frames is that i actually broke a footpeg mount off and had it re-welded and the frame is showing even more stress marks and such.
Brp has the triple clamps, but they're black, I can live with this is guess.
any help locating any of this will be greatly appreciated
To make it fit you have to bend upward the lower right side not much but some. To bring it to the mounting point on the frame. The upper mount holes need to be oblonged clearanced to fit the upper bolt through. The yz250f seat fits on no problem. Pipe mounts would need to be changed.
You would need 96 - 01 yz125/250 parts
Subframe
Airbox
Rear fender
Side number plates
I believe airboot as well
Post a reply to: Rebuilding My 01 Yz250f