Welcome to my first build forum, dont expect many long explanations or brand new parts! The goal is to build a display bike for my company without breaking the bank. Im starting out with nothing but a 03 cr250 frame and a shop full of parts iv collected over the years of owning hondas.
first off the frame was powdercoated by tim at Willamette powderfab in tagent oregon
i stripped down a blown up 03 motor iv had in the back of the shop for years, installed a new top end and ceraked everything. titanium nuts and bolts where all ordered directly from china.
i had a set of early model crf forks laying around that had a couple cracks in the hard anno. since theyre no longer structurally sound i figured they would be perfect to cerakote and use for a show bike. i bolted them into a set of black powdercoated 05 cr250 triple clamps off one of my other bikes
i cerakoted the straightest oem radiators i had then installed them, the forks, and a black 02 swingarm i had on a different bike
some more Chinese titanium
when logos just dont match your color scheme.. good thing i have a vinyl printer
the yellow spring wasnt cutting it and powdercoating 1 part wasnt really practical so i did the unthinkable and used spray paint on a motorcycle. i also stole a set of wheels off one of my other CRs.