07 yz125 build

jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337
Edited Date/Time 2/20/2019 8:09pm
Alright so back in January i got hold of an 07 yz125 for 1500 bucks, and what was supposed to be a beater bike has gotten quite out of hand.
Will add more as i go but got some eye candy for you all!
Heres the bike as i found it:


5
|
jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 11/17/2018 3:08am
11/17/2018 3:08am
After a thorough wash the teardown started


Calipers/ master cylinders ready for cerakote

Add a restyle kit and a set of bearings, and the bike was supposed to be a done...

jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 11/18/2018 2:04am
11/18/2018 2:04am
Bike has been completely torn down, and attacked the frame with some scotch brite and aluminum cleaner


Got the forks and applied racing triple clamps fitted, and finished off with some ti bolts for good measure


4
DerickYZ
Profile picture for user DerickYZ
Posts
541
Joined
6/15/2014
Location
Salamanca, NY US
DerickYZ 11/18/2018 11:20am
11/18/2018 11:20am
How much did the forks cost you? Following

The Shop

See All »
jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 11/18/2018 11:36am
11/18/2018 11:36am
DerickYZ wrote:
How much did the forks cost you? Following
Got them for 2500 aud thanks to a sweet deal from a mate on here
Zesiger 112
Profile picture for user Zesiger 112
Posts
2199
Joined
3/4/2013
Location
Pink Hill, NC US
Fantasy
2058th
Zesiger 112 11/20/2018 6:12pm
11/20/2018 6:12pm
Nice! Don't feel bad, hard to resist the urge to build a nice yz.
jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 11/20/2018 6:49pm
11/20/2018 6:49pm
Zesiger 112 wrote:
Nice! Don't feel bad, hard to resist the urge to build a nice yz.
Thanks mate! Its gone a lot further I've just got to update it all
jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 11/20/2018 7:05pm
11/20/2018 7:05pm
So i got the calipers and master cylinders back from cerakote, found some titanium slides and a lightspeed carbon guard, and goodridge lines aswell



jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 11/20/2018 7:45pm
11/20/2018 7:45pm
Kashima on the shock body came out awesome, and had a box full or parts from technical touch show up for it - heres a few of the nicer bits





Had some more titanium show up from docwob aswell, starting to get somewhere...





3
jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 11/24/2018 10:06pm
11/24/2018 10:06pm
Have been buying more and more bits for this thing, slowly making progress




1
jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 11/24/2018 10:31pm
11/24/2018 10:31pm
Got more and more Ti showing up, and had a blow out on these bad boys too

And whats a 125 without some carbon. Got hold of a cmt compositi tank for it, and finished it off with some titanium bolts from docwob






8
calcoast
Profile picture for user calcoast
Posts
498
Joined
10/11/2016
Location
Elk Grove, CA US
calcoast 11/24/2018 10:51pm
11/24/2018 10:51pm
Sick dude! Cant wait to see what you post next
4
jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 1/21/2019 1:56pm
1/21/2019 1:56pm
Sorry for the lack of updates, have been sidetracked lately.
Anyways, got the rest of the shock parts cerakoted black and have built the shock, man it came out sweet i think





3
jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 1/21/2019 3:19pm
1/21/2019 3:19pm
Got the xtrigs mounted up, and some more ti bits here and there, slowly making progress


5
nch209
Profile picture for user nch209
Posts
420
Joined
1/1/2017
Location
NoVa, VA US
nch209 1/22/2019 1:20am
1/22/2019 1:20am
Not sure how I missed this build... holy cow.... super clean and tasteful! Keep up the good work!
1
slamdmini
Profile picture for user slamdmini
Posts
105
Joined
9/3/2006
Location
CA US
slamdmini 1/22/2019 6:36am
1/22/2019 6:36am
this thing is gonna be sweet. did u get rid of the sight window on the master cylinder before cerakote?
Sc2
Profile picture for user Sc2
Posts
243
Joined
6/4/2018
Location
GB
Sc2 1/22/2019 12:09pm
1/22/2019 12:09pm
Looking sweet mate, out of interest is the tank carbon wrap, did u do it yourself

Pit Row

See All »
jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 1/23/2019 12:50am
1/23/2019 12:50am
slamdmini wrote:
this thing is gonna be sweet. did u get rid of the sight window on the master cylinder before cerakote?
I didn't mate, but its been bothering me not done so i may get the shits with it and do it yet haha
jacko337
Profile picture for user jacko337
Posts
87
Joined
1/20/2018
Location
Mackay QLD AU
jacko337 1/23/2019 12:52am
1/23/2019 12:52am
Sc2 wrote:
Looking sweet mate, out of interest is the tank carbon wrap, did u do it yourself
No mate its not wrap, its actually a cmt compositi carbon tank, they make them for a fair few different models
1
PJRAUS
Profile picture for user PJRAUS
Posts
1532
Joined
5/28/2016
Location
AU
PJRAUS 1/28/2019 3:28am
1/28/2019 3:28am
This thing is starting to look awesome...great work mate!
Spagina767
Profile picture for user Spagina767
Posts
912
Joined
8/27/2013
Location
Fredericksburg, VA US
Spagina767 2/20/2019 8:09pm
2/20/2019 8:09pm
GeorgiePorgie wrote:
Currently have an erection.
As long as it is gone in 4 hours, you're good. I know, because I had to look it up after look at this post, too.

Post a reply to: 07 yz125 build