Honda Triplets build

Dillpickle312
Edited Date/Time 9/20/2018 3:32pm
We start with a worn torn 02 250. A used and abused 04 125 and a season of C class battled 17 450. Well herrr we go! My vision for these builds is try and keep most of the parts, colors, graphics and brands somewhat the same. this will be a slow and (for me) pricy build so settle down and buckle up.
|
Dillpickle312 3/25/2018 3:37pm
3/25/2018 3:37pm
Up first is a 2004 CR125r I bought for 700$ with some parts already put on but will come off for another frame off cleaning getting ready for a fresh engine.









Dillpickle312 3/25/2018 3:40pm
3/25/2018 3:40pm
Next is a battle beaten 2002 CR250 that I bought for 900$ and was supposed to be my one and only bike after I broke my back in 2013. I did a good build on it and rode it to death over the next 3 years. When the 2017 season came. I had a Choice to rebuild the CR 250 or to bite the bullet and grab a 2017 crf450 obviously in the Eyes of the two stroke cult...I sinned.
Dillpickle312 3/25/2018 3:42pm
3/25/2018 3:42pm
Dillpickle312 wrote:
Next is a battle beaten 2002 CR250 that I bought for 900$ and was supposed to be my one and only bike after I broke my...
Next is a battle beaten 2002 CR250 that I bought for 900$ and was supposed to be my one and only bike after I broke my back in 2013. I did a good build on it and rode it to death over the next 3 years. When the 2017 season came. I had a Choice to rebuild the CR 250 or to bite the bullet and grab a 2017 crf450 obviously in the Eyes of the two stroke cult...I sinned.












Dillpickle312 3/25/2018 3:46pm
3/25/2018 3:46pm
And last but not least is the best bike I’ve ever owned and ever ridden. 2017 crf450r. It already has a yoshi system while the 2 pokers will stay with Pro circuit. Bike is apart at the moment for some fresh suspension that can hold up to my fat ass.

The Shop

See All »
Dillpickle312 3/26/2018 5:11pm
3/26/2018 5:11pm
Here’s the color scheme for the 3 bikes except with black fork guards. And obviously new seat covers.

Jrewing
Profile picture for user Jrewing
Posts
2865
Joined
1/4/2014
Location
AU
Jrewing 3/27/2018 2:22am
3/27/2018 2:22am
That's exactly what I'm doing on my 99 cr125. Bad ass
Dillpickle312 5/9/2018 8:26pm
5/9/2018 8:26pm
I’ve gotten a bit farther on a couple of the bikes all have new plastics waiting for graphics that are on order. The crf got some new black d.i.d. Rims for her. And the cr250 engine is done!
Dillpickle312 6/7/2018 12:39pm
6/7/2018 12:39pm
Got the crf completely torn apart. Man after years of working on 2 strokes and my last 4 stroke being an 06 crf450 this 17 has more wiring harnesses and plugs than i know what to do with!! But got the frame clean and the engine a little shined up. Also got my graphics for all three bikes! One of my best friends cody definitely got the hook up for me


H4L
Profile picture for user H4L
Posts
2499
Joined
3/18/2016
Location
CA US
H4L 6/9/2018 7:08am
6/9/2018 7:08am
Wow ! Doing 1 bike build is a project I couldn't imagine doing 3 at a time. Looking forward to the outcome of the triplets..
Dillpickle312 6/10/2018 6:11pm
6/10/2018 6:11pm
Well the 450 is about 95% done just need a few bling pieces and my sprocket and chain to come in the mail



Mx746
Profile picture for user Mx746
Posts
533
Joined
11/30/2010
Location
Marietta, GA US
Mx746 6/11/2018 5:52am
6/11/2018 5:52am
some good work going here, enjoying the thread.
GregDVT
Profile picture for user GregDVT
Posts
703
Joined
3/23/2016
Location
Phoenix, MD US
GregDVT 6/11/2018 4:08pm
6/11/2018 4:08pm
Holy smokes that is a lot of parts to keep track of at once!

I noticed that Hoosier MX tire in the background, have you gotten to try one yet?
Dillpickle312 6/11/2018 7:24pm
6/11/2018 7:24pm
GregDVT wrote:
Holy smokes that is a lot of parts to keep track of at once! I noticed that Hoosier MX tire in the background, have you gotten...
Holy smokes that is a lot of parts to keep track of at once!

I noticed that Hoosier MX tire in the background, have you gotten to try one yet?
Not yet hopefully Thursday I don’t expect it to last too long from what I’ve heard but still cool!
Dillpickle312 7/5/2018 7:01pm
7/5/2018 7:01pm
Keep getting a little farther on the 250 should be running soon. Just procrastinating on de-lacing the wheels stripping the powdercoat off the hubs and re powdercoating them, then building the wheels again:/


1
Dillpickle312 9/5/2018 9:13am
9/5/2018 9:13am
Well the cr250 is just about done will still need some tuning but very happy with how it looks!


4
mwssquad827
Profile picture for user mwssquad827
Posts
1463
Joined
8/4/2016
Location
Twin Falls, ID US
mwssquad827 9/19/2018 7:20pm
9/19/2018 7:20pm
Your brake perch smiley face is cool!!! How did ya make it drill and dremel?

Pit Row

See All »
Helda
Profile picture for user Helda
Posts
690
Joined
9/17/2018
Location
AU
Helda 9/20/2018 3:32pm
9/20/2018 3:32pm
3 bikes at one....you must hava a very understanding wife Tongue
1

Post a reply to: Honda Triplets build