Posts: 16
Joined: 11/21/2013
Location: ITA
I have a problem to find a right exhaust to fit with a motor HPP 1995 that I installed on a frame 2002
This photo is the original exhaust 2002.
I need some advice, the 2002 discharge should be changed only near joint/pipe, but then the bike should not be very forward, the best thing would fit an exhaust with the belly, 98-99 at maximum 2000-2001
Posts: 3583
Joined: 3/11/2015
Location: Santa Fe, TX USA
Posts: 16
Joined: 11/21/2013
Location: ITA
Posts: 3583
Joined: 3/11/2015
Location: Santa Fe, TX USA
Edited Date/Time:
Ok so if you know then why ask? There is no pipe that mounts on there to fit exact. All must be modified. Good luck there is plenty of information on this site. Just search for it.
Posts: 267
Joined: 2/16/2014
Location: Liberty, MO USA
Go to this thread you can see how I did my 95 t0 02 swap using 02 fmf pipe easy to do
http://www.vitalmx.com/forums/Moto-Related,20/2003-CR125-1998-CR125-engine,1286841
Posts: 267
Joined: 2/16/2014
Location: Liberty, MO USA
hang the pipe on the exhaust flange. cut it almost thru. bend pipe and mount rear hanger, tack pipe the weld up and finish Last picture is counter sunk bolts in power valve covers to clear water hose.
Posts: 16
Joined: 11/21/2013
Location: ITA
jerry atrick moto wrote:Go to this thread you can see how I did my 95 t0 02 swap using 02 fmf pipe easy to do
...more
Thx
Posts: 16
Joined: 11/21/2013
Location: ITA
