Just got done building this Cr500af. It's a 2004 crf250 with 01 cr500 motor. What you guys think? 
|
Quote
Cr500Af
Posts: 84
Joined: 8/30/2017
Location: Canyon Country, CA USA
Posts: 3606
Joined: 1/28/2010
Location: TN, USA
Posts: 84
Joined: 8/30/2017
Location: Canyon Country, CA USA
None at all friend if mine did all the fab work on it and everthing fits perfectly. Only thing I noticed is I also have a 01 cr500 steel frame and this one with aluminum frame vibrates way more than the steel frame.
|
Quote
Posts: 101
Joined: 4/3/2017
Location: Peoria, IL USA
Posts: 1603
Joined: 1/29/2015
Location: GBR
Posts: 197
Joined: 2/24/2017
Location: Venado Tuerto, ARG
Posts: 84
Joined: 8/30/2017
Location: Canyon Country, CA USA
Thanks guys pumped on it got few more things goibg to do to it I'll post pics wjen finally done
|
Quote
Posts: 16
Joined: 8/30/2017
Location: IRL
Posts: 2823
Joined: 8/3/2016
Location: CA, USA
That's so sweet looking. I'll have to get a 500 two stroke one of these days.
|
Quote
Instagram: vanillaice782
Amateur helmet painter
Posts: 84
Joined: 8/30/2017
Location: Canyon Country, CA USA
Didn't expect that on my second ride on bike so back to the drawing board new frame new fabricator got all the faith in him going to hold this time.
|
Quote
Posts: 8
Joined: 10/13/2017
Location: Centerville, UT USA
Wow dude, you're lucky you saw that before breaking yourself off!
I thought your bike was sick when you posted it, hope you can get it fixed up soon.
|
Quote
Posts: 84
Joined: 8/30/2017
Location: Canyon Country, CA USA
Edited Date/Time:
Yeah I landed iff jump and felt front end flex away then come back then a,loud rattle. I pulled off and saw that and called it a day. Next one were doing it should be strong as hell I'll post pics when done. This mean machine will ride again soon!
|
Quote
Posts: 1972
Joined: 9/14/2006
Location: NJ, USA
Posts: 55
Joined: 10/14/2016
Location: ZAF
Posts: 925
Joined: 9/7/2012
Location: MA, USA
smithers57 wrote:
Yeah I landed iff jump and felt front end flex away then come back then a,loud rattle. I pulled off and saw that and called it a day. Next one were doing it should be strong as hell I'll post pics when done. This mean machine will ride again soon!
Instead of a straight weld across, I've seen people do it at an angle to get more "surface area" in the weld.
|
Quote
If you're not mixing gas, you're not haulin ass.
The Latest
Most Popular
- @cache_main: 8df2c64e011179d764b1c6ace7e6f39d
