94 CR250 restoration

Related:
Create New Tag

3/28/2018 6:45 AM

I have a 94 CR250 and I’ve been doing research to find parts. I want to do a McGrath throwback bike but having trouble finding parts. Any suggestions would be much appreciated

|

3/28/2018 11:16 AM

What kind of parts are you looking for?

|

3/28/2018 11:38 AM

Plenty of parts to be had. Are you looking for NOS plastics and such?? Even though can be found with enough digging.. won't be cheap but they're out there. I have a '96 McGrath replica

|

Positively, absolutely 110% obsessed with anything MOTO.

3/28/2018 1:03 PM

i've reached out to bills pipe and pro circuit about exhaust and pro circuit is the only that has responded. my seat cover is busted and the foam could be replaced. I am pretty sure the engine has never been built and it has very good compression. It has the factory pipe and silencer on it. I would like to replace the front number plate rear and front fender. the side panels and tank and shrouds are still good. i have found a local shop to powder coat the frame and i have spoke to a suspension shop today that is gonna go through the suspension. other than that i just need plastics and bearings. just having a difficult time finding a oem plastic kit

|

3/28/2018 4:04 PM

Ufo (tuf racing) has the closest to oem colour for 1994 models. Just make sure you specify what year you want because each year for 92 on honda changed the colour.

|

3/28/2018 5:48 PM

Almost impossible to find nos oem plastic! Ufo plastic with the part # ending with 067 is the closest to oem red. clarkemfg.com for stock capacity fuel tank. For the correct color seat cover Evo-mx.com and they have the correct decals. For seat foam Guts racing.

|