Posts
825
Joined
11/2/2014
Location
Aspen, CO
US
Fantasy
1425th
smv ryder
5/14/2021 4:40pm
5/14/2021 4:40pm
Edited Date/Time
1/20/2023 11:36am
Over the last couple months I have been building up my FX350, not a lot of FX builds out there so why not post it up. I ride the western slope of Colorado desert, Moab area, and all the single track around Aspen. The scope of the build is an off road race bike, single track slayer and still be able to rip the track. Here is the day I got her and next to my 2015 FC 350.
I also experimented with the KTM front end plastics. Nah
Excited to see what you come up with, your old 350 was uber trick!
I came up with something pretty trick! 🤦🏼♂️
The Shop
Titanium pro pegs, P3 carbon fiber ignition wire cover, Nihilo case guard, complete guts phantom seat, dirt tricks front sprocket washer, ARC memlon front brake/clutch lever and more titanium bolts.
1. Acerbis white flag hand guards
2. Acerbis skid plate
3. Acerbis White lower side number plates
4. Acerbis Vented side plate
5. Acerbis white KTM front number plate/also fresh Husky
6. Acerbis white KTM front fender
7. Novik grip doughnuts
8. CV4 2.0 radiator cap
9. Clean speed Brake lever tip replacement
10. Radiator fan
11. Acerbis white radiator louvers
12. Emig grips
13. Titanium bolts/bits: 172 if I counted correctly
Front brake disk (6), front rim lock, fork guards (6), FI light, front number plate, (4) front fender, triple clamps (8), center bolt on triple clamps, clutch lever, brake lever, throttle tube (2), shift lever, exhaust (2), seat, rear rim lock, rear disk (6), axle adjustment bolts/nuts (4), handle bar bolts (4), chain guide (2), mud flap bolts (2), under seat shroud bolts (2), front sprocket bolt, fork guard brake line guide bolts (2), brake lever tip bolts (2), exhaust mid bolt,shock bolts (2), Titanium Rear Brake pedal bolt and nut (2), Titanium Front Axle and Steering Stem Cap Set (2), Titanium Engine Fastener Kit (39 pieces), oil cap, radiator guards (8 total), rear sprocket/6 locking rear nuts (12), (2) titanium foot peg pins, rear fender (3), motor mounts from motostuff (2), (2) screws that attach rear fender to subframe, (4)screws under seat that attach shrouds to gas tank, brake line holder screw behind front plate, (4) titanium screws for the clutch and brake reservoirs, (6) engine head mounts, (2)frame guards, (2) under fender subframe, (2) lower subframe, (1) chain guide, (2) linkage/swing arm, (2) brake banjo bolts, CRF Rear axle nut, (2) rim lock main bolt, rear brake piston, rear brake master cylinder (2), magnetic oil plug, kickstand foot bolt,
14. Ktech fork inserts
15. Motovate racing fork revlave and Ktech spring
16. CSR racing rear shock spring
17. Pro Circuit full linkage
18. 13 tooth sprocket
19. No toil 2 stroke air filter cage
20. ARC memlon brake lever
21. ARC memlon clutch lever
22. Motostuff 280 mm front disk
23. Aluminum front brake caliper bolts
24. Motostuff lite rear disk
25. Rekluse clutch slave cylinder
26. Showa rear shock valve instead of RT gold valve
27. Motovate racing rear shock re valve
28. Nihilo black case saver
29. Pro peg titanium foot pegs
30. Nihilo rear axle nut
31. P3 CARBON IGNITION WIRE COVER
32. Neken SFS top triple clamp
33. Hinson Bullet proof clutch cover
34. Luxon R works 36 fat bar mount
35. Renthal R works 36 fat handle bar
36. Boyeseen black supercooler water pump
37. Guts Tall seat
38. Black dirt tricks front counter sprocket
39. Racetech rear shock bladder kit in black
40. Ride engineering CRF axle and axle block kit
41. SLF carbon fiber magura clutch and brake top caps
42. Blais Ecu reflash
43. TM design chain guide
44. Renthal 51 tooth rear sprocket
45. Primary drive Gold z-chain
46. Technical touch KYB fork kit
47. Hammerhead +10mm shift lever
48. TM Design chain slider
49. Free flo gas cap hose
50. Full pro circuit T-6 exhaust
51. Warp9 pro rim locks
52. BikeGraphix numbers
53. Guts white seat cover
54. CMT COMPOSTI Carbon fiber engine mounts
55. Warp9 black kick stand
56. Rekluse torqdrive clutch pack
The waveblaster is going to be neat as heck. Just like dirt bikes the jet ski market is out of control on what people are asking for them. I had to drive to Utah to get that gem at a fair price and it came with the very important “factory B pipe”. My wife has a pretty tricked out Kawasaki JS 550 but I am just too darn big for it sometimes.
Pit Row
Also, what brake tip is that? Looks nice and long. I hate how my 17 brake lever sits so tucked inside. Makes it awkward for my position.
Sweet bike man, I have a 350XCF I started a build page for but have since fallen short of updates lol
What did you do the stock shock? Or just ran it? The traxx has got to be a huge upgrade.
I am very happy with my stock shock, Showa valve, PC full linkage, CSR spring for my weight and the Motovate racing revalve she is dang good for me.
I should have bought the Warp9 titanium spokes when I had the chance.. I can’t find them anywhere.
How often do you make it the western slope to ride? Let me know the next time and we will try to get a ride in.
It’s a clean speed extended brake tip. I tried to run the titanium brake tip from Motostuff but I felt one crash the tip would go through the case. So I kept searching and Rocky Mtn atv carried the clean speed one and it works f’ing awesome!!
https://www.rockymountainatvmc.com/parts/clean-speed-extended-brake-ped…
Thank you! Let’s see that XCF!
Post a reply to: 2020 Husqvarna FX 350… Finally finished 🤙🏻