Posts
6
Joined
9/21/2017
Location
FI
Edited Date/Time
5/16/2018 1:13pm
Hola!
It´s been done few years back but now i feel i have the courage to post some pics!
Bike build starts when the firts gearbox broke in 2016 i was only drive it no more than 12 hours. Now theres all ready third gearbox in place and those are the latest part number gear´s, With 450 sxf DDS clutch which is rubber dampered, it has been hold very good (finger´s crossed). Bike total hours are now 56. I have changed piston,cam chain,bearings etc. one time. There is a vortex ECU, Some small head work, Pro circuit T(i)6 pipe ( Euro version), it´s only has titanium muffler other pipe parts are stainless.
As for the suspension it´s almost stock. TTM Factory here in Finland make me some shimming and other magic for the forks (AER48) and also for the rear shock. Rear shock has a mx-tech compression adjuster.
Plastics are acerbics flo orange and black mixed together, all the airbox plastics are OEM black from EXC models. Seat cover are D´COR black with orange stripes and taller foam from black bird. Number plate graphics are made by BikeGraphix.
Handle bars are stock with lower block, about 5mm. Gray ODI grips.
I only drive motocross races in hobby class but i´m really interested bike tech as much i like to race, so watcword "we race sometimes" suits for
me 
really like to have some fun at the track i dont really care is it race or just fun day for practicing!!!
Every one keep safe!
It´s been done few years back but now i feel i have the courage to post some pics!
Bike build starts when the firts gearbox broke in 2016 i was only drive it no more than 12 hours. Now theres all ready third gearbox in place and those are the latest part number gear´s, With 450 sxf DDS clutch which is rubber dampered, it has been hold very good (finger´s crossed). Bike total hours are now 56. I have changed piston,cam chain,bearings etc. one time. There is a vortex ECU, Some small head work, Pro circuit T(i)6 pipe ( Euro version), it´s only has titanium muffler other pipe parts are stainless.
As for the suspension it´s almost stock. TTM Factory here in Finland make me some shimming and other magic for the forks (AER48) and also for the rear shock. Rear shock has a mx-tech compression adjuster.
Plastics are acerbics flo orange and black mixed together, all the airbox plastics are OEM black from EXC models. Seat cover are D´COR black with orange stripes and taller foam from black bird. Number plate graphics are made by BikeGraphix.
Handle bars are stock with lower block, about 5mm. Gray ODI grips.
I only drive motocross races in hobby class but i´m really interested bike tech as much i like to race, so watcword "we race sometimes" suits for
me
really like to have some fun at the track i dont really care is it race or just fun day for practicing!!!Every one keep safe!
Post a reply to: 2016 KTM SXF 250 EU