2006 kx250 conversion

jhicks187
Profile picture for user jhicks187
Posts
3
Joined
6/29/2018
Location
Zebulon, NC US
jhicks187
I have a quick question, I'm building an 06 kx250 and I bought warp 9 rims for it what size spacers do I need to use for the front rim to bolt it up to the forks? I tried using 450 spacers and then it makes the axle bolt to short. Im not sure what else to try. Any advice will be greatly apprectatied!
|
ItsJuniorJ
Profile picture for user ItsJuniorJ
Posts
19
Joined
9/19/2017
Location
Dubai AE
ItsJuniorJ 7/4/2020 6:27am
7/4/2020 6:27am
Warp9 should have sent you their spacers, which match their hubs. Drop them an email to check. I’ve bought 6 sets of wheels from them, for multiple bikes, and they always come with everything you need to “bolt on” and ride.
1
HondaMan66
Profile picture for user HondaMan66
Posts
112
Joined
1/6/2020
Location
Atlanta, GA US
HondaMan66 7/6/2020 9:55am
7/6/2020 9:55am
I’d say if your axle is too short it’s not gonna matter what spacers you use.
soggy
Profile picture for user soggy
Posts
4882
Joined
12/3/2018
Location
UT US
Fantasy
3846th
soggy 7/7/2020 5:27am
7/7/2020 5:27am
jhicks187 wrote:
I have a quick question, I'm building an 06 kx250 and I bought warp 9 rims for it what size spacers do I need to use...
I have a quick question, I'm building an 06 kx250 and I bought warp 9 rims for it what size spacers do I need to use for the front rim to bolt it up to the forks? I tried using 450 spacers and then it makes the axle bolt to short. Im not sure what else to try. Any advice will be greatly apprectatied!
What forks are you running?

Post a reply to: 2006 kx250 conversion