2002 CR250 Restoration Build

Related:
Create New Tag

7/20/2018 12:01 PM
Edited Date/Time: 7/20/2018 1:45 PM

Alright Guys.... I traded this 2001 CR 250 that I completely restored from the frame up.... I traded it for a 2002 CR250 that needed an extreme amount of work to be ready to ride...
I wanted the better forks, handling, and a narrower bike. Also for it to look updated.
Photo It was nice, but it was time for it to go. On to the 2002...........

Here's the Bike I traded for... Quite the downgrade but I was determined to rebuild it like my 01. Photo
It needed lots of love. It had an FMF Gnarly pipe brand new and a 304 shorty... thing made absolutely no power for a race track. It wouldn't rev out at all.... Gnarly pipes are made for woods only. Not racers.
Photo

Here's my build List/What I have done to it since it looked stock
-OEM Crank and Top End Rebuild
-Every Bearing on Bike was Replaced
-ProTaper EVO Fat Bars
-Excel A60's on stock PC'd hubs
-Radiator Hoses
-Tag Triple Clamps
-MX 32's
-TCD Re-Valve/Re-Spring .49 front springs / 5.8 FC rear spring / lots of worn parts within suspension aka Heavy Bill from TCD lol
-New FlyRacing Billet Killswitch
-GPI Radiator Hoses
-New Clutch Plates
-EBC Brake Pads
-Moose Shifter
-Fastway Footpegs CRF PEGS - Fabbed up to fit CR
- Motion Pro Throttle / Clutch Cable
-CRF Cycra Skid Plate - Fabbed to Fit CR - had to Cut room for the pipe with a hot box blade
-Pro Taper Pillow top Grips
-FMF Fatty / Shorty Combo
-Black Cycra Mud Flap
-2016 Cycra Front Plate and Fender
-Cycra Front Rotor Guard
-New Brake Fluid
-Twin Air Filters
-Twin Air Wash Cover
-New ProTaper Gold Chain
-New 50t supersprox steel sprocket
-New 14 ProTaper Fromt Sprocket
-New Chain Guides
-Topar Racing Billet Chain Guard
-New Vforce3 Reeds
-MX BONZ Billet Air Filter Seal Kit (MUST HAVE!!!)
-New Motoseat Cover
-Works Connection Clutch Perch and Lever
-ASV Front Brake Lever
-Works Connection Tank Bracket & Hour Meter
-Yellow FreeFlow Carb Vent Tubes/Gas Tank Vent
-Powdercoated Flat Black WaterPump Cover/Front Brake Resevoir Cover/Front Brake Line Clamps/Power valve cover.

See the Video of this Here (Video is of before it was complete)

&t=3s

Sound Bit Swap of FMF Exhaust When I First got it.
&t=1s

Front Fender, Number Plate Conversion


MX BONZ - Air Box Kit - ENGINE SAVER


Pipe Concern Video - Turns out a lot of stock CR's have this problem with FMF's
&t=27s

If you like my videos please subscribe to my youtube channel






NOW TO THE GOOD STUFF
....Here are the pics from the day I sold the bike (Sad Day)
Photo

Photo
See Fitment of Skid Plate Where I Cut out on left side
Photo

Photo

Photo

Photo

Photo

Photo

Photo

Photo

Photo

Photo

Photo

Photo

Photo

Here's a photo of me before I was going out to enjoy the bike. Polka Dots MX: Midland, MI

Photo

I no longer own this bike. I sold it with 7.8 Hours on it. It was mint. I'm still in love with it, but the people that I sold it to wodded it up doing a wheelie down a gravel road the week they go it.

It will forever have a spot in my heart.

Thanks for checking it out.

If you like my videos please subscribe to my youtube channel





-ALR























|