1996 cr250r looking for parts to finish build

thatCR250guy
Posts
6
Joined
5/7/2020
Location
Phillipsburg, NJ US
5/7/2020 11:45pm Edited Date/Time 5/15/2020 9:52am
Hello everyone im new to the group but i always used to look up forums on here and always found great sources of info! Im in desperate need of parts for my bike as i finish up my build i notice the odds and ends i need and i cant do because unfortunately the parts are unavailable now Sad im looking for a rear brake pedal return spring, 2 rear axel adjuster blocks( mine are warn and damaged due to the rear axel just over the years) i am looking for radiator louvers tho i do have a few leads and whatever other parts someone may have they would like to comment. Thank you so much all i am located USA and ready and available for payments on these parts i need. Stay safe everyone
|
Action69
Posts
399
Joined
9/25/2018
Location
Howard Beach, NY US
5/8/2020 1:23pm
I should have the brake spring,I have Oem axle blocks I went with hrc replicas.im building a 94 into a 96 McGrath replica .i have other parts if needed just ask I may have.reach me here or stevekbby@gmail.com
1
TooOld4WFO
Posts
530
Joined
4/1/2018
Location
Fresno, CA US
Fantasy
1610th
5/8/2020 4:49pm
The louvers are silly easy to fit. If you find some 250 ones they will not be cheap. 125 ones are $30 per side new.

I can share two ways of modifying them. The first I found somewhere maybe even here. But both utilize the 125 ones.





I did not like the addition of the bolts and after aligning them to the radiators I could see you could do it cleaner.





4
thatCR250guy
Posts
6
Joined
5/7/2020
Location
Phillipsburg, NJ US
5/12/2020 12:13am
This is excellent news!! Thank you so much i was going to have a fabrication shop make me a custom set but this is so much cheaper and less time consuming!! This is perfect i will definitely be going this route
1

The Shop

thatCR250guy
Posts
6
Joined
5/7/2020
Location
Phillipsburg, NJ US
5/12/2020 12:30am
Would someone by any chance have a kicker assembly they are willing to part ways with (kicker and joint arm) im looking for one in very good shape mine is at the point wear it is starting to wear to much and it is slipping past the joint arm.
Thank you in advance!
nine1seven
Posts
370
Joined
9/13/2009
Location
Magnolia, TX US
5/12/2020 7:23pm
I have some 96 CR250 Lou era that are in good shape if your still looking. Let me know and I’ll dig them out.
nine1seven
Posts
370
Joined
9/13/2009
Location
Magnolia, TX US
5/12/2020 7:25pm
I also have a kickstart lever.
thatCR250guy
Posts
6
Joined
5/7/2020
Location
Phillipsburg, NJ US
5/12/2020 8:03pm
nine1seven wrote:
I have some 96 CR250 Lou era that are in good shape if your still looking. Let me know and I’ll dig them out.
Please let me know send pics and everything you can reach me @ mckeemtt@gmail.com thank you!
nine1seven
Posts
370
Joined
9/13/2009
Location
Magnolia, TX US
5/13/2020 3:55pm
I compared that kickstart lever to my bikes. That one is for a 2001 CR250R. Same motor and might work on the older steel frame since it’s the same motor.

Post a reply to: 1996 cr250r looking for parts to finish build

The Latest