04 rm125 refresh

Related:
Create New Tag

1/22/2018 5:17 PM
Edited Date/Time: 1/22/2018 11:21 PM

I rebuilt this 2004 rm125 for a friend of mine.


Full Hinson clutch
Wossner piston
V-force 2
FMF pipe
Bud racing silencer stainless carbon tip

Braking oversized front brake rotor kit
Works Connection frame guards and skidplate
Updated flo front fender and number plate
Bolt complete plastic bolt kit
Universal triple clamp
Pro taper bars and grips
Dunlop tires
Primary drive O-ring chain
Sunstar sprocket
Bike graphics kit and custom seat cover
MX bonds yellow carb hose kit
Outlaw shifter
Quick adjust perch and yellow cable
Billet fuel tank breather

Photo

Photo

Photo

Photo

Photo

Photo

After some graphics were installed. Arenacross

Photo

Photo

|

1/22/2018 6:04 PM

Good find onn the Hinson hub and pressure plate

|

1/22/2018 6:23 PM

Bruce372 wrote:

Good find onn the Hinson hub and pressure plate

He actually got lucky on the Hinson components. He purchased the bike and the previous owner had just installed the whole kit.

|

1/24/2018 4:48 PM

Nice!! Where'd you find flo yellow shrouds & tank. I just rebuilt an "05 and an '07 and was looking for flo. plates and side panels. Couldn't find them.

|

1/24/2018 4:54 PM
Edited Date/Time: 1/24/2018 4:57 PM

Ozzyrules wrote:

Nice!! Where'd you find flo yellow shrouds & tank. I just rebuilt an "05 and an '07 and was looking for flo. plates and side panels. Couldn't find them.

The side panels are OEM suzuki yellow. The front number plate and front fender is New RMZ stuff from Acerbis that I modified a bit to fit.

|

1/24/2018 5:49 PM

Aaaah, ok. It was hard to determine that in the picture's lighting. Nice job on it!

|

1/24/2018 7:27 PM

Ozzyrules wrote:

Nice!! Where'd you find flo yellow shrouds & tank. I just rebuilt an "05 and an '07 and was looking for flo. plates and side panels. Couldn't find them.

wink I might have an idea on that but I'll have to work it out first.. Nice build Suzukis4Life3.. See what I did there??laughing
|

1/24/2018 9:17 PM
Edited Date/Time: 1/24/2018 9:20 PM

ClutchLuck24/7 wrote: wink I might have an idea on that but I'll have to work it out first.. Nice build Suzukis4Life3.. See what I did there??laughing

Hahaha not the first to say something about the screen name. I ride a Honda but it seems like every bike I work on isn't a Honda.. (hmm maybe I'm onto something.) This bike had a leaky left side crank seal that eventually took out the main bearing.

|