04 cr125 snail

Dillpickle312
Edited Date/Time 10/12/2017 10:07am
My pack rat hoarding impulse buying ways got to me again. Ended up buying a 04 125 from a buddy for 700$ it came as a roller with the engine apart. Plan was to get it together for as cheap as possible for the last race at my Local track for the year...didn't happen. Oh well.
|
Dillpickle312 10/7/2017 11:27am
10/7/2017 11:27am



Here's a little before and after porn for ya of the frame cleaning. The bike came with the txr plastic kit conversion and it took everything in my power not to take it directly to the burn pile and set it ablaze. I don't know why people spend 350$ on that kit but to each his own. Ended up selling it. And out the original plastics on which I know are not too appealing to the eye in they're decrepit state but it's better than txr.
Dillpickle312 10/7/2017 11:31am
10/7/2017 11:31am
Sorry I don't have more pics of the build in progress. But as of right now it's very far from done so I figured I'd bring ya along for the rest of it
Dillpickle312 10/7/2017 11:36am
10/7/2017 11:36am
What the bike has right now:
Rg3 top clamp
New bottom end
New cast piston(will be changed to a forged soon)
New vforce 3 reeds
Newer clutch
Works connection holeshot device

What it will be getting:
Full pc exhaust
Plastics/graphics
Possible 38mm carb
Tires/rims
Suspension
Forged piston
Clutch perch
Etc.

The Shop

See All »
Dillpickle312 10/7/2017 11:38am
10/7/2017 11:38am
Road it around and coming off my 17 crf450 this bike feels like it's got the power of a dead raccoon. Any suggestions on how to make these things sing?
I'm thinking of a 38mm carb my buddy told me to get
Fly wheel weight
134 kit

Any suggestions are appreciatedSmile
Joyner41
Profile picture for user Joyner41
Posts
151
Joined
1/17/2017
Location
Rohnert Park, CA US
Fantasy
1873rd
Joyner41 10/7/2017 11:44am
10/7/2017 11:44am
At the end of the day, it will always be a dead raccoon compared to a 450! Hahaha but that is the joy of the buck and a quarters. Let her sing without the 134 kit, keep it as close to stock as possible for longevity, and just ride it!

I just went from a 38mm stock Mikuni to a 36mm Keihin for my RM. I can’t speak for the CR’s, but I know the 38’s can be a bit for the 125’s
snillum
Profile picture for user snillum
Posts
247
Joined
7/25/2017
Location
Greer, SC US
Fantasy
329th
snillum 10/7/2017 8:23pm
10/7/2017 8:23pm
What was your secret on all of the nooks and crannys in the frame? It looks excellent.
Dillpickle312 10/7/2017 8:37pm
10/7/2017 8:37pm
snillum wrote:
What was your secret on all of the nooks and crannys in the frame? It looks excellent.
Bead blasting boxWink you can do it cheaply too with a gun from harbor freight an air compressor and media.
wsc96
Profile picture for user wsc96
Posts
1013
Joined
8/26/2013
Location
AU
Fantasy
474th
wsc96 10/8/2017 1:12pm
10/8/2017 1:12pm
I like! Frame turned out great.

I guess you’re thinking 38mm PWK Airstriker for the carb? I got one for my 250 and will consider the same for my 125 when I get around to it.
wasummer46
Profile picture for user wasummer46
Posts
203
Joined
1/11/2017
Location
Raleigh, NC US
wasummer46 10/9/2017 8:12am
10/9/2017 8:12am
Yes, switch to the 38 airstriker and get an 07 airbox and airboot to help it breath. I put a cyrca high flow rear fender. Some people even drill holes in the airbox to help it breath. Its almost suffocating the carb.
Braaaphole
Profile picture for user Braaaphole
Posts
782
Joined
8/21/2016
Location
Spring, TX US
Braaaphole 10/9/2017 12:09pm
10/9/2017 12:09pm
I wish I could run across a deal like that on a 3rd gen CR125 or YZ125. Everyone I find around here people seem to think they are made of gold.
Dillpickle312 10/9/2017 12:15pm
10/9/2017 12:15pm
wasummer46 wrote:
Yes, switch to the 38 airstriker and get an 07 airbox and airboot to help it breath. I put a cyrca high flow rear fender. Some...
Yes, switch to the 38 airstriker and get an 07 airbox and airboot to help it breath. I put a cyrca high flow rear fender. Some people even drill holes in the airbox to help it breath. Its almost suffocating the carb.
That's kinda what the bike felt like when I rode it. You think an air striker? My buddy said to put a 38mm pwm on it
Dillpickle312 10/9/2017 12:18pm
10/9/2017 12:18pm
Braaaphole wrote:
I wish I could run across a deal like that on a 3rd gen CR125 or YZ125. Everyone I find around here people seem to think...
I wish I could run across a deal like that on a 3rd gen CR125 or YZ125. Everyone I find around here people seem to think they are made of gold.
Yeah I hear ya even super roached bikes people think if they put a "fresh top end in it" it automatically makes it a 1500$ bike. That's why I have so many bikes right now I just can't pass up a good deal. I have 5 older two strokes and I havnt pains over 1000 fo Any. There are deals out there just keep your eyes peeled and ask friends
tornliverluke 10/9/2017 12:26pm
10/9/2017 12:26pm
Dillpickle312 wrote:
Bead blasting boxWink you can do it cheaply too with a gun from harbor freight an air compressor and media.
Don't want to de-rail the thread but can you enlighten us as to what EXACTLY you got from HF to do your bead blasting. Ive wanted to but never ventured into bead blasting and everyone says its easy with a gun and some media but I'm not confident that id order the right stuff.
Dillpickle312 10/9/2017 3:46pm
10/9/2017 3:46pm
Dillpickle312 wrote:
Bead blasting boxWink you can do it cheaply too with a gun from harbor freight an air compressor and media.
tornliverluke wrote:
Don't want to de-rail the thread but can you enlighten us as to what EXACTLY you got from HF to do your bead blasting. Ive wanted...
Don't want to de-rail the thread but can you enlighten us as to what EXACTLY you got from HF to do your bead blasting. Ive wanted to but never ventured into bead blasting and everyone says its easy with a gun and some media but I'm not confident that id order the right stuff.
I used this one for my first frame cleaning. Its cheap and will probably break but it works. The media I use is a glass bead the higher number the grit the finer the bead and better finish you'll get.

garagedog
Profile picture for user garagedog
Posts
841
Joined
4/23/2014
Location
Tulare, CA US
Fantasy
687th
garagedog 10/11/2017 8:52pm
10/11/2017 8:52pm
I had an 04 a couple if years ago. I put a 134 kit. Still dog slow. Nothing will help the 04 become fast. Bad year (rc power valves). Mid range only motor.
Dillpickle312 10/12/2017 10:07am
10/12/2017 10:07am
Good news and bad news in the bike: good news Did a little ride around on my home track to break the bike in and it actually kinda rips! I think the carb, air boot, pipe and silencer and a little hair cut on the head will really make this bike sing! Bad news something is whining in the bottom end (which was put together by a questionable source) but splitting the cases will give me a chance to blast the cases and make sure everything is good in the engine. Always looking on the bright side!

Post a reply to: 04 cr125 snail