02' rm 125

Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks
Edited Date/Time 3/13/2019 10:51am
This will be a slow build due to lack of time in between my work schedule,but I will update when I can.
|
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 10/24/2017 5:00am
10/24/2017 5:00am
Here's what I started with,new tires,chain,and grips. Solid top and bottom end,just about everything else was roached.
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 10/24/2017 5:03am
10/24/2017 5:03am


First thing I did was remove all the ratty graphics,commence cleaning everything and ordered a new exhaust (old header was cracked,and silencer had no packing) i opted for the factory fatty and shorty combo

The Shop

See All »
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 10/24/2017 5:07am
10/24/2017 5:07am


Exhaust is on now,along with a factory chain guide (was missing from bike) I have the rmz front fender,cycra stadium plate and fork guards coming in,so those will go on after they show up.
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 10/24/2017 9:41am
10/24/2017 9:41am


Previous owner broke a bolt off In the clutch basket,removed that and replaced everything inside with factory parts,springs,bolts,etc
1
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 10/25/2017 2:48pm
10/25/2017 2:48pm





Fender came in so threw that on number plate and fork shrouds should be in later this week



yjgfikl
Profile picture for user yjgfikl
Posts
151
Joined
3/4/2017
Location
Redondo Beach, CA US
yjgfikl 10/26/2017 10:36pm
10/26/2017 10:36pm
Looking good dude!
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 10/29/2017 2:37pm
10/29/2017 2:37pm
Threw some pro taper se bars on until I can find some triple clamps I like and run a fat bar.
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 10/31/2017 4:43pm
10/31/2017 4:43pm
Got bored so I Chopped rear # plates down,looks a lot better imo.
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 11/4/2017 6:41pm
11/4/2017 6:41pm


Went and rode at a local track today,bike ran great.suspension will be getting shipped to Enzo sometime this month. And some wheels will be built while that’s off the bike.
Wheels will be black tusk hoops,new spoke kit and hubs will he powder coated blue (undecided on which blue)
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 11/12/2017 1:15am
11/12/2017 1:15am
Welp head gasket blew and upon pulling the bike apart i found this jewel,gotta love those diy fixes
Sixeightone
Profile picture for user Sixeightone
Posts
363
Joined
3/8/2014
Location
Central, CT US
Sixeightone 11/13/2017 7:26am
11/13/2017 7:26am
Coby_Hanks wrote:
Welp head gasket blew and upon pulling the bike apart i found this jewel,gotta love those diy fixes
I found that same thing in mine! haha I ordered 3 of those suckers for back up!

Pit Row

See All »
Sidecar
Profile picture for user Sidecar
Posts
1725
Joined
1/29/2015
Location
GB
Sidecar 11/13/2017 9:50am
11/13/2017 9:50am
Nice looking bike, I like the front end better with the side panels cut down!!!
FiendzCC
Profile picture for user FiendzCC
Posts
316
Joined
9/12/2017
Location
Murrieta, CA US
FiendzCC 11/13/2017 12:41pm
11/13/2017 12:41pm
Coby_Hanks wrote:
[img]https://p.vitalmx.com/photos/forums/2017/11/12/224550/s1200_E4097953_21F8_4F45_A3BF_DCD3A1CF660A.jpg[/img]


Hahaha oh no dude
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 11/14/2017 7:09am
11/14/2017 7:09am
Sidecar wrote:
Nice looking bike, I like the front end better with the side panels cut down!!!
Yea i thought it made it flow better,appreciate it!
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 11/14/2017 7:11am
11/14/2017 7:11am
Coby_Hanks wrote:
[img]https://p.vitalmx.com/photos/forums/2017/11/12/224550/s1200_E4097953_21F8_4F45_A3BF_DCD3A1CF660A.jpg[/img]


FiendzCC wrote:
Hahaha oh no dude
Lol not exactly what you wanna find.
Coby_Hanks
Profile picture for user Coby_Hanks
Posts
73
Joined
10/24/2017
Location
Rosharon, TX US
Coby_Hanks 11/15/2017 6:48am
11/15/2017 6:48am
Started tearing it down yesterday,cylinder and piston look to be in great condition,undecided on what to do at this point.fix what needs to be fixed and throw it back together or go ahead and throw a fresh piston,rings,etc in it.

Post a reply to: 02' rm 125