Added reply in a thread RG3 Linkage RMZ 05-10 2/5/2018 2:25 AM

for $300 I'll take it off your hands

Added reply in a thread Problems with Countershaft Gasket Seal 6/25/2013 7:55 PM

yeah does a seal only work once?

Added reply in a thread MX grips, which ones do you use? 6/23/2013 8:26 PM

renthal kevlar regular pattern half-waffle

Added reply in a thread Problems with Countershaft Gasket Seal 6/23/2013 8:17 PM

3 years at minimal usage maybe 1 riding day every 2 months

Added reply in a thread Problems with Countershaft Gasket Seal 6/23/2013 8:16 PM

ok thanks ill look into ordering that

Added reply in a thread Problems with Countershaft Gasket Seal 6/23/2013 8:16 PM

oh i guess it is messed up thanks

Started new thread Problems with Countershaft Gasket Seal 6/22/2013 2:27 PM

Hi everyone, On my 09 RM-Z 250 I'm having some odd problems with my countershaft gasket. I first experienced problems with it when I noticed a small leak last month. My local motorcycle shop recommended to use Yamalube 6b, some black high temp silicon ... more »

This forum thread has 10 replies

Added reply in a thread 98 Jr. Pro 50 won't start 1/13/2013 4:32 PM

Alright thanks for the help. I'll try that all next weekend I gotta get back to school work for now

Added reply in a thread 98 Jr. Pro 50 won't start 1/13/2013 3:03 PM

Ok so the spark pug works, but my compression i think is a problem. It maxes out at 100psi, even that is after like 20 kicks. The first kick takes it to like 30-40, and each kick after that adds less and less pressure. All the gaskets in the top end ... more »

Added reply in a thread 98 Jr. Pro 50 won't start 1/13/2013 2:35 PM

Ya its the factory finish

Added reply in a thread 98 Jr. Pro 50 won't start 1/13/2013 1:57 PM

It did not run. And thank you for all of that I will check back when I perform all that. One thing though, when you say ground the spark plug, can i just touch it to my cylinder head(it's painted though)?

Added reply in a thread 98 Jr. Pro 50 won't start 1/12/2013 8:16 PM

ok thanks. and if it does work what next?

Started new thread 98 Jr. Pro 50 won't start 1/12/2013 6:35 PM

Hi all, I've been slowly rebuilding a 98 KTM Jr. Pro 50 for the last couple months now, and I'm pretty much done and I can't get her to turn over. I've cleaned the carb numerous times and ever other engine part I know is clean and working. I'm guessing ... more »

This forum thread has 13 replies

Added reply in a thread loss of my 4 yr old moto buddy 1/2/2013 12:25 AM

This brings tear to my eyes. I cannot imagine what this is even like for you and your family, but I hope you all are able to recover from such a loss. Rest In Peace Jacob. May you forever be in our hearts.

Added reply in a thread Accomplishment :) 1/2/2013 12:18 AM

yes, yes I do. I want a 2 stroke though. Once Im outa the house and have some money I want to get an rm250

Added reply in a thread Accomplishment :) 1/2/2013 12:17 AM

I actually did ;D haha it was in my garage though so I didnt think any noise would leak though....but I was super eager to see if she worked, so I started it up before even putting the bike all back together(the muffler was still off) and apparently ... more »

Added reply in a thread Accomplishment :) 1/2/2013 12:15 AM

Yeah this is actually the first time I've done legitimate work on my bike, and it does feel good to know I can fix it myself

Added reply in a thread Accomplishment :) 1/2/2013 12:14 AM

My bike had been sitting for a few months and I was having trouble starting it. The needle-float valve was stuck/slightly corroded in its chamber so I had to tear everything apart and clean it. And no I managed to put it all back together with nothing

smile
... more »
Started new thread Accomplishment :) 12/30/2012 3:44 AM

3am: Fixed my bike after 8 hours of working! I wrote a long story but for some reason its not showing, fml, goodnight

This forum thread has 14 replies

Added reply in a thread Best Online KTM Dealer 11/28/2012 9:25 PM

for a KTM only website here ya go: http://www.ktmamerica.com/ I haven't actually bought anything yet but I plan to soon.