I have not done it myself, but was told it was a straight swap. no mods necessary by someone who did it.

Sdi is very good does the same as the pc

I put 2005 crf 450 on mine.had to grind a load off the back, where they sit against frame .

I put 2005 crf 450 on mine.had to grind a load off the back, where they sit against frame .

Cheapest fix is Ptfe tape under the perch clamps bolts not too tight, lets them move in a crash. If you want expensive try the Renthal intellilevers, unbreakable quality.

Evotech southern England, look them up on the net.they have very powerful and reliable engine set ups and excellant suspension work too. They can cater for gp riders, national and clubman riders.

Lightest tubes are stock ktm, they are thin crap.get some ultra heavy duty tubes and forget about punctures.i patch thick tubes and re use unless they have massive holes.

Just get the wp cone valves, and move them onto your next bike, they have good re sale value if you change bike brands. There is nothing better than new cv forks set up for you . Ohlins are a waste of money . re valves disappear when you sell the bike ... more »

Braided brake lines, your old rubber hoses expand when you pull the lever. Venhill make the best ones, if you can get them over the pond.

The newer fork upgrade is the best mod.

They are rumoured to be bringing out new cone valves in differant colours soon.so the new old stock will be discounted.

The best place to spend money on a ktm is the forks.go cone valves if you can afford it.bear in mind you can sell them on for about 50% of the original purchase price, or more , if you change brands , and move from bike to bike if you stay ktm.trax shock ... more »

Was a great year.mine came to the uk from hollywood

Anybody had problems with the tm power valve ?

I used a 4 liter can about 4 years after opening it, no problems . But it could in theory be degraded by moisture in the air inside the can

Just take the end cap off and pull the cone out of the stock pipe.cheap hp