ridinbeast932's Forum Activity

Reply to Which Frameless goggles with Airoh helmet? 11/16/2020 1:22 PM

That's the model I'm interested in, but need confirmation they'll fit. A "maybe" isn't good enough haha.

Reply to Home Cooking Too Good Not To Share 10/27/2020 2:17 PM

I made pork belly bombs a few years ago. Gotta get them back on my to smoke list. They were the bomb!

Reply to Moto Van Build! 10/27/2020 2:08 PM

I might be stealing your ramp on the door idea! I really need to swap out my hinge-less for a bi-fold.

Reply to Moto Van Build! 10/22/2020 5:29 AM

Got some more work on the pressure washer setup done last night. 12V pump is mounted and I'm building a "box" to house the pressure washer and accumulator. The barb on the left will connect to pump supply, barb on the right will go into the van for aux

... more »
Reply to Moto Van Build! 10/22/2020 4:46 AM

The 144 high roof is the same height as the 170 high roof. I plan to make some sort of bed platform that I can raise up when I have bikes in there and then lower down when they're out.

Reply to Moto Van Build! 10/22/2020 4:42 AM

You can get them in 4X4. ~ $10k option. I wanted it but not worth the few beach trips I'd do each year.

Reply to Moto Van Build! 10/22/2020 4:40 AM

I think the bed length is about 10.5' so it'd be a tight fit!

Reply to Moto Van Build! 10/20/2020 2:46 PM

Nice, jealous of the color! What kind of rear step is that? I need one!

Reply to Moto Van Build! 10/20/2020 2:42 PM

I plan to use my Honda EU2000i generator to power the pressure washer. Not worth the battery bank and inverter required to try to run it that way, like you said just too much draw. I have a cutting edge power solar generator on the way to use with 1 ... more »

Reply to Moto Van Build! 10/20/2020 12:46 PM

Motosport: https://www.motosport.com/motosport-clamping-wheel-chock Thanks! Excited to see how it turns out!

Reply to Moto Van Build! 10/20/2020 12:41 PM

No, but I will try to get some this weekend. I staggered the chocks and left plenty of space behind the wheels for gas jugs, stands, etc.

Reply to Home Cooking Too Good Not To Share 10/8/2020 12:28 PM

No problem! Be sure to post up your method and how they turn out! I'm still working on my craft. I think this was my 6th rib cook with this smoker and the first one I've truly been happy with.

Reply to Home Cooking Too Good Not To Share 10/8/2020 12:24 PM

Nice! My buddy got one for his Traeger and loves it as well! The Rec Teq app has treated me well so far. I believe it can do most stuff the FireBoard can minus a few probes.

Reply to Home Cooking Too Good Not To Share 10/8/2020 5:05 AM

195. I'm not sure using a probe is the best method, seems hard to get consistent temps because of how thin the racks are compared to a butt for example. From what I've found, the 3-2-1 method is garbage. 2 hours is way too long to be wrapped. I couldn't ... more »

Reply to Home Cooking Too Good Not To Share 10/7/2020 10:13 AM

Rec Teq RT-340, love it!

Reply to Home Cooking Too Good Not To Share 10/7/2020 9:48 AM

Made some applewood smoked ribs a few weeks ago. My best yet!

Reply to Let's See those Sprinter/Transit Setups! 9/21/2020 3:15 PM

Can you provide some details on that bed setup? I have the same van and shooting for something like that!

Reply to Roll Call: Mercedes Sprinter Owners! 9/17/2020 3:50 PM

Did you just screw those into the wood floor or bolt all the way through the metal floor? I'm adding insulation and other 1/2" of plywood underneath. Stock floor is pretty thin and didn't seem like I'd get enough bite to screw shit into.

Reply to Roll Call: Mercedes Sprinter Owners! 9/17/2020 3:38 PM

I can't stop thinking about ideas! Picked up some wood and insulation for the floor so that's my first step once the rain stops! Have a water tank, pressure washer, fittings, etc on the way for an on board pressure washing setup. Next is figuring out

... more »
Reply to Roll Call: Mercedes Sprinter Owners! 9/13/2020 2:31 PM

Picking a 144 diesel up tomorrow or Tuesday! Got it for $2100 under MSRP so I'm pretty happy with that!