portroyal's Forum Activity

Reply to Dirt series 9/21/2018 11:53 AM

Cahuilla

Reply to Cable routing help 9/18/2018 10:28 PM

All I need is the new style fork guard and I can run that line right?

Reply to Cable routing help 9/18/2018 10:05 AM

I’ll try that again but the groove doesn’t hold the cable in, it’s very loose sitting in that.

Reply to Cable routing help 9/18/2018 9:52 AM

She’s definitely tight as can be

Reply to Cable routing help 9/18/2018 9:45 AM

It had tabs that’s said “to master cylinder and to rotors” and I installed it accordingly, maybe galfer messed up.

Reply to Back hurts in attack position 6/27/2018 7:35 AM

I used to have this same problem when my diet wasn’t on point and when I wasn’t exercising in the gym. Deadlift deadlift deadlift, second best exercise you can do in the gym besides squats. Ab work to help strengthen that core and the stability of your ... more »

Reply to 2003 YZ125 part out 6/1/2018 10:07 AM

Yup, both radiators are fine. A slight bend in one side but they operate.

Reply to 2001 RM250 running rough 6/1/2018 7:15 AM

Let me know if you have any questions man.

Reply to 2001 RM250 running rough 6/1/2018 5:21 AM

You basically flip the carb upside down, and measure how far the float is protruding from the body of the carb. I'll post a picture of the one I have in my YZ manual, the height may be different for the RM because I don't know what carb it is. Grab a ... more »

Reply to Are YZ125 hubs the same as the YZF250/450? 5/31/2018 7:31 PM

https://thumpertalk.com/forums/topic/546770-wheel-interchange-what-fits-what/ Best write up on wheel interchange I’ve seen yet.

Reply to 2001 RM250 running rough 5/31/2018 7:23 PM

When you pulled the carb apart did you check the needle valve (it’s the little guy that sits by the float usually held up by two little wire like retainers), a lot of times these get scratched up or they aren’t sitting correctly due to the float not ... more »

Reply to 01 YZ plastics fasteners 5/31/2018 7:16 PM

I’ve got the spec bolt kit, just ended up going through all of the plastic bolts because it didn’t have a full set and I didn’t want to buy an entire new kit just for those bolts. Didn’t know they made flange bolt specific kits

Reply to 01 YZ plastics fasteners 5/31/2018 7:10 PM

You are the man, I appreciate the help dude

Reply to 01 YZ plastics fasteners 5/30/2018 12:33 PM

Yes, I’m capable of going on a site and looking up part numbers. Multiply those $5-7 a bolt by 20 and you might realize that $15 for an entire kit is much cheaper than $100 buying each OEM bolt separately.

Reply to 01 YZ plastics fasteners 5/30/2018 11:16 AM

Now that's the answer I was looking for, I appreciate it man.

Reply to 01 YZ plastics fasteners 5/30/2018 7:52 AM

Yeah I’ve already got those on order, thanks man.

Reply to 01 YZ plastics fasteners 5/30/2018 7:31 AM

I’m looking at the collars and the inserts on the fender that I need as well. Cool, I’ll proab just buy one of each bolt and size them up.

Reply to Engine Cleaning 5/27/2018 4:02 PM

Awesome man. I appreciate it, Brillo pads are magical.

Reply to Water Pump Leak 5/18/2018 8:53 AM

I appreciate the help, If I’m not mistaken it’s just 2 oil seals on each side and a washer correct? 01 YZ250

Reply to YZ Black front wheel Excel Takasago 4/23/2018 10:50 AM

Sold*