mx-doctor's Forum Activity

Reply to 2016 and newer FC450 owners... 4/29/2019 6:06 AM

Just saw that the 450 FC Rockstar Edition 2019 has a new part no. for the cpl. slave cylinder (#26632061044) and also the piston (#26632066000) and O-ring (#26632067000) are available as single part now... seems that Husky has reacted to the failures ... more »

Reply to 2019 ktm factory edition fork wear ring 3/3/2019 11:02 PM

Here is the part no. #48601948

Reply to Best Bib Mousse out there? 2/13/2019 5:42 AM

"It is also possible to use worn rear mousses for the front, that way you save quite a bit by buying only rear ones." I don`t think so because you won`t be able to fit it in the front tire(s)...

Reply to Best Bib Mousse out there? 2/12/2019 10:42 PM

From my experience... durability wise the Michelin is the best by far, but also quite expensive. I´m currently using Dunlop in one wheel set and Technomousse in my spare wheel set, both good grip wise and also quite affordable.

Reply to KTM mods/solutions 1/29/2019 10:10 PM

I would also suggest the older return spring version if you`re facing problems with the current one. Strange but I had three bikes since MY16 and not a single broken spring?!? The steering stem nut from the actual Freerides have a holoe inside and they ... more »

Reply to KTM SXF WP Trax shock 1/15/2019 7:27 AM

Imo the trax springs aren`t broken as I´ve heard that kind of noise on some TRAX shocks now... nevertheless checking all bearings (linkage, swingarm, etc...) is a good idea anyway.

Reply to KTM SXF WP Trax shock 1/15/2019 2:49 AM

This sound is normal for a TRAX shock as it`s the Trax mechanism that you hear there. Depending on how many Trax springs are installed inside the effect and also "sound" is more or less. I wouldn`t worry about it too much.

Reply to Building My Track 1/14/2019 7:25 AM

Reply to Herlings sand practice. New. 11/27/2018 7:01 AM

That corner speed is fXXXing amazing :-)

Reply to New Electric Husqvarna MX Bike 11/6/2018 6:09 AM

KTM version presented as well... https://www.crossmagazin.de/news/technik/news-20181106141006.htm

Reply to KTM Adjustment Gauge Tool for X dimension 10/11/2018 2:36 AM

I have the tool left over from my old 250SX 2-stroke and I measured 3,7mm!

Reply to 2018 ktm450sxf oil type 9/25/2018 7:03 AM

BEL RAY Thumper Works 10W50

Reply to Moto gloves recommendations - lightweight and minimalist 9/24/2018 4:15 AM

100% itrack ... my favourite gloves for the last three years already! :-)

Reply to 2016 Husqvarna FC 350 - UPDATED! 9/23/2018 11:06 PM

Nice bike! One thing you should try are the 2017/18 aluminium engine hangers! They make a big improvement in handling and feeling for the bike :-)

Reply to I need / want to mod my 17' Husky 125. Some advice? 4/25/2018 4:55 AM

VHM in Netherlands should be a good address... :-) https://www.vhm.nl/en

Reply to Show us your bike! 4/25/2018 4:47 AM

Reply to Ktm Valve check after 1 hour? 3/16/2018 4:07 AM

I think this Comes from older 4-strokes where valves/seats settled in a lot after the first few hours (450, 520, 525 SX), but on all modern fourstrokes this shouldn`t be a Topic until 50-60 hours... at least on my last KTM and Husqvarna`s it never was ... more »

Reply to Alpine A1 vs A4 roost protector? 2/6/2018 11:37 PM

I went for the A-4 because of the (better) protection on the side (ribs, kidneys, etc...) and I`m super happy with it! Otherwise they are both pretty similar.

Reply to Husqvarna Plastic Update 6/8/2017 1:30 AM

I guess it won`t work because Frame and subframe is new and diffrent on the new Generation ones and also fueltank etc... so quite a big parts list. Front Fender and front number plate should be easy.

Reply to 2017 ktm 450sx-f mega bomb 5/8/2017 11:34 PM

HI, I think the stock header is the best choice regarding rideability... only negative aspect is weight and absolutely not mounting friendly :-(