labbe001's Forum Activity

New thread Heat Race Determination 2/19/2020 2:25 PM

I’ve been watching Supercross for years but have never understood how they determine which heat an individual rider will race in. I know they do timed qualifying before the heat races but notice that the fastest guys race are divided,..not racing in ... more »

This forum thread has 12 replies.

New thread Pilot Jet Size 2/18/2020 4:29 PM

On a 2 stroke bike (specifically an 02 CR250) would the pilot jet being too large cause the bike to be really hard to start cold? I’ve steadily increased from a 45 and am currently at a 55 (air Stryker carb from a 2000 cr250)....there has been little ... more »

This forum thread has 1 replies.

New thread CR250 Overheating 2/9/2020 5:09 AM

I have a CR250 that had been modified with the Eric Gorr 265 big bore kit. Yesterday I competed in an extremely muddy hairscramble event and almost didn’t finish due to the bike overheating. I’ve never had this happen before and assume it’s bc of the ... more »

This forum thread has 6 replies.

New thread Number Plate Backgrounds 10/10/2019 4:26 AM

Hi Guys, I'm just finishing a restoration on a 1991 cr80 and am in need of some custom number plate backgrounds. I like the look of the blue background with the yellow numbers and the camel supercross logo. See Pic below.

I contacted EVO-MX ... more »

This forum thread has 12 replies.

New thread 1992 cr250 FMF Pipe fitment 9/5/2019 10:15 AM

Hi Guys, I purchased a 1992 CR250 for a project build. The bike came with a FMF pipe installed that seemed to be in fairly good condition. I would like to use the pipe but am having problems with it fitting correctly. Fitment is so off that I thought

... more »

This forum thread has 0 replies.

New thread 1992 cr250 FMF pipe Fitment 9/5/2019 4:56 AM

Hi Guys, I purchased a 1992 CR250 for a project build. The bike came with a FMF pipe installed that seemed to be in fairly good condition. I would like to use the pipe but am having problems with it fitting correctly. Fitment is so off that I thought

... more »

This forum thread has 4 replies.

New thread 02 CR250 Center Clutch Cracking 3/24/2019 1:01 PM

Hi All, So as it turns out, my clutch went out on me during pre-race practice of the season opener...bummer. Anyway, I have disassembled the clutch assembly and noticed there is some spiderweb like cracking in my clutch center. Please see pics below.

... more »

This forum thread has 3 replies.

New thread WTB CR80 Plastics 3/12/2019 11:15 AM

Guys, I'm looking for plastics that will fit a 1988-1991 CR80r. I'm interested in either a full set or buying piece by piece. Not looking for a mint set but just something that is usable and in fairly decent condition. I've been keeping an eye out on ... more »

This forum thread has 0 replies.

New thread Mystery Bearing 1/15/2019 5:13 PM

Hi All, I’m in the process of doing a restoration on a 1991 CR80. It’s been more than a year since I tore the engine down and removed all of the bearings from the bottom end. I purchased a hotrods transmission bearing kit but it does not include a properly

... more »

This forum thread has 14 replies.

New thread 02 CR250 wide open when cranking 11/20/2018 2:23 PM

hello all, I just finished a complete top and bottom end on my 02 Cr250. When I went to kick it, it took at least 100 kicks to finally fire up. When it did finally start, it was wide open. I immediately killed it to do some investigation. I checked the ... more »

This forum thread has 8 replies.

New thread 05-08 CRF450 Graphics One Industries 11/13/2018 2:14 PM

May fit other bikes as well.

Looks great on white plastics....here is the same style on my cr250 shoot me an offer if interested ... more »

This forum thread has 2 replies.

New thread 1991 cr250 for sale 11/1/2018 6:26 AM

not mine but thought i'd post if anyone is interested.

https://bham.craigslist.org/mcy/d/1990-honda-cr250/6726014610.html ... more »

This forum thread has 1 replies.

New thread Balancing Crank CR265 9/14/2018 6:49 AM

Hi guys, I have a 2002 CR265 that vibrates horribly. I know a 2 stroke 265cc will have its fair share of vibration but I've never ridden a bike with this much. I've tried just about everything I know to do beside having the crank balanced. I would like ... more »

This forum thread has 11 replies.

New thread Crank Balancing 02 CR265 9/12/2018 4:25 PM

Hi Guys, First off, a little about the bike. I have an 02 CR250 that I bought brand new when they came out in 2001. Just like most brand new bikes, it was as smooth as butter and an absolute rocket. Over time, it seemed to develop a bad vibration issue. ... more »

This forum thread has 4 replies.

New thread Older YZ125 Craigslist $250 9/12/2018 3:10 PM

not mine but thought it may interest someone looking for a project... https://bham.craigslist.org/mcy/d/yamaha-yz-250/6694696370.html

This forum thread has 4 replies.

New thread 1997 KX125 for Sale 8/30/2018 7:28 AM

not mine but saw it up for sale on craigslist and thought it may be of interest to someone... https://bham.craigslist.org/mcy/d/1997-kx-125/6684431809.html

This forum thread has 1 replies.

New thread CR250R Swingarm 1/11/2017 5:05 PM

Hi All, I need to purchase a Swingarm for my 2002 CR250. I see that the 02 and the 03 have the exact same part number. Ive seen some used Swingarms for sale on eBay that say they fit an 02-07. Does anyone know if these swingarms are a direct swap even ... more »

This forum thread has 6 replies.

New thread 2002 CR250 Knock and Re-Build 3/17/2016 6:24 PM

Hi All, I have a 2002 CR250 that I purchased new in 01 and have done many things to the bike over the years. A while back, I sent the cylinder jug off and had it bored to a 265cc. I don't have much time to ride the bike but over the past couple of months,

... more »

This forum thread has 9 replies.

New thread 2002 CR250R fork wrench 3/1/2016 5:16 PM

I have a 2002 cr250 with the oem forks on it. I need to replace the fork seals as they are leaking and need to buy a fork cap wrench. I know the forks on the bike are 47 mm forks. My question is, do I need to get one specifically for 47 mm forks or do ... more »

This forum thread has 2 replies.

New thread WTB Parts for 96 KX250 1/2/2016 8:21 AM

Hi guys, I'm starting a restoration project on my 1996 KX250. My intent is to go as stock as possible. Please reply or contact me if you have some parts (graphics, plastic, seat cover) for a stock 96 KX. Thanks

This forum thread has 25 replies.