Added reply in a thread Segment times 2/11/2020 12:02 PM

Id imagine the yellow leader lights would be the segment markers. It only makes sense once the rider gets to the end of a segment the yellow leader light flashes.

Added reply in a thread Cerakote clear coat exhaust pipe 2 stroke 2/11/2020 8:46 AM

Does the smooth finish on the pipe allow cerakote or clear to stick? Just curious. I like the idea.

Added reply in a thread Millennium Technologies Cylinder Replate Review 2/11/2020 7:40 AM

Not sure what millennium is talking about with running lean because theres no sign of a lean condition. According to millenniums own guide, that looks like it was ran without oil and seized. Millennium’s guide

Added reply in a thread How much HP does the spark arrestor rob? 2/11/2020 7:01 AM

Less than youd ever be able to feel.

Added reply in a thread How Do I Get an Anderson Jersey? 2/11/2020 6:04 AM

Ebay & ask him for one at the race.

Added reply in a thread 250 SX East 2/10/2020 11:55 AM

Should be the jordan smith show.

Added reply in a thread Kibblewhite racing valve spring kit kx250f 2013 2/7/2020 4:45 AM

The thing you want to look for is the springs dont compress to solid from the amount of lift from the cams. If you can find the lift spec on the cams and its less than the .445” kibble white springs will allow then youre good to go.

Added reply in a thread Eli V Kenny 2/7/2020 4:36 AM

The brutal truth right there.

Added reply in a thread Any objective Supplement comparison guides out there? 2/6/2020 4:38 PM

1st phorm is the best combo of dissolving capability and taste. You get what you pay for

Added reply in a thread Changing fork oil 2/6/2020 12:09 PM

Shouldnt have to seperate the forks. Take the caps off and make sure the spring area is exposed so it drains. Let it drain for a long time. If you want to be thorough then seperate them clean and reassemble. This is the way i do mine. Not that big of ... more »

Added reply in a thread Countershaft bearing installed crooked (yz250) 2/6/2020 6:16 AM

When i did my yz250 all i had to do was heat the case to about 200F. The bearings would go right in without issues. I tried freezing some bearings but all they did was stick. Best method is heat the case, apply grease to the outside of the bearing and ... more »

Added reply in a thread Connecticut town trying to ban dirtbikes 2/6/2020 5:46 AM

Meanwhile everywhere

Added reply in a thread Frame cracked on 2014 KTM 250sx 2/4/2020 10:33 AM

In addition to the above dont try to weld it and ride. Thats a critical spot in the frame. Your entire ass end is connected there.

Added reply in a thread Monster Energy Supercross 3 (Game) 2/4/2020 8:51 AM

Can anyone confirm its not a copy/paste from the last one?

Added reply in a thread Best track so far? 2/4/2020 7:07 AM

I thought oakland was good for racing. Lots of 180 turns for passing. The bend in the one section was one lined but i liked the rest.

Added reply in a thread Ol Uncle Ronnie on the decline? 2/4/2020 5:51 AM

Ron is getting old. I used to think his tech tips were funny and this last one he made was super cringey. The thing is past its prime for sure. It was funny 3+ years ago. Hes just milking it now.

Added reply in a thread Is a replate needed for my cylinder 2/4/2020 5:16 AM

Just send it to powerseal or millennium. They do the replates for the smaller shops. Send a piston too so they size it correctly.

Added reply in a thread 4 stroke vs 2 stroke 2/3/2020 9:47 AM

reason i switched is because i got tired of messing with the carb and mixing gas on my 125. I have the same amount of fun if not more on my 450. Switched and havent looked back. Correct answer is any dirtbike is fun af.

Added reply in a thread 12 kx250f hard to start 2/1/2020 6:48 AM

Make sure the map and tps voltage is correct since you replaced them.

Added reply in a thread Modern day gloves 1/31/2020 5:10 PM

Modern day gear has no protection from anything. Its paper thin.