jpatz319's Forum Activity

New thread $20,000 Pro Shootout Race in NC 10/18/2021 8:10 AM

All, One of the best tracks in NC is having a $20,000 pro shootout on Halloween weekend. They are having two pro classes - Open A and Open 2-stroke A. It should be a good time. The track is a national-caliber track that should produce some amazing racing.

... more »

This forum thread has 1 replies.

Reply to Radiator Guards and Braces 7/27/2021 6:19 AM

You are better off sending your rads to ICW and getting them braced up. Way stronger than the WC braces.

New thread WTB - Renthal FatBar 839 7/22/2021 1:31 PM

I'm looking for a set of Renthal Fatbar 839's. They are the stock bend on '19+ CRF450R and '21+KX450.

This forum thread has 1 replies.

Reply to Let's see/review those 2019 kx450s 2/15/2021 4:49 PM

Oil changed every 3-5 hrs depending on the track conditions. The bike has ~30hrs on it. I was thinking that it looks rough for the hours. I was wondering if I would need to crack the cases the check that screen.

Reply to Let's see/review those 2019 kx450s 2/15/2021 3:48 PM

I took the valve cover off to check and the valves and cams. Is this wear on the cams okay?

Reply to Cerakote on a airbox 1/26/2021 5:14 PM

I was thinking it would be pretty durable and I was worried about the how dark the black would be if I dyed it.

New thread Cerakote on a airbox 1/26/2021 12:58 PM

thinking about cerakoting my airbox black on KX450. Has anyone done this and if so how well did it hold up?

This forum thread has 26 replies.

Reply to Looking at a 2015 Ford Transit 350 XL 148WB-feedback please 1/21/2021 11:05 AM

It was the system that Ford used to connect the transmission to the driveshaft. The final recall replaced it with a traditional u-joint.

Reply to Looking at a 2015 Ford Transit 350 XL 148WB-feedback please 1/21/2021 6:00 AM

I bought a '15 cargo van with the 3.7 in with similar miles. I would look into the driveshaft coupler recall and get it done if it hasn't already been done.

Reply to 2020 KX 450 Valve Adjustment 1/18/2021 7:40 AM

I have a '20 450 and my exhaust valves went tight at ~25hrs. It doesn't seem too bad to me.

Reply to Crf450 out - kx450 mc450 in. 12/16/2020 11:28 AM

I would look at Sport Cycles in Rockingham NC. I got my '20 for $7800 OTD. The website shows they have both a '21 CRF450 and '21 CRF450WE.

Reply to John Dowd ok? 12/11/2020 11:40 AM

is that High Voltage?

Reply to Lets see those KTM 350XCF KR557 editions! 12/10/2020 8:22 AM

Man Luke, you have switched from KTM to Yamaha and back more times than I can count.

Reply to Looking for a good dealership IN NC/SC/TN/GA area to purchase a new bike. 11/19/2020 11:29 AM

Sports Cycles in Rockingham will give you the best deal on a Kaw or Yamaha.

Reply to Mobius (or any other) wrist brace 11/18/2020 5:45 AM

I had the same injury 5 years ago. I originally had the Allsport Dynamic brace for my wrist. The plus of the AllSport brace is that it has a hard stop to prevent your wrist from moving too far. The biggest negative of the AllSport is the strap that goes ... more »

Reply to T2 vs C12 11/10/2020 6:06 AM

I have always run C12 mixed 50/50 with unleaded pump gs in my yz's and have had great luck. It also helps the wallet from spending 75 every two weeks.

Reply to MX Tech discount code 11/3/2020 1:13 PM

If I remember correctly they are for faster riders of either discipline.

Reply to MX Tech discount code 11/3/2020 12:48 PM

If my bike doesn't sell this week I am pulling a Lucky Carbon kit out and will sell for $950. Let me know if you're interested.

Reply to 2017 KTM 250sx 10/26/2020 11:27 AM

Price lowered to $4650.

Reply to Post a picture of your Mountain Bikes 10/22/2020 8:37 AM

Picked up a 2021 Ripmo AF to replace my YT. The ripmo is a great do-everything machine.