Added a comment about feature Vital MX 12 Days of MXmas, Day 3 12/13/2016 6:42 AM
jpatz319

I wouldnt mind those

0 0 0

This feature has 389 comments.

Added reply in a thread Moto-Master brake discs. Opinions? 11/30/2016 6:06 AM

It is a floating rotor

Added reply in a thread Moto-Master brake discs. Opinions? 11/30/2016 5:57 AM

Tusk has an oversize setup that i threw on to my rmz after a crash and its working as good as the oversize EBC or braking kits I had

Added reply in a thread Change your yz250 piston! 10/5/2016 12:46 PM

I had the same problem on my YZ at 20 hrs on a stock piston. The skirt cracked off and locked the motor up. I switched to the wiseco GP style piston and I cant get 25hrs. That is with VP C12 and maxima mixed at 40:1 with Redline super lightweight oil. ... more »

Added reply in a thread Tusk Hubs used with Bulldog Spokes? 8/23/2016 12:34 PM

I ran Tusk hubs with excel spokes mated to DID DirtStar rims. They fit but was tight, so all I did was take a drill bit and open them up a hair. Everything has been good besides that.

Started new thread 2011 Yamaha YZ 250 8/9/2016 6:44 AM

2011 YZ 250 - $4150 obo Just rebuilt. 0 hours on top end and 8 hours on rebuilt bottom end. Always ran with VPC12 with Maxima K2 premix. Redline super lightweight gear ran. -Forged Wiseco piston -Balanced crank -New crank and transmission bearings -Port,

... more »

This forum thread has 1 reply

Added reply in a thread Don't Overshoot Glen Helen's Triple Step-Up... 5/27/2016 5:03 AM

Have we forgotten that is for a pro race? These guys are fully capable of timing the speed with other people.

Added reply in a thread 2011 Yamaha YZ 250 5/17/2016 5:24 AM

Haha. I wish I had enough money to give out free bikes.

Started new thread 2011 Yamaha YZ 250 5/16/2016 12:00 PM

2011 Yamaha YZ 250 $4250 obo Fresh top end with a rebuilt bottom end. Plastics conversion kit and wheels put on when the bike was rebuilt. Great bike. Engine -New Wiseco forged pistion -Cut head -ported and polished cylinder -cylinder matched to cases

... more »

This forum thread has 3 replies

Added reply in a thread MUST have YZ250 mods? 13' in particular 1/5/2016 7:38 AM

The 16 guards fit right up. Only the front fender needs modified.

Added reply in a thread MUST have YZ250 mods? 13' in particular 1/5/2016 7:38 AM

The bike is a '11 that has gone through many different looks and mods. Current mods are - Cut Head - Port and polished cylinder and carb - Blueprinted motor with balanced crank - Polished Transmission - DEP pipe and modified DEP silencer - Dirt Star ... more »

Added reply in a thread MUST have YZ250 mods? 13' in particular 1/5/2016 4:31 AM

It you want to kill the hit at the bottom drop a tooth in the rear sprocket and run a vforce3 reed valve. If you really want a top end monster cut the head to bring it back to pre '11 us spec and port the cylinder. Also blueprinting the motor will make

... more »
Added reply in a thread Eleven 10 Mods Story - Holy Crap! 11/24/2015 11:52 AM

I dont want to start anything but there is a whole back story the Eleven-10 team and what went on behind closed doors. The team was even more of wreck than the interview shows. The whole Eleven-10 team was comprised of good people but some of the went ... more »

Added reply in a thread Anyone looking for KYB SSS? 11/24/2015 11:22 AM

I have a set from an 08 for sale I also have the rest of bike besides the motor cases.

Added reply in a thread Project YZ 250 thoughts... 11/5/2015 4:52 AM

If you do end up buying a steel frame one I have a suspension set-up off of a 08 YZ 250 that im looking to sell.

Added reply in a thread Chain and sprockets 11/4/2015 4:35 AM

I have had great luck with the Vortex sprockets and the high quality RK non o-ring chain

Started new thread Yz aluminum frame swap 6/11/2015 3:45 PM

I got a good deal on a steel frame yz144. I also have a 08 yz250 with a shift shaft thrown through the cases. I was wondering if it is possible to swap the 144 motor into the 250 frame and suspension.

This forum thread has 8 replies

Added reply in a thread Peick's creative (but not all that original) line at Hangtown 5/18/2015 12:07 PM

I have always found the yellow markers more as "suggestions" than the edge of track.

Added reply in a thread Highpoint Amateur day 5/5/2015 4:41 AM

Sunday after the national and you will need a AMA card and a PAMX membership. You may be able to buy a one day pass for PAMX.

Added reply in a thread Boots?! 4/7/2015 9:53 AM

They are holding up better than my Tech 10's. I had to hammer my buckles shut on them plus Im a fan of the small toe box.