Lives in: Statesville, NC USA

Member since: 03/24/15

Recent Activity Filter:

Added reply in a thread 125/150/250/300 KTM/HUS/GG jetting thread 9/3/2019 8:43 AM

I rode this weekend with some updated settings: 50/50 Pump Gas/C12 MJ 490 PJ 32.5 AS 2.0 turns out Needle jet S4 Needle 42-75 on the 3rd clip Slide 5.50 PV 1.5 turns in from all the way out Fuel mix 60:1 with motorex oil She ran get and is no longer ... more »

Added reply in a thread 125/150/250/300 KTM/HUS/GG jetting thread 8/27/2019 8:15 AM

Okay. Do you think you would have to change the needle at all to go along with the slide change?

Added reply in a thread 125/150/250/300 KTM/HUS/GG jetting thread 8/26/2019 1:44 PM

I'm running 50/50 C12 and pump at 60:1. I do ride the bike like a 125 wide open everywhere. I was thinking about running 40:1 and changing the jetting if it is too rich. Do you have the specs for a 5.5? I have my stock slide and can cut to match.

Added reply in a thread 125/150/250/300 KTM/HUS/GG jetting thread 8/26/2019 12:45 PM

I am running jetting that Aj suggests. The bike runs great but is running way too hot. I bumped the MJ up to a 490. Should I go to a richer slide keep going up in MJ?

Added reply in a thread Your job/career 8/23/2019 7:58 AM

Plastics Engineer for a large pool equipment company. I don't know if it would still be my first choice but when i entered school (2009) I opted for a degree with a 95% job placement.

AJ565 left a comment 7/19/2019 11:24 AM

EZ Designs in Austin, Tx.

Added reply in a thread '18 250sx build (update BNG!) 7/19/2019 8:44 AM

Who did you get the graphics through with redbull logo? If you don't want to reveal your sources I understand with the bull being very protective.

Added reply in a thread New rule changes for this upcoming weekend 7/18/2019 7:11 AM

I understand that you love your 2 strokes but please stop trying to turn every thread into a "bash 4 strokes" thread. 4 strokes have been around for 20 years now and they are not going anywhere. I think its time you just learn to live with it.

Started new thread New Fox V3 Helmet 7/12/2019 1:11 PM

What are everyone's thoughts on the new Fox V3 helmet? I am in the market for a new lid and wanted to hear some real world feedback. My past helmets have been Arai's and Shoei's but I would like something with the newer rotational technology in it.

This forum thread has 15 replies

Added reply in a thread 2017 promaster motovan maybe trade for truck 6/18/2019 12:41 PM

Not looking currently but how is putting the bike in with the low roof?

Added reply in a thread 2017 TC250 New to me 5/29/2019 1:20 PM

I agree with jeffro on AJ's specs. I live in the Charlotte area and run his specs on a '17 KTM. It made a night and day difference with how the bike runs. Here are AJ's specs that I am running MJ 470 PJ 32.5 Slide 5.75 (comes from a 04 KX125) Needle ... more »

Started new thread 2017 KTM Shift Fork Identification 5/1/2019 5:23 AM

I am trying to figure out what shift fork is what part number. The forks have no parts numbers on them but they do have letters on them. one has a U and the other has a W. The two part numbers are 79234003000 and 79234002000.

... more »

This forum thread has 2 replies

Added reply in a thread KTM bar clamp suggestions? 3/29/2019 6:36 AM

Luxon has a really nice set to fix this exact issue.

Added reply in a thread Partially torn patellar tendon...brace? 3/7/2019 5:32 AM

I have the same injury. I currently have the Pod K4's. They are super comfortable and reasonably priced. I would also look at the Mobius braces.

Added reply in a thread 2019 KTM 250SX Must do's? 3/5/2019 11:03 AM

I highly recommend doing the jetting AJ565 posts about in his bike build thread. It helped clean up the mid throttle. I also agree with a pipe and silencer and drop to a 49 tooth.

Added reply in a thread 2019 Husqvarna FC250 Race bike build 3/5/2019 10:58 AM

where are you sourcing the Kite slave cylinder?

Started new thread Mikuni TMX 38 - Needle Jet 2/3/2019 3:41 PM

I’m re-jetting my 2017 KTM 250 and I cannot for the life of me figure out how to get the needle jet out. Is there a trick to it?

This forum thread has 4 replies

Added reply in a thread Spoke with my wallet from France... 12/18/2018 11:33 AM

What silencer is on the bike?

Added a comment about feature 12 Days of MXmas: Thor 12/6/2018 11:46 AM

I need something better than my ratty old moose bag.

0 0 0

This feature has 303 comments.