jonahdru222's Forum Activity

New thread WTB: +4” CRF50 swingarm 5/7/2019 4:52 PM

looking for a 16” (+4” from stock) CRF50 swingarm. not specific on brand. 3372780771 let me know whatcha got! thanks!

This forum thread has 0 replies.

Reply to Nicest track you've ridden to not have a national 8/26/2018 5:40 PM

Golden Pine Raceway in Prentiss, MS. Would be a nightmare for logistics/airport access but man that track was beautiful and so fun.

Reply to [FINISHED] ‘06 CR250 Factory Honda Build 8/19/2018 5:00 PM

I was told that on the 3rd gen CR’s you can run the long body, but the fit will be really tight. i believe they said the bowl touches the cases. i have plenty of room with my short body. with that being said, i’m fairly positive that the 95 will have ... more »

Reply to 2006 CR250 RC Valve issues [With Video] 8/16/2018 6:53 PM

cables are brand new and tensioned correctly. i’m convinced it’s the potentiometer. does anyone know if there is a replacement or if i just need to buy a whole new assembly? i’d hate to do that since i just changed the motor and all.

... more »
Reply to 2006 CR250 RC Valve issues [With Video] 8/16/2018 3:24 PM

HELP replaced the servo motor and it’s still fluttering See Video. Unless this is normal and my problem is elsewhere..?

New thread WTB Performance ECU/Ignition 05-07 CR250 8/16/2018 11:28 AM

trying to find some sort of performance or reprogrammable ECU/Ignition for my 06 CR250 Let me know if you have one or know of any companies that make one for these years because im not finding anything on google.

This forum thread has 5 replies.

Reply to 2006 CR250 RC Valve issues [With Video] 8/15/2018 1:37 PM

Did you change the motor or the whole Servo Assembly? If you only changed the motor, do you recall info on the other questions I had?

New thread 2006 CR250 RC Valve issues [With Video] 8/15/2018 9:15 AM

Hey guys Started having some troubles with my power valve on my 06 CR250. At about 3/4 throttle the power would "pulsate" for lack of a better word. Went through the carb, the engine, and all the electronics before I removed the RC Valve cover and found ... more »

This forum thread has 22 replies.

Reply to [FINISHED] ‘06 CR250 Factory Honda Build 8/15/2018 8:44 AM

Sorry i'm not the best vitard lol, just seeing this. I like the Keihin, lately I have been having RC Valve troubles and found a few threads that tell me to replace the motor so ill see if that helps. I can't say that the Keihin is worlds better than ... more »

Reply to 1997 CR125 Rebuild, Lamson Style 8/15/2018 8:24 AM

Derek is a great guy. Highly recommend him on any build, modern, vintage, whatever you may have. He does his research for each model bike, he doesn't just give you a big bore and call it a day. He knows his shit. You should have seen the 96's I saw at

... more »
Reply to WTB Alpinestar Tech 7 or 10 8/6/2018 4:36 PM

have some for sale in a new post in the bazaar. size 9 tech 7's

Reply to [FINISHED] ‘06 CR250 Factory Honda Build 7/12/2018 4:43 PM

shhhhhhhh ? Honda of Houston had a killer sale on pirellis that i couldn’t pass up. i already have Dunlop’s on there now

Reply to [FINISHED] ‘06 CR250 Factory Honda Build 7/12/2018 6:48 AM


New thread WTB Honda oversized front rotor/caliper bracket 6/14/2018 6:50 AM

I've got a 2006 CR250 id like to put an oversized rotor on. Looking for a wave type rotor. 337-278-0771 TIA

This forum thread has 3 replies.

Reply to Kick a** two strokes! 5/16/2018 8:37 AM

Yes! I was hoping id build a bad enough bike to make it on this thread without having to post it myself

Reply to [FINISHED] ‘06 CR250 Factory Honda Build 5/7/2018 1:21 PM

that’s a good question. they came in the extra parts bin when i bought the bike. i’m sure you can find them on ebay or call renthal directly if they are not available on the several mx parts websites.

Reply to [FINISHED] ‘06 CR250 Factory Honda Build 5/5/2018 11:39 AM

... more »
Reply to [FINISHED] ‘06 CR250 Factory Honda Build 5/4/2018 1:59 PM

i made “custom clamps” because yes, i wanted the newer style front end plastics and i wanted a different offset, but also if i ever did want to upgrade to the bigger forks i would just have to bore out the clamps, which i can do in our machine shop. ... more »

Reply to CR250 Keihin Conversion - JD Jetting Help 5/4/2018 11:23 AM

Can anyone help with jetting? I'm in no way a jetting guru. Stock bore/stroke. PC pipe shorty exhaust. Straight VP T2 40:1. 500' elevation. Texas climate. Says to start in the middle with the needles at Red #3 and a 172 main. Doesn't look like it came ... more »

Reply to [FINISHED] ‘06 CR250 Factory Honda Build 5/3/2018 9:10 AM

sooooooo ready to rip this thing. also just got the Keihin in today from JD Jetting. Will post pics when I install it even though that's not really cool to look at. Ended up getting the short body for peace of mind.

... more »