Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 5/7/2018 1:21 PM

that’s a good question. they came in the extra parts bin when i bought the bike. i’m sure you can find them on ebay or call renthal directly if they are not available on the several mx parts websites.

Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 5/5/2018 11:39 AM

... more »
Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 5/4/2018 1:59 PM

i made “custom clamps” because yes, i wanted the newer style front end plastics and i wanted a different offset, but also if i ever did want to upgrade to the bigger forks i would just have to bore out the clamps, which i can do in our machine shop. ... more »

Added reply in a thread CR250 Keihin Conversion - JD Jetting Help 5/4/2018 11:23 AM

Can anyone help with jetting? I'm in no way a jetting guru. Stock bore/stroke. PC pipe shorty exhaust. Straight VP T2 40:1. 500' elevation. Texas climate. Says to start in the middle with the needles at Red #3 and a 172 main. Doesn't look like it came ... more »

Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 5/3/2018 9:10 AM

sooooooo ready to rip this thing. also just got the Keihin in today from JD Jetting. Will post pics when I install it even though that's not really cool to look at. Ended up getting the short body for peace of mind.

... more »
Started new thread CR250 Keihin Conversion - JD Jetting Help 4/30/2018 10:48 AM

I have an 06 CR250 and the slide on my Mikuni is all broken at the bottom so I was just going to go ahead and do the Keihin conversion. I have a few questions. First, does it use the same throttle cable? Second, does the TPS plug right into the CR plug? ... more »

This forum thread has 5 replies

Added reply in a thread 2017 crf450r forks and clamp 4/26/2018 1:36 PM

Are these spring forks? Will the wheel/brake caliber fit from a 06 CR250? I know id need to bore my clamps

Added reply in a thread WTB 05-13 Honda CR/CRF250 Showa Suspension 4/26/2018 11:42 AM

or may be interested in a set of A kit

Started new thread WTB 05-13 Honda CR/CRF250 Showa Suspension 4/26/2018 11:34 AM

looking for a set of used suspension for my 06 CR250. 47 or 48mm Showa forks with either rear shock so I can do the works to it. Doesn't have to be in perfect condition. preferably looking for 10-13 CRF so I can go a bit more modern but open to everything ... more »

This forum thread has 2 replies

Started new thread WTB Fox Proframe Chest Pro in Hi-Vis color 4/16/2018 1:09 PM

Small/Medium Anyone out there have

This forum thread has 1 reply

Started new thread Works Pipe 4/12/2018 6:40 AM

does anyone know how to get the pipe silver like this? works pipes typically have the heat lines from the welds and the rest of the pipe is darker but it looks like the factory guys got rid of most of the heat lines and got them looking trick and bright

... more »

This forum thread has 6 replies

Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 4/11/2018 7:02 PM

does anyone know how to get the pipe silver like this? works pipes typically have the heat lines from the welds and the rest of the pipe is darker but it looks like the factory guys got rid of most of it and got them looking trick and silver. any

... more »
Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 4/11/2018 9:14 AM

got the clutch cover stripped. not satisfied with the finish yet, going to scuff it up a bit more. got all the rest of the parts in but still waiting on suspension and graphics

Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 4/5/2018 7:53 PM

just degreaser and maroon scotchbrite. lots and lots and lots of scrubbing. for the tight spaces i used a scuffball on a power drill. most of the engine parts are cast so i thought the mag wheel cleaner would work- and it did for the most part but it ... more »

Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 4/5/2018 11:03 AM

sneak peek ... more »
Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 4/5/2018 5:39 AM

ive got applied making me a set of 09-18 450 clamps to match my fork bore so i don’t have to modify the plastics.

Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 4/5/2018 5:23 AM

i opted out of the full restyle kit. i like the older look with the exception of the front end. i’m going to do the ‘13-16 Honda look on the front.

Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 4/4/2018 6:44 PM

Here are a few of the parts that will be going on the bike. i guess i forgot to mention that pretty much every part that was taken off was taken apart, cleaned, scuffed, and/or greased. i figured that could go without mentioning but i don’t ... more »
Added reply in a thread [FINISHED] ‘06 CR250 Factory Honda Build 4/4/2018 6:34 PM

i’m guessing the guy before me didn’t like that very much and filled in the rub marks with welds. it looks pretty good, i’d rather that than gouge marks on it.